CNC gezer kolon freze makinesi

ANAYAK HVM 3800

Durumu: kullanılmış, CNC Traveling Column Boring and Milling Machine ANAYAK Model HVM-3800-P Bed Type Milling Machine, design similar to a floor-type boring mill with fixed table Machine No.: M-20021203 Year of manufacture: 2002 Travel (X): 3200 mm, (Y): 1200 mm, (Z): 1500 mm Table size: 3800 x 1200 mm T-slots: 8 slots, 22 mm width, 130 mm spacing Table load capacity: max. 25 tons (fixed table – practically unlimited load) Spindle taper: ISO 50 (DIN69871-A) (pull stud DIN 69872-B) Spindle speed: 60–4000 rpm, infinitely variable Feed rate: up to 10,000 mm/min, infinitely variable Rapid traverse (X + Y): 20 m/min Rapid traverse (Z): 10 m/min Spindle drive: 22 / 30 kW Electrical connection: 400 Volt, 50 Hz, 50 kVA - Automatic tool changer for 30 tools - Spindle drive with 2 speed ranges - With automatic tool changer and tool magazine - Orthogonal milling head with hydro-mechanical tool clamping - Orthogonal milling head fully automatic swiveling in two 45° planes (B+C axis) - HEIDENHAIN iTNC 530 control, with electronic handwheel Bodpfx Adsxcgtge Nelp - Prepared for wireless probing system (probe and receiver not included) - Additional high-frequency spindle 18,000 rpm – mountable - Control cabinet adjacent - Chip conveyor installed between traveling column bed and machine table - 32,078 operating hours shown - Coolant system - Hydraulic power unit adjacent - Operating manual with circuit diagrams Machine footprint: (L x W) approx. 1000 x 700 cm Machine height: approx. 410 cm Weight (total): approx. 33 tons Good condition Direct from site Kassel, loaded free of charge – immediately available

Durumu: iyi (kullanılmış), Üretim yılı: 2001, X ekseni hareket mesafesi: 3.200 mm, Y ekseni hareket mesafesi: 1.200 mm, Z ekseni hareket mesafesi: 1.460 mm, masa uzunluğu: 3.800 mm, masa genişliği: 1.000 mm, masa yükü: 30.000 kg, Chip conveyor Double doors at the front Chain-type tool changer (30 positions) Central lubrication Internal coolant supply 16 bar and 2.2 kW, delivery rate 16 l/min Tool clamping force: 1968 daN Complete documentation and single-owner machine X-axis: 3200 mm Y-axis: 1200 mm Z-axis: 1460 mm Bodpfx Adoxc Hh Do Njlp Table length: 3800 mm Table width: 1000 mm Table load capacity: 30000 kg Spindle power: 41 kW Spindle speed: 3000 rpm Tool holder: ISO 50 / BT / MK X-axis feed rate: 10000 mm/min Y-axis feed rate: 10000 mm/min Z-axis feed rate: 10000 mm/min Milling head auto-index: 2.5 x 2.5° Operating hours: 10,659 h Length: 8,820 mm Width: 6,250 mm Height: 3,910 mm Weight: 33,000 kg Please note: The information on this page has been provided to the best of our knowledge and, where possible, obtained from the manufacturer. The information is given in good faith, but accuracy cannot be guaranteed. As such, this does not constitute representations or contractual terms. We recommend verifying all essential details.