Nemli 600 litre

CTS Klimaprüfschrank C-70/600 -70°C bis +180°C

Koşul: mükemmel (kullanılmış), CTS Climate Test Chamber C-70/600 Device Data Manufacturer: CTS GmbH Model: C-70/600 Version: Climate Test Chamber Cooling: Water-cooled Description Used climate test chamber from CTS. Suitable for temperature and climatic testing. Intended for use in research, development, and quality assurance. Operating Condition Display: Manual operation / Stop. Temperature: 16.59 °C (actual) / 5.00 °C (setpoint). Humidity: 39.7% rH. Water reservoir: 11.0 l. Technical Data Temperature range: -70 °C to +180 °C Humidity range: 10% to 98% rH Dew point range: -10 °C to +94 °C Test chamber volume: 600 liters Electrical Data 400 V / 3/N / 50 Hz Power: 8.7 kW Current: 14.8 A Protection rating: IP 22 Refrigeration System Refrigerants: R404A / R23 Cascade refrigeration system Low-temperature operation down to -70 °C PS: 25 bar PT: 27.5 bar Equipment Observation window Stainless steel test chamber Digital setpoint/actual value display Test item protection / temperature limiter Water connection (deionized water) Condensate drain Tube lead-throughs RS232 interface Digital outputs Dimensions Interior: approx. 850 x 850 x 830 mm Exterior: approx. 1900 x 1115 x 1850 mm Weight Approx. 600 kg Scope of Delivery CTS Climate Test Chamber C-70/600 Documentation (where available) Pre-delivery service (optional): - Function test - Refrigerant service - Leak test - Test run with protocol Gjdpfsy H H D Aex Ahkebl Condition Used. Condition as shown in photos. Notice Used device, sale without warranty. Inspection possible by arrangement. Loading and transport can be organized on request. Subject to change and prior sale. If you have any questions, feel free to contact us.

Koşul: mükemmel (kullanılmış), CTS Climate Test Chamber CS-70/600-5/S Device Data Manufacturer: CTS GmbH Model: CS-70/600-5/S Design: Climate Test Chamber Cooling: Water-cooled Description Used climate test chamber by CTS. Suitable for temperature, climate, and stress screening tests. Designed for use in industry, research, and quality assurance. Operating Condition Display: Manual operation / Warning (bleed water bath). Operating Hours Total: 19,788 h Compressor Cooling: 8,699 h Compressor Pre-cooling: 11,432 h Circulation Pump: 2,905 h Technical Data Temperature range: -70 °C to +180 °C Humidity range: 10% to 98% rH Dew point range: -10 °C to +94 °C Test chamber volume: 600 litres Electrical Data 400 V / 3/N / 50 Hz Power: 18.4 kW Current: 30.6 A Protection rating: IP 22 Refrigeration System Refrigerants: R404A / R23 Pre-cooling stage: 5.0 kg Cooling stage: 2.1 kg / 14.5 bar CO₂ equivalent: 19.61 t / 30.93 t GWP: 3922 / 14800 Pressure Data PS: 25 bar PT: 27.5 bar Equipment Gedpey H Hmwofx Ahkebl Observation window Stainless steel test chamber CTS touch/LCD control panel Programmable operation Test item protection / temperature limiter Water-cooled refrigeration unit Humidity system with water bath Automatic water replenishment possible Interfaces (RS232 / Ethernet) Integrated control cabinet Industrial design Feedthroughs 1x NW 50 2x NW 125 Dimensions Internal: approx. 850 x 850 x 830 mm External: approx. 1900 x 1120 x 1875 mm Weight approx. 750 kg Scope of Delivery CTS Climate Test Chamber CS-70/600-5/S Documentation / Test certificates (if available) Pre-Delivery Service (optional) Function test Refrigerant service Leakage test Test run with protocol Condition Used. For visual condition please see pictures. Note Used equipment, sold without warranty. Inspection possible by appointment. Loading and transport can be organized on request. Subject to prior sale and changes. If you have any questions, please feel free to contact us.

