Kenar bantlama makinesi

BRANDT KDF 550 C

EDGE BANDER WITH JOINTING AND COPY MILLING; SEPARATING AGENT APPLICATION, MACHINE USED FOR PUR BONDING^

Technical Data:
Workpiece thickness: 8 - 50 mm
Edge thickness:
* Pre-cut strips: 0.4 - 8.0 mm
* Coil material: 0.4 - 3.0 mm (max. 0.8 x 55 mm, or 3 x 45 mm)
Feed speed: 11 m/min
Electrical: 400 V, 50 Hz, 3 phase
Bwsdpfx Adjyrfh Nstji

Equipment:
Adjustable infeed fence
Centrally adjustable top pressure
Central manual chain track lubrication
Control panel at machine infeed

Separating agent application

Jointing milling unit: 2 x 2.2 kW
1 x with and 1 x against feed direction
Max. chip removal: 3 mm

Gluing station with with and against feed direction
1 main pressure roller and 2 follow-up pressure rollers

End trimming unit: 2 x 0.18 kW
Pulling cut for high accuracy
Pneumatic adjustment for straight and bevel trimming via program

Flush milling unit: 2 x 0.55 kW
With vertical and horizontal tracing
2 selectable working positions via program: flush/radius milling, all adjustment axes with digital readouts for quick setup

Profile milling unit: 2 x 0.35 kW
For profiling end edges
Max. edge thickness: 3 mm
Max. workpiece thickness: 55 mm
With pneumatic 2-point adjustment for bevel/radius

Profile scraper unit with quick-change heads
Tracing from top, bottom, and side
With 2 additional quick-change heads

Glue joint scraper device, pneumatically controlled
Tracing from top and bottom

Cleaning agent application

Buffing unit: 2 x 0.09 kW
With cleaning agent application

Control system:
POWER CONTROL PC 20 +

Bu ilan otomatik olarak tercüme edildiğinden bazı çeviri hataları oluşmuş olabilir.