Kenar bantlama makinesi

Brandt KDF 440 Edition

Brandt KDF 1440 Edition

Only 1,700 operating hours – very good condition – can also be supplied with pre-heating station XES 200 Autark (+ €4,500)

AGGREGATE CONFIGURATION OVERVIEW:
- Jointing Milling Unit: 2 x 2.2 kW, 200 Hz
- Gluing Unit: QA 65 N
- End Trimming Unit Bevel/Straight: 2 x 0.18 kW
- Pneumatic Adjustment for End Trimming Bevel/Straight
- Multi-stage Milling Unit MS 40, counter-rotation
- Pneumatic 2-point adjustment
- Profile Milling Unit: 1 x 0.35 kW, WD 60; also suitable for construction flooring
- Pneumatic 2-point adjustment, Radius/Bevel
- Multi-stage Scraper Unit MZ 40
- Glue Joint Scraper
- Buffing Unit
- Top Pressure: PU rollers instead of standard rollers
- Additional gluing unit QA 65 N (interchangeable)
- Separating Agent Spraying Unit for workpieces
- Automatic Edge Feed
- Multi-roller tracing system for multi-stage milling unit MS 40 + multi-stage scraper MZ 40
- Cleaning Agent Spraying Unit

WORKPIECE AND EDGE PARAMETERS:
– Minimum workpiece width:
– For workpiece thickness 8–22 mm: 70 mm*
– For workpiece thickness 23–40 mm: 120 mm*
– For workpiece thickness 41–60 mm: 150 mm*
(*Depending on workpiece length)
– Workpiece overhang: 38 mm
– Workpiece thickness: 8–60 mm
– Maximum edge height = workpiece height + 6 mm
Kodpjzb Iggofx Ac Hena
– Edge material (coil): 0.4–3 mm
– Maximum edge cross-section:
– PVC: 135 mm²
– Veneer: 100 mm²
– Maximum coil diameter: 830 mm
– Edge material (strips): 0.4–8 mm
– Maximum edge cross-section (strips): 360 mm²

– Feed rate: 8–14 m/min
– Maximum feed rate with profile milling: 11 m/min
– Working height: 950 mm
– Pneumatic connection: min. 6 bar
– Total length: 5,573 mm

Complete description: see PDF

Bu ilan otomatik olarak tercüme edildiğinden bazı çeviri hataları oluşmuş olabilir.