Sıcak: +50°C / +200°C Soğuk: -80°C / +100°C

CTS Temperaturschock-Prüfschrank TSS-70/130 130 Liter

CTS Type: TSS-70/130 Water-cooled Refrigeration Unit For sale is a high-quality thermal shock test chamber from CTS (Clima Temperatur Systeme), Model TSS-70/130. This unit is designed for conducting thermal shock tests and is typically used in industry, research, and quality assurance.

Applications:
- Material testing
- Aging tests
- Electronics and component testing
- Thermal shock and temperature cycling tests

Technical specifications:

Type: TSS-70/130
Test volume: 130 liters
Temperature range:
Hot chamber: +50°C to +200°C
Cold chamber: -80°C to +100°C
Heating rate: approx. 6 K/min from ambient temperature to +180°C
Cooling rate: approx. 4 K/min from ambient temperature to -60°C
Temperature deviation:
±1 K over time
±2 K spatially
Temperature change rate:
Max. 100 K/min on average for shock testing
without radiant heat
Transfer rate:
≤ 15 min from -65°C to +200°C with 10 kg of ICs
Switching time:
< 10 seconds
Electrical data:
Connection: 400 V, 3/N, 50 Hz
Rated power: approx. 16.7 kW
Rated current: approx. 26.8 A
Site power protection: 32 A slow-blow
Connection: Cekon 32
Refrigeration system:
Refrigerants: R404A / R23
water-cooled, low-noise, fully hermetic

Features / Equipment:
CTS control panel
Microprocessor-controlled regulation and monitoring system
Programmable operation
up to 100 test programs possible
digital setpoint and actual value display
RS232 interface
2 free switching channels for customer test item control
Fault message via potential-free contact
Load up to 30 V-DC, 2 A
EMC tested

Technical Design:
Hot and cold chamber
Transport basket with spindle drive
Test chamber / basket made of stainless steel, material no. 1.4301
Insert basket made of stainless steel wire
Tube feedthrough NW 50 with closure plug
Compressed air connection 1/4" external thread
Condensate drain, gravity, R 1/2" internal thread
Safety door lock
Lockable door with window

Hodoy Hkfdspfx Anxsl
Dimensions (according to installation sketch):
External dimensions approx.: 2335 x 940 x 1820 mm
Entry dimensions approx.: 1990 x 940 x 1652 mm
Test chamber dimensions: Height approx. 410 mm
Width approx. 480 mm Depth approx. 660 mm
Window: 300 x 300 mm

Additional data:
Protection class: IP 22
Sound pressure level: < 60 dB(A)
Weight: approx. 950 kg
Average consumption in test cycle: approx. 8 kWh

Important information for your safety as a buyer!
The following procedures are completed in advance on our offered chambers:
1. Functional inspection and replacement of necessary components
2. If required, refilling with legally compliant refrigerant
3. Leak test with certificate
4. After successful inspection, the chambers undergo a documented test run.

Condition: used
Scope of delivery: see pictures
(Technical data subject to change and errors!)
If you have additional questions, we will gladly answer them by phone.

Bu ilan otomatik olarak tercüme edildiğinden bazı çeviri hataları oluşmuş olabilir.