Kenar bantlama makinesi

Brandt Highflex 1650 vario

Brandt edge banding machine with AIRTEC + jointing unit

Glue: EVA / PUR / Airtec

Coil material 0.4-3 mm edge thickness
Strip material 0.4-15 mm (12 mm) edge thickness

Workpiece thickness 8-60 mm

Recently serviced!

Jointing unit

OVERVIEW OF UNIT CONFIGURATION:
JOINTING MILLING UNIT 2 X 2.2 KW 200 HZ
EDGING UNIT A12
TRIMMING UNIT CHAMFER/STRAIGHT 2 X 0.35 KW
PNEUMATIC ADJUSTMENT TRIMMING CHAMFER/STRAIGHT
PNEUMATIC 2-POINT ADJUSTMENT TRIMMING
PRE-MILLING UNIT 2 X 0.55 KW 0 DEGREES
PNEUMATIC 2-POINT ADJUSTMENT
MULTIFUNCTION PROFILE MILLING UNIT 2 X 0.4 KW

PROFILE SCRAPER WITH QUICK-CHANGE HEADS
PNEUMATIC ADJUSTMENT OF SCRAPER
GLUE JOINT SCRAPER
BUFFING UNIT

Feed rate 8-18 m/min, with profile milling: 14 m/min
Total length: 5760 mm

Coil material 0.3-3 mm
Strip material 3-15 mm
(When using the VKNR 4845 exchangeable milling units, the max. edge thickness is 12 mm!)
Dedpfxsyz Sxbe Aagjur

EDGING UNIT A12
WORKPIECE PRE-HEATING
QUICKMELT APPLICATION UNIT
ADHESIVE REACTIVATION infrared

Workpiece return system BOOMERRANG TFU 140/R 20
Year of manufacture: 2016
As shown in the picture

Available free from November 2026

All data based on the data sheet, therefore not guaranteed

Technical data available on request

Bu ilan otomatik olarak tercüme edildiğinden bazı çeviri hataları oluşmuş olabilir.