5 ACHS işleme merkezi

DMG MORI DMU 60 Evo

Durumu: iyi (kullanılmış), Üretim yılı: 2013, çalışma saatleri: 59.000 h, Fonksiyonellik: tamamen fonksiyonel, Universal Machining Centre DMU 60 eVo Travel (X/Y/Z): 600 / 500 / 500 mm Rapid traverse X-axis: 80 m/min Rapid traverse Y-axis: 80 m/min Rapid traverse Z-axis: 50 m/min Speed range (standard): 20 – 14,000 rpm Motor spindle (power): 18.9 / 14 kW (40/100% duty cycle) Tool holder (standard): SK40 according to DIN 69871 NC swivel rotary table: available Clamping surface (table): 600 × 500 mm Swivel range B-axis: -5° to +110° C-axis: 360° Table load capacity: 400 kg Direct measuring systems: available (direct measuring systems / direct position measuring system) Table cooling: incl. table cooling (mentioned in conjunction with direct measuring systems) Spindle speed (option): 20 – 18,000 rpm (for tool holder HSK-A63 according to DIN 69893) Spindle and tool magazine modification: deviating from standard Spindle speed (max., additional data sheet screenshot): 24,000 rpm Tool magazine (standard): Chain magazine 30 positions, double gripper Tool magazine (option): Tool magazine 60 positions, chain magazine with double gripper (deviating from standard) Control (3D control): Heidenhain iTNC 530 HSCI User interface: SmarT.NC Operator panel: DMG ERGOline® Control Monitor: 19" monitor (mentioned with ERGOline Control) Heat exchanger: Heat exchanger for spindle and table Active cooler: Active cooler for electrical cabinet Full enclosure: available Signal/indicator light: four-color / 4-color (also mentioned in automation) Probe: Infrared probe, Heidenhain TS 649 DMG 3D quickSET toolkit preparation: available 3D quickSET software option: included (per machine) 5-axis machine configurations: only in conjunction with probe option Handling system preparation: PH 150-8 by DMG Automation (preparation mentioned) Chip conveyor: scraper belt chip conveyor with cleaned gap screen Internal coolant supply (ICS): available Paper band filter: 40 bar / 23 l/min / 600 l tank Rotating viewing window: incl. rotating viewing window Seal air: available Linear measurement systems: available Bed flushing: available Rinsing gun for chip removal: available Blow air through spindle center: selectable via M-function Kljdeyl A Dnjpfx Agdjn Compressed air quality: maintained air with low oil content Safety package for power failure: available Surge protector: available Undervoltage monitoring: with rapid braking control Operating mode: 4 Process monitoring: in production Documentation: Documentation-1 German Screen languages: German/English DMG / MORI SEIKI Messenger (promotional offer): Connection of the first machine (SIE 840D; HDH iTNC530; HDH MillPlus iT) DMG Netservice – client: “Green light for your machine”; installation on external PC Automation PH 150-8 with handling system and pallet magazine Automation design: system in automation design, matching the machine Rotary storage: with 8-fold pallet mounts Servo axes: 2 servo axes (X-axis, magazine table) Z-axis: pneumatic Gripper: gripper arm/fork Basic programming: basic system programming IPC: IPC with touch panel Job manager: DMG AUTOMATION Job manager Operator guidance: graphics-supported operator guidance Signal light: 4-color PH 150-8 integration kit: for DMU 50/70, DMU 40/60/80 eVo linear UPC P chuck: Erowa (UPC P chuck, Erowa) UPC pallets: 320 × 320 mm, incl. clamping pins and pallet coupling, Erowa

Durumu: işlem için hazır (kullanılmış), Üretim yılı: 2013, çalışma saatleri: 8.185 h, X ekseni hareket mesafesi: 600 mm, Y ekseni hareket mesafesi: 500 mm, Z ekseni hareket mesafesi: 500 mm, kontrolör üreticisi: HEIDENHAIN, kontrolör modeli: iTNC 530, maksimum mil hızı: 18.000 dev/dak, eksen sayısı: 5, Bu 5 eksenli DMG DMU 60 evo Linear 2013 yılında üretilmiştir ve 600/500/500 mm hareket aralığına, 18.000 rpm'ye kadar iş mili hızına ve 60 pozisyonlu bir takım magazinine sahiptir. Heidenhain iTNC 530 kontrol, 40 bar dahili soğutma sıvısı ve hurda bantlı talaş konveyörü içerir. Karmaşık işleme görevleri için idealdir. Bu makine hakkında daha fazla bilgi için bize ulaşın. • Alet magazini: 60 pozisyon • Hızlı travers: 80 m/dak • Dinamik paket • Dahili soğutma sıvısı: 40 bar • Dönen görüntüleme penceresi • Yıkama tabancalı yatak yıkama sistemi • Çalışma saatleri: 14,471 h • İş mili saatleri: 8,185 h Ek ekipman Klsdjx D Dyaspfx Agden • Hurda bantlı talaş konveyörü • Kağıt bant filtre, 600 litre • Yağ ve emülsiyon buharı ayırıcı • Heidenhain TS 649 dokunmatik prob • 3D quickSET araç seti Technical Specification Taper Size HSK 63