Koşul: mükemmel (kullanılmış), CTS Type: CS-70/600-5 Climate Test Chamber CTS CS-70/600-5 Water-cooled version with viewing window, specimen protection, and documentation For sale is a high-quality CTS climate test chamber type CS-70/600-5 for precise temperature, climate, and stress screening tests in research, development, quality assurance, and industrial applications. The device is in used condition and is fully visible as per the photos. Current display: Manual operation / Stop. Operating hours as per the display: Technical data: Temperature range: -70 °C to +180 °C Humidity range: 10% to 98% RH Dew point range: -10 °C to +94 °C Test chamber volume: 600 liters Temperature change rate according to IEC 60068-3-5: Heating: 6.0 K/min Cooling: 7.0 K/min Electrical connection: 400 V 3/N 50 Hz Rated power: 14.6 kW Rated current: 22.0 A Protection class: IP 22 Refrigerant: R404A / R23 Pre-cooling stage: R404A – 4.5 kg Cooling stage: R23 – 2.1 kg / 14.5 bar CO2 equivalent: 17.65 t / 31.08 t GWP: 3922 / 14800 Operating overpressure PS: 25 bar Test pressure PT: 27.5 bar Features / Equipment: Viewing window in the door Stainless steel test chamber LED chamber lighting CTS LCD control panel with digital controls Specimen protection / temperature limiter Water-cooled refrigeration unit Automatic water replenishment / DI water inlet Chamber and condensate drain Volt-free contact Digital outputs RS232 interface Ethernet interface Lateral tube feedthroughs Tube feedthroughs as per site plan: 1x feedthrough NW 50 2x feedthrough NW 125 Test chamber dimensions (as per site plan): approx. 850 x 850 x 830 mm External dimensions (as per site plan): approx. 1900 x 1120 x 1875 mm Weight / mass as per documentation: approx. 750 kg Scope of delivery: CTS climate test chamber CS-70/600-5 Including available documentation / test certificates Scope of delivery as pictured For your safety as the buyer: The device can be inspected by prior arrangement. Loading by forklift can be organized. If you have any questions, we are happy to help. Information for your safety as the buyer! The following points are carried out in advance on our offered chambers: 1. Functional check and replacement of necessary components 2. If necessary, new filling with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, the chambers undergo a documented test run. Condition: used (Subject to changes and errors in technical data and specifications!) Further questions can be answered by phone. Godpfx Ahoy Hkbleksbl

Koşul: mükemmel (kullanılmış), CTS Type: C-70/600 Climate Test Chamber CTS C-70/600 Water-cooled design With observation window, test item protection, and documentation For sale is a high-quality CTS climate test chamber, type C-70/600, suitable for precise temperature and climate testing in research, development, quality assurance, and industrial applications. The unit is in used condition and is fully visible as shown in the images. The current display shows manual operation / stop, actual temperature 16.59°C, setpoint 5.00°C, actual humidity 39.7% r.h., and actual water supply level 11.0 l. Technical data: Temperature range: -70°C to +180°C Gbsdpfx Asy Hkazjhkol Humidity range: 10% to 98% r.h. Dew point range: -10°C to +94°C Test chamber volume: 600 liters Power supply: 400 V 3/N 50 Hz Rated power: 8.7 kW Rated current: 14.8 A Protection class: IP 22 Refrigerants: R404A (pre-cooling stage) / R23 (cooling stage) Cascade refrigeration system for low-temperature operation down to -70°C Operating overpressure PS: 25 bar Test pressure PT: 27.5 bar Equipment / Features: - Observation window in the door - Stainless steel test chamber - CTS control panel with digital actual/setpoint display - Test item protection / temperature limiter - Water connection / demineralized water inlet - Test chamber and condensate drain - Cable ports on the side of the chamber - RS232 interface according to documentation - Digital outputs for test item control Test chamber dimensions (according to documentation): Approx. 850 x 850 x 830 mm External dimensions (according to documentation): Approx. 1900 x 1115 x 1850 mm Weight (according to documentation): approx. 600 kg Scope of delivery: CTS climate test chamber C-70/600 Including available documentation / operating manuals Scope of delivery as shown in the images Security for you as the buyer: The unit can be inspected by prior arrangement. Forklift loading can be organized. For your safety as the buyer, the following work is carried out in advance on our offered chambers: 1. Functional check and replacement of necessary components 2. If required, refilling with legally compliant refrigerant 3. Leak test with certificate 4. After successful testing, the chambers undergo a documented test run. Condition: used (Changes and errors in the technical data, specifications are subject to change!) Please feel free to contact us by phone for further questions.