Kütük ev frezesi Auertech BL 100

Auertech BL 100

Used machine

Year of manufacture: 2005

Equipment and technical data:

- Blockhouse milling machine BL100A – quadruple unit

- For production of chalet corner joints by milling all four sides of the log plank in a single setup, using 2 × vertical and 2 × horizontal milling spindles

- Working dimensions: 140 × 200 mm

- Milling spindles: Ø 30 mm

- Milling cutter: max. 4 × 220 × 100 mm

- Motor power: 4 × 3.0 kW

- Spindle speed: 4,200 rpm

- Feed: hydro-pneumatic, infinitely variable, with rapid traverse

- Operation: two-hand control / via PLC control

- Milling depth adjustment: spindle, digital counter

- Workpiece clamping device: 2 × vertical pneumatic clamps

- Extraction: underfloor hopper Ø 160 mm

- Equipment: complete with electrical system, PLC control, and pneumatics

- Machine stand: prepared for end-groove unit, drilling unit, and cross-cut saw

- Machine enclosure: enclosed, lift-up safety cover (gas strut) with viewing window

- Control cabinet: on base with 3.0 m cable duct

- Delivery condition: ready for operation, without tools

- Horizontal clamps in machine table: 2 units

- Actuation: pneumatic from the front

- Clamping cycle: automatic via PLC control

- Integrated end-groove unit

- Milling spindle: Ø 30 mm

- Milling cutter: max. 180 × 40 mm

- Motor power: 3.0 kW

- Spindle speed: 4,200 rpm

- Feed: hydro-pneumatic, infinitely variable, with rapid traverse

- Height adjustment: spindle, digital counter

- Workpiece clamping device: 1 × additional vertical pneumatic clamp

- Equipment: integrated, with electrical and pneumatic system, without milling cutter

- Integrated horizontal drilling unit with drill guide and splinter protection

- Drill diameter: max. 30 mm

- Motor power: 1.1 kW

- Spindle speed: 1,500 rpm

- Feed: pneumatic, infinitely variable, with rapid traverse for idle stroke

- Height adjustment: spindle, digital counter

- Workpiece clamping device: 1 × additional vertical pneumatic clamp

- Equipment: integrated, with electrical and pneumatic system, incl. drill Ø 20 mm

- Integrated under-table cross-cut circular saw (automatic operation only)

- Max. cutting dimensions: 200 × 140 mm (W × H)

- Saw blade diameter: 500 mm

- Motor power: 4.0 kW

- Cutting speed: 86 m/s

- Feed: pneumatic

- Workpiece clamping device: pneumatic

- Extraction: extraction hopper Ø 120 mm

- Equipment: integrated, with electrical and pneumatic system, incl. saw blade

- Prepared for automatic operation

- Sliding table: mechanics, pneumatics, and electrics for end-groove milling

- Interface: electrical for control via external Tigerstop control

- Infeed table length: 9,000 mm
Gsdpsyxyanofx Ahksit

- Outfeed table length: 4,000 mm

Availability: short term

Location: Röllbach

Bu ilan otomatik olarak tercüme edildiğinden bazı çeviri hataları oluşmuş olabilir.