Durumu: mükemmel (kullanılmış), Üretim yılı: 2015, Fonksiyonellik: tamamen fonksiyonel, X ekseni hareket mesafesi: 600 mm, Y ekseni hareket mesafesi: 500 mm, Z ekseni hareket mesafesi: 500 mm, hızlı travers X ekseni: 80 m/dak, hızlı tablası Y ekseni: 80 m/dak, hızlı ilerleme Z ekseni: 50 m/dak, kontrolör üreticisi: Heidenhain, kontrolör modeli: iTNC530, masa yükü: 400 kg, maksimum mil hızı: 24.000 dev/dak, iş mili çalışma saatleri: 15.410 h, takım magazinindeki yuva sayısı: 60, Donanım: devir hızı sonsuz değişken, Machine Description: - Universal 5-axis milling machine with linear drives in the X and Y axes, rapid traverses at 80 m/min - Spindle and machine geometry in excellent condition - Regularly serviced Kodeylunxspfx Agdsln - Last spindle replacement: 09/2023 / New viewing window and Visiport installed in 2025. - Current operating hours: Machine ON: 45,675h / Spindle ON: 15,410h - Machine location: Lower Austria (near Vienna) Travel distances: X-axis (longitudinal): 600 mm Y-axis (cross): 500 mm Z-axis (vertical): 500 mm Clamping table / Working area: Integrated NC rotary table: 600 x 500 mm Table load capacity: 400 kg Control: Heidenhain iTNC530 Spindle: Speed range: 24,000 rpm Tool holder: HSK63 Coolant system and chip disposal: External coolant with 3 nozzles: 4 bar Internal coolant: 40 bar Paper band filter Scraper-type chip conveyor Automatic tool changer: Tool holder: HSK63 Number of positions: 60 Dimensions and weight: Machine: Length 2,900 x Width 2,611 x Height 2,865 mm Weight: ~9,800 kg Additional equipment and accessories: › Heidenhain TS 649 probe › Heidenhain handwheel › Blum laser for tool measurement on the table › Chip washdown pistol › 3D Quick Set › ATC cycle package › Operating mode 4 › Integrated oil mist extraction › Operating manual / documentation › Linear drive dynamics package 80 m/min incl. active cooler

Durumu: mükemmel (kullanılmış), Üretim yılı: 2014, çalışma saatleri: 66.600 h, Fonksiyonellik: tamamen fonksiyonel, Donanım: devir hızı sonsuz değişken, dokümantasyon / kılavuz, talaş konveyörü, We offer you the following: Technical Data: Control: Heidenhain iTNC 530 HSCI Travel paths: - X-axis travel: 600 mm - Y-axis travel: 500 mm - Z-axis travel: 500 mm Main spindle: - Speed range: 20 – 18,000 rpm NC rotary table: - Table clamping surface: 600 x 500 mm - Load capacity: 400 kg - B-axis: -5° to +110° - C-axis: 360° Tool changer: - Tool interface: HSK-A63 - Number of tool positions: 210 Equipment and accessories: - Heat exchanger for spindle and table - Active cooler for control cabinet - Direct measuring system - Full enclosure - 3D control - DMG ERGOline Control - Direct measuring systems in the NC swivel rotary table including table cooling - Laser tool measurement BLUM NT - Calibration mandrel with tool holder - Infrared probe, Heidenhain TS 649 - Preparation for 3D quickSET - Hinged belt chip conveyor - ICS (internal coolant supply), 40 bar, 600 l tank, including rotating inspection window, sealing air, linear measuring systems, bed flushing - Rinsing gun - Mechanical oil and emulsion mist separator - Blow air through the spindle center - Operating mode 4 - Machine preparation for handling systems, consisting of: - Automatic, lateral loading door - Electrical interface for articulated-arm robot - Pneumatic control and monitoring of the zero-point clamping system - Enabling/disabling handling system via switch on machine control panel - Additional rinsing in the working area included - Machine preparation for job management included - Operator panel arrangement on the left included - Power supply to the machine table including 2-channel rotary union - Additional machine-side clamping hydraulics, 1 clamping circuit: - Clamping hydraulics 1 circuit, 30 – 240 bar, pressure adjustment via proportional valve technology - Includes extension of the rotary union to 4 channels Power-on hours: approx. 66,600 h Spindle hours: approx. 44,800 h Klsdsxgnz Tepfx Agdon The robot shown in the pictures is not included in the scope of delivery. The machine will be available approx. from Oct./Nov. 2025. The ball screws and linear guides on the X and Z axes have been replaced. Accessories, depicted tools and clamping devices are only included if specified in the additional information. Subject to technical changes, errors and prior sale!

Durumu: işlem için hazır (kullanılmış), Üretim yılı: 2014, Uzun palet taşıma özelliğine sahip bir DMG Mori CNC dikey işleme merkezi mevcuttur. 1) DMG Mori, üretim yılı: 2014, hareket X/Y/Z: 650 mm/520 mm/475 mm, hızlı hareket: 36 m/dak, hız: 14.000 dev/dak, mil gücü: 24 kW/16 kW, takım tutucu: HSK-A63, takım konumları: 30, masa boyutları X/Y: 900 mm/570 mm, makine boyutları X/Y/Z: yaklaşık 3900 mm/3400 mm/2600 mm, ağırlık: yaklaşık 6250 kg, kontrol: Heidenhain TNC 640, çalışma saati: 28.250 saat, mil saati: 13.116 saat. 2) Lang Eco Compact 20 palet otomasyon sistemi, üretim yılı: 2018, palet kapasitesi: 20, yükleme kolu erişimi: 1200 mm, X/Y ayak izi: 2000 mm/2000 mm. Kapıdaki döner tabla arızalı. Dokümantasyon mevcuttur. Yerinde inceleme mümkündür. Kedewpk Anopfx Agdoln

Durumu: kullanılmış, Üretim yılı: 2012, X ekseni hareket mesafesi: 600 mm, Y ekseni hareket mesafesi: 500 mm, Z ekseni hareket mesafesi: 500 mm, Travel: X / Y / Z = 600 / 500 / 500 mm NC rotary table 600 x 500 mm B-axis swivel range -5° to +110° C-axis 360° Load capacity 400 kg, direct measuring systems including table cooling Dynamics package: linear drives in X / Y axis Rapid traverse X / Y / Z: 80 m/min Acceleration X / Y / Z: 10 m/s² Active cooler for main spindle, linear drive, and table Control: Siemens 840D SL Operate Spindle: 20 - 24,000 rpm HSK-A63 according to DIN 69893 • Tool magazine: Chain-type magazine with 60 positions • Tool length measurement and breakage control Blum Z-Nano • Scraper belt chip conveyor with cleaned slotted screen, internal coolant supply (ICS), paper filter 40 bar 231 l/min, 600 l tank including rotating inspection window, linear system purge air, bed flushing • Blowing air through spindle center selectable via M-function, filtered air with low oil content • Electronic handwheel • Spray gun for chip rinsing • Enhanced chip flushing • Laminated safety glass windows for work area door and side panel • Operation mode 4 • High speed settings • Measuring probe Blum HSK-A63 Kledpfx Asyc Tthogdjn • Preparation for 3D QuickSet • Optional oil mist extractor • New spindle at 25,800 spindle hours

Durumu: kullanılmış, Üretim yılı: 2014, X-Ekseni hareketi: 600 mm Y-Ekseni hareketi: 500 mm Kjdpfxsycxino Agdoln Z-Ekseni hareketi: 500 mm Toplam güç ihtiyacı: --- kW Makine ağırlığı yaklaşık: 9,6 t Alan ihtiyacı yaklaşık: --- m DMG MORI DMU 60 EVO (2014) X - 600 mm Y - 500 mm Z - 500 mm Heidenhain iTNC530, TS649 probu ile İş mili devri: 14.000 dev/dak Takım magazini 60 adet / Takım tutucu HSK63 Bant filtre sistemi ile IKZ 40 BAR

Durumu: mükemmel (kullanılmış), Üretim yılı: 2018, makine/araç numarası: 172822052, Fonksiyonellik: tamamen fonksiyonel, ŞARTNAME Muylu tabla boyutu 600 mm çap X ekseni traversi 600 mm Y ekseni traversi 600 mm Z ekseni traversi 500mm A ekseni eğimi +120 derece/-120 derece C ekseni dönüşü 360 derece Kodpfx Agot Dmlfjdsln Maksimum masa yükü 600Kg İş Mili BT 40 Maksimum iş mili hızı 15.000 rpm İş mili motoru 22,4kW 1100rpm'de maksimum iş mili torku 239Nm İş mili motoru 35kW Hızlı ilerleme hızı X,Y,Z ekseni 36m/dak Hızlı ilerleme hızı C ekseni saniyede 540 derece (90 rpm Hızlı ilerleme hızı A ekseni saniyede 99 derece (16,6 rpm) Takım değiştirici kapasitesi 32 takım Yaklaşık ağırlık 9500kg MAKINE AŞAĞIDAKILERLE DONATILMIŞTIR: - Shop Mill ile Siemens 840DSL CNC kontrol sistemi İş mili soğutma sıvısı, 20 bar Talaş Konveyörü Lazer takım ayarı Traori-bu fonksiyon, 5 eksenli eşzamanlı işleme sırasında takımı iş parçasına göre optimize edilmiş bir kesme konumunda tutar Ağ İletişimi Aydınlatma Kapalı Koruma

Durumu: mükemmel (kullanılmış), Üretim yılı: 2017, Fonksiyonellik: tamamen fonksiyonel, toplam ağırlık: 10.000 kg, PREMIUMANNONS – DMG MORI DMU 60 eVo (2017) | 5-axlig | TNC 640 | 120 verktygsplatser | Automationsredo | 40 bar Översikt Här erbjuds ett högspecificerat DMG MORI DMU 60 eVo 5-axligt bearbetningscenter, tillverkat i Tyskland, med en kraftfull konfiguration för krävande produktion. Maskinen är förberedd för automation och passar utmärkt för obemannad drift samt framtida integrering av palett-/robotsystem. Viktiga fördelar • Årsmodell: 2017 • Styrsystem: Heidenhain TNC 640 (ERGOline®-styrning, 19” skärm) • 5-axligt NC-sväng-/rotationsbord (B-axel -5° till +110°, C-axel 360°) • 120-positions verktygsmagasin • Höghastighetsspindel upp till 18 000 rpm, SK40 BIG-PLUS • Automationsredo + utökad M65-gränssnitt • Geometriskt protokoll från DMG MORI tillgängligt Utrustning & tillval (maskinens utförande) Styrning / Programvara / Drift • Heidenhain TNC 640, ERGOline®-styrning, 19” display • Driftläge 4 – processövervakning under produktion • Elektroniskt handratt 5-axligt bord / Mätning • NC-sväng-/rotationsbord, 600 × 500 mm • B-axel -5° till +110°, C-axel 360° • Max belastning: 400 kg • Direktmätsystem (rotationsaxlar) • Renishaw OMP60 optisk IR-mätprobe Spindel / Verktyg / Magasin • Spindelgränssnitt: SK40 BIG-PLUS 18 000–20 000 rpm, 35 kW (40 % ED) / 25 kW (100 % ED) • Verktygsmagasin: 120 platser (kedjemagasin med dubbelgripare) • Verktygsbrottsdetektering TRS2 (kontaktlös – lämplig även för små diametrar) Kylning / Spånhantering / Kapsling • Invändig kylmedelstillförsel (IKZ) 40 bar (pappersbandfilter, tank 600 l) • Spåntransportör • Utökad spånsköljning (extra rengöring av arbetsområdet) • Spåntvättpistol • Spindelcentrerad luftblåsning (styrbar via M-funktion, konditionerad luft med låg oljehalt) • Roterande säkerhetsfönster (roterande observationsruta) • Olje- och emulsionsdimavskiljare (mekanisk) • Automationsförberedd • Utökad M65-gränssnitt Anslutning / Service • DMG MORI Messenger (installationskit för maskinuppkoppling) Klsdpfx Agjygky Teden • DMG MORI Netservice-klient (fjärrdiagnostik via extern PC)

Durumu: mükemmel (kullanılmış), Üretim yılı: 2012, Fonksiyonellik: tamamen fonksiyonel, X ekseni hareket mesafesi: 600 mm, Y ekseni hareket mesafesi: 500 mm, Z ekseni hareket mesafesi: 500 mm, hızlı travers X ekseni: 80 m/dak, hızlı tablası Y ekseni: 80 m/dak, hızlı ilerleme Z ekseni: 50 m/dak, kontrolör üreticisi: Heidenhain, kontrolör modeli: iTNC530, masa yükü: 400 kg, maksimum mil hızı: 24.000 dev/dak, iş mili çalışma saatleri: 17.917 h, takım magazinindeki yuva sayısı: 60, Donanım: devir hızı sonsuz değişken, Machine Description: - Universal 5-axis milling machine with linear drives in X and Y axes, rapid traverse speed of 80 m/min - Spindle and geometry in very good condition - Regularly serviced - Last spindle replacement: 08/2020 / New control panel installed: 09/2025 - Current operating hours: Machine ON: 58,985h / Spindle ON: 17,917h - Location: Lower Austria (near Vienna) Travel: X-axis (longitudinal): 600 mm Y-axis (cross): 500 mm Z-axis (vertical): 500 mm Clamping Table / Working Area: Integrated NC rotary table: 600 x 500 mm Table load capacity: 400 kg Control System: Heidenhain iTNC530 Spindle: Speed range: 24,000 rpm Tool interface: HSK63 Coolant System and Chip Disposal: External coolant with 3 nozzles: 4 bar Internal coolant: 40 bar Paper band filter Scraper-type chip conveyor Automatic Tool Changer: Tool interface: HSK63 Number of tool pockets: 60 Dimensions and Weight: Machine: Length 2,900 x Width 2,611 x Height 2,865 mm Weight: approx. 9,800 kg Additional Equipment and Accessories: - Heidenhain TS 649 probe - Heidenhain electronic handwheel - Blum laser for tool measurement on the table - Chip flushing gun Kjdeya U Ibepfx Agdsln - 3D Quick Set - ATC cycle package - Operating mode 4 - Integrated oil mist extraction - Operating manual / documentation - Dynamic package with linear drive 80m/min incl. active cooler

Durumu: yeni, – Yarı otomatik – Hidrolik – 2 hız – Çift açılı kesim – Kesme basıncı hidrolik olarak ayarlanabilir – Soğutma – Testere bıçağı 2730 x 27 x 0,9 mm – Ayak pedalı kontrolü Klsdpfx Agsh Razfedjn – Acil durdurma – Dokümantasyon – 400V

Durumu: mükemmel (kullanılmış), Üretim yılı: 2018, Tablo boyutu 600 x 500 mm çap, tablo yükü 400 kg, XYZ 600 x 500 x 500 mm hareket mesafesi, B ekseni -5/+110 derece, Klsdpfewnpzaex Agdsn C ekseni 0,001 derece Hızlı besleme hızları 80 m/dak, 120 istasyonlu takım değiştirici, mil konikliği HSK 63 mil hızı 20.000 dev/dak, Siemens 840D eRGOline kontrolü Talaş konveyörü. Mil Soğutma Sıvısı

Durumu: mükemmel (kullanılmış), Üretim yılı: 2013, Fonksiyonellik: tamamen fonksiyonel, X ekseni hareket mesafesi: 600 mm, Y ekseni hareket mesafesi: 500 mm, Z ekseni hareket mesafesi: 500 mm, DMG-Mori DMU 60 Evo Linear Control: Heidenhain ITNC 530 HSCI NC swivel rotary table: 600 mm x 500 mm B-axis swivel range: -5° to +110° C-axis: 360°, incl. table cooling Spindle speed: 20 - 24,000 rpm, HSK 63 A Tool magazine with 120 stations Infrared probe: Renishaw OMP 60 Dynamic package Laser tool measurement ICS with 40/80 bar and paper band filter (980 l), chip conveyor Electronic handwheel, 3D Quickset ATC, programmable coolant nozzles via M-function Kljdpexvhtnofx Agden Operating mode 4 Tropic package

Durumu: kullanılmış, Üretim yılı: 2009, x-travel: 1,800 mm y-travel: 700 mm z-travel: 700 mm Control: iTNC 530 Heidenhain Spindle speed range: 20 – 18,000 rpm Main spindle drive power: 25 / 35 kW Max. torