Balya presi

ANIS ATS 110-75S-9CT-30kW

For sale here is an ANIS ATS 110-75S-9CT-30kW baler including cross-tying (9-fold strapping).

The baler is in good technical condition and has only been used occasionally.

PRESS DIMENSIONS
- Total length: 9,700 mm
- Total width: 3,700 mm
Hfjdpjy Ayiqofx Ag Hsf
- Transport width: 2,300 mm
- Height including hopper: 3,640 mm
- Total weight approx.: 24 t
- Floor pressure approx. 5 kg/cm²
- Heaviest part of the machine weighs approx. 6 tons

HOPPER OPENING
- Length: 1,600 mm
- Width: 1,200 mm
- Inspection door (glass)

PRESS CHAMBER
- Ram stroke length: 2,600 mm
- WxH: 1,100 x 770 mm
- Volume: 2.2 m³
- The ram runs on solid rollers and is equipped with knives to cut off residual material.
- The pressure application to the press chamber (channel) is achieved by two lateral cylinders and a simple lever system, ensuring regular and uniform force distribution.

HYDRAULIC SYSTEM
- E-motor: Siemens 4-pole, 400V-50Hz, 30 kW
- Hydraulic pump (Bucher): Constant/displacement: 320 / 400 bar
- Max. working pressure: 290 bar
- Denison hydraulic valves: 24 VDC
- Pressure monitoring with proportional valve cycle
- Automatic oil temperature monitoring
- Automatic oil filter monitoring
- Automatic oil level monitoring
- Oil capacity: 600 L
- Max. pressing force: 740 kN / 74 t
- Specific pressure: 87 N/cm²

SYSTEM OUTPUT
- Volume per pressing operation including pre-compression: 1.76 m³
- Average cycle time per press cycle approx. 40+8 sec.
- Cycle time per press cycle without material: 22+8 sec.
- Tying time: 30 sec.
- Theoretical volume without tying: 1.84 m³/h
- Average working volume: 123 m³/h
- Capacity with material density of 30 kg/m³: 3-4 t/h

BALES
- Bale length: 500 - 2,000 mm
- Bale width: 1,100 mm
- Bale height: 770 mm

Bu ilan otomatik olarak tercüme edildiğinden bazı çeviri hataları oluşmuş olabilir.