Sıcak hava fırınıCompactsystem
MARTINA 120
Sıcak hava fırını
Compactsystem
MARTINA 120
sabit fiyat KDV hariç
€7.900
Üretim yılı
2025
Durumu
Yeni
Konum
Leipzig 

Resimleri göster
Haritayı göster
Makineye ait bilgiler
- Makine tanımı:
- Sıcak hava fırını
- Makine üreticisi:
- Compactsystem
- Model:
- MARTINA 120
- Üretim yılı:
- 2025
- Durumu:
- yeni
Fiyat ve Konum
sabit fiyat KDV hariç
€7.900
- Konum:
- Leipzig

Ara
Teklif detayları
- Listeleme kimliği:
- A185-39731
- Referans no.:
- 1327-10322
- Son güncelleme tarihi:
- 15.12.2025
Açıklama
Dimensions (LxWxH): 800 x 1170 x 2300 mm
Weight: 650 kg
Total power requirement: 1.05 kW
Hot Air Furnace MARTINA 120
The MARTINA hot air furnaces offer an ideal solution for energy utilization in woodworking industries and craft businesses.
Iodpfx Aovz Hhxsg Nstb
They are designed for heating larger areas such as workshops and production halls in both craft and industrial settings.
These hot air systems do not require long heat-up phases and can heat up a joinery, carpentry workshop, or other production facilities in a very short time.
Fuel sources include solid wood and its by-products such as offcuts from solid wood panels, chips, sawdust, pellets, or briquettes.
MARTINA hot air furnaces comply with EU Directive 98/37EC, Italian Presidential Decree No. 459 of 24 July 1996, and Safety Directive Annex 89/392 EC.
All hot air furnaces in the MARTINA series – 15, 30, 55, 85, 120, 180, 240, 350 – meet both emission levels required by the 1st BImSchV (German Federal Immission Control Ordinance).
- Automatic and continuous air operation
- Thermal output: 145 kW
- Thermal output: 125,000 kcal
- Fuel consumption: 30 kg/h
- Air output: 9,000 m³/h
- Combustion chamber depth: 950 mm
- Loading door: 460 x 440 mm
- Hot air blower: 1.05 kW / 230 V
- Combustion chamber negative pressure: 0.2 - 0.3 mbar
- Flue draught at rated output: 0.18 mbar
- Heated volume: approx. 2,500 m³
- Heated area: approx. 500 m²
- Space requirements: Width 800 mm, Depth 1170 mm, Height 2300 mm
- Weight: 650 kg
- Flue outlet diameter (fitting): 200 mm
- Chimney diameter (recommended): 250 mm
- Efficiency: 85-90%
- Chimney draft: 16 Pa
- Exhaust gas temperature: 287°C
- Hot air outlet connections: 2 x Ø220 mm
- For further data, please see the attached data sheet
The two pipe sockets for hot air discharge are located at the lower rear section of the furnace.
A maximum of 20 meters of ducting per outlet is permitted for air distribution.
Bu ilan otomatik olarak tercüme edildiğinden bazı çeviri hataları oluşmuş olabilir.
Weight: 650 kg
Total power requirement: 1.05 kW
Hot Air Furnace MARTINA 120
The MARTINA hot air furnaces offer an ideal solution for energy utilization in woodworking industries and craft businesses.
Iodpfx Aovz Hhxsg Nstb
They are designed for heating larger areas such as workshops and production halls in both craft and industrial settings.
These hot air systems do not require long heat-up phases and can heat up a joinery, carpentry workshop, or other production facilities in a very short time.
Fuel sources include solid wood and its by-products such as offcuts from solid wood panels, chips, sawdust, pellets, or briquettes.
MARTINA hot air furnaces comply with EU Directive 98/37EC, Italian Presidential Decree No. 459 of 24 July 1996, and Safety Directive Annex 89/392 EC.
All hot air furnaces in the MARTINA series – 15, 30, 55, 85, 120, 180, 240, 350 – meet both emission levels required by the 1st BImSchV (German Federal Immission Control Ordinance).
- Automatic and continuous air operation
- Thermal output: 145 kW
- Thermal output: 125,000 kcal
- Fuel consumption: 30 kg/h
- Air output: 9,000 m³/h
- Combustion chamber depth: 950 mm
- Loading door: 460 x 440 mm
- Hot air blower: 1.05 kW / 230 V
- Combustion chamber negative pressure: 0.2 - 0.3 mbar
- Flue draught at rated output: 0.18 mbar
- Heated volume: approx. 2,500 m³
- Heated area: approx. 500 m²
- Space requirements: Width 800 mm, Depth 1170 mm, Height 2300 mm
- Weight: 650 kg
- Flue outlet diameter (fitting): 200 mm
- Chimney diameter (recommended): 250 mm
- Efficiency: 85-90%
- Chimney draft: 16 Pa
- Exhaust gas temperature: 287°C
- Hot air outlet connections: 2 x Ø220 mm
- For further data, please see the attached data sheet
The two pipe sockets for hot air discharge are located at the lower rear section of the furnace.
A maximum of 20 meters of ducting per outlet is permitted for air distribution.
Bu ilan otomatik olarak tercüme edildiğinden bazı çeviri hataları oluşmuş olabilir.
Tedarikçi
Not: Ücretsiz kaydolun veya giriş yapın, tüm bilgilere erişmek için.
İlk kayıt tarihi: 2003
İstek gönder
Telefon & Faks
+49 341 9... ilanlar
İlanınız başarıyla silindi
Bir hata oluştu





















