5.500 litre (5,5 m³) iklim test hücresi

CTS CW-60/5,5 -60°C bis +100°C

Durumu: mükemmel (kullanılmış), CTS CW-60/5.5 – Water-cooled Climatic Test Chamber The CW-60/5.5 from CTS GmbH (Climatic Test Systems) is a medium-sized, walk-in or drive-in climatic chamber designed for temperature and humidity testing of multiple specimens simultaneously. Device Description The climatic test chamber enables testing of the functionality or material properties of specimens under temperature and humidity influences. Efficient air circulation with a high recirculation volume ensures excellent transfer to the test specimen. The air treatment section is located at the rear of the internal chamber. The plant components are installed behind the unit in a separate frame for easy accessibility. The control system is housed in a separate switch cabinet, and the control panel is integrated into the switch cabinet door. For dehumidification of the test chamber, a self-regenerating compressed air dryer is installed. Fresh air purging of the test room can be performed via a blower. Technical Performance Data: Temperature Tests: - Temperature range: -60 °C to +100 °C - Temperature deviation: ±0.5 to 1 K over time Dodpfx Acox Eaxbswecr - Temperature change rate (linear, measured at supply air with specimen and heat radiation): - Heating: 2 K/min from -40 °C to +85 °C - Cooling: 2 K/min from +85 °C to -40 °C Climatic Tests: - Temperature range: +10 °C to +90 °C - Humidity range: 10% to 95% relative humidity - Dew point range: +5 °C to +89 °C - Temperature deviation: ±0.5 K over time - Humidity deviation: ±1 to ±3% rH over time The above technical data refer to an ambient temperature of +25 °C, nominal voltage 400 V, without specimens, irradiation, or additional equipment. Dimensions: Interior dimensions (test/useable space): - Volume: approx. 5,500 liters (5.5 m³) - Internal dimensions (approx.): Height: ~2000 mm, Width: ~2000 mm, Depth: ~1400 mm (may vary slightly according to configuration) Exterior dimensions: - Height: ~2300–2500 mm, Width: ~2300–2600 mm, Depth: ~1700–2200 mm (depending on door, frame, accessories, etc.) Operating Data: - Electrical connection: 400 V +6/-10%, 3/N, PE, 50 Hz - Rated power: 58.3 kW (incl. 5 socket outlets) - Rated current: 86.0 A - Protection rating: IP 54 Technical Construction: - Refrigeration unit: water-cooled, low-noise, semi-hermetic, infinitely variable capacity control via electronic monitoring and control system - Environmentally friendly refrigerants: R 23 / R 404 A Notes: - Inspection by appointment possible (46325 Borken) - Shipping by freight forwarder possible; costs and arrangements upon request - Delivery contents: (as shown in pictures) (Technical data and information subject to alterations and errors!) For further questions, please feel free to contact us by phone.

Durumu: mükemmel (kullanılmış), CTS CW-60/5.5 – Water-cooled Climatic Test Chamber The CW-60/5.5 from CTS GmbH (Climatic Test Systems) is a medium-sized, walk-in or drive-in climatic chamber designed for temperature and humidity testing of multiple specimens simultaneously. Device Description The climatic test chamber enables testing of the functionality or material properties of specimens under temperature and humidity influences. Efficient air circulation with a high recirculation volume ensures excellent transfer to the test specimen. The air treatment section is located at the rear of the internal chamber. The plant components are installed behind the unit in a separate frame for easy accessibility. The control system is housed in a separate switch cabinet, and the control panel is integrated into the switch cabinet door. For dehumidification of the test chamber, a self-regenerating compressed air dryer is installed. Fresh air purging of the test room can be performed via a blower. Technical Performance Data: Temperature Tests: - Temperature range: -60 °C to +100 °C - Temperature deviation: ±0.5 to 1 K over time - Temperature change rate (linear, measured at supply air with specimen and heat radiation): - Heating: 2 K/min from -40 °C to +85 °C - Cooling: 2 K/min from +85 °C to -40 °C Climatic Tests: - Temperature range: +10 °C to +90 °C - Humidity range: 10% to 95% relative humidity - Dew point range: +5 °C to +89 °C Dcedpfsx Eabpsx Acwer - Temperature deviation: ±0.5 K over time - Humidity deviation: ±1 to ±3% rH over time The above technical data refer to an ambient temperature of +25 °C, nominal voltage 400 V, without specimens, irradiation, or additional equipment. Dimensions: Interior dimensions (test/useable space): - Volume: approx. 5,500 liters (5.5 m³) - Internal dimensions (approx.): Height: ~2000 mm, Width: ~2000 mm, Depth: ~1400 mm (may vary slightly according to configuration) Exterior dimensions: - Height: ~2300–2500 mm, Width: ~2300–2600 mm, Depth: ~1700–2200 mm (depending on door, frame, accessories, etc.) Operating Data: - Electrical connection: 400 V +6/-10%, 3/N, PE, 50 Hz - Rated power: 58.3 kW (incl. 5 socket outlets) - Rated current: 86.0 A - Protection rating: IP 54 Technical Construction: - Refrigeration unit: water-cooled, low-noise, semi-hermetic, infinitely variable capacity control via electronic monitoring and control system - Environmentally friendly refrigerants: R 23 / R 404 A Notes: - Inspection by appointment possible (46325 Borken) - Shipping by freight forwarder possible; costs and arrangements upon request - Delivery contents: (as shown in pictures) (Technical data and information subject to alterations and errors!) For further questions, please feel free to contact us by phone.