Kütük ev frezesi Auertech BL 100

Auertech BL 100

Log house milling machine

Year of manufacture: 2005

Blockhausfräse BL100A – Four-Head Unit
For producing chalet corner joints by milling all four sides of the log beam in a single setup using 2x vertical and 2x horizontal milling spindles.

Working dimensions: 140 x 200 mm
Milling spindles: Ø 30 mm
Cutter: Ø x width max. 4 x 220 x 100 mm
Motor power: 4 x 3.0 kW
Spindle speed: 4,200 rpm
Feed: Hydropneumatic, infinitely adjustable with rapid traverse!
Operation: Actuated via two-hand control / via control system
Milling depth adjustment: Spindle, digital counter!
Workpiece clamping device: 2 x vertical pneumatic clamps
Extraction: Underfloor extraction funnel, Ø160 mm
Complete with electrical equipment, PLC control, and pneumatics. Machine frame prepared for installing end groove and drilling units as well as a cross-cut saw. Enclosed machine housing with lift-up protective hood (gas spring supported) and viewing window. Electrical control cabinet on base with 3.0 m cable conduit. – Ready for operation, but without cutters!

2 Horizontal Clamps integrated in the BL100 machine table
Activation: Pneumatic from the front
Automatic clamping cycle via PLC control.

End Groove Milling Unit
Milling spindle: Ø 30 mm
Cutter: Ø x width max. 180 x 40 mm
Motor power: 3.0 kW
Spindle speed: 4,200 rpm
Feed: Hydropneumatic, infinitely adjustable with rapid traverse!
Height adjustment: Spindle, digital counter!
Workpiece clamping device: 1 x additional vertical pneumatic clamp
Integrated in the BL100. With electrical and pneumatic equipment. Ready for operation, but without cutter!

Horizontal Drill Unit with Drill Guide and Chip Guard
Drill: Ø max. 30 mm
Motor power: 1.1 kW
Speed: 1,500 rpm
Feed: Pneumatic, infinitely adjustable. With rapid traverse for idle stroke
Height adjustment: Spindle, digital counter!
Workpiece clamping device: 1 x additional vertical pneumatic clamp
Integrated in the BL100. With electrical and pneumatic equipment. Ready for operation, supplied with Ø20 mm drill bit!

Under-table Cross-cut Circular Saw in BL100A – Only for automatic operation!
Max. cutting dimensions (W x H): 200 x 140 mm
Saw blade: Ø 500 mm
Motor power: 4.0 kW
Cutting speed: 86 m/s
Feed: Pneumatic
Operation: Only via program automation (not included)
Workpiece clamping device: Pneumatic
Extraction funnel: Ø120 mm
Integrated in the BL100A. With electrical and pneumatic equipment – Ready for operation including saw blade!

Prepared for Automatic Operation
Includes sliding table (mechanics, pneumatics & electrics) for the end groove milling unit and the electrical interface for external Tigerstop controller operation of BL100A functions.

Infeed table length: 9 m
Outfeed table length: 4 m

Lhsdpfx Adjywpt Ujpod
Further technical description to follow.

Availability: End of March / early April 2026
Location: Netherlands

Bu ilan otomatik olarak tercüme edildiğinden bazı çeviri hataları oluşmuş olabilir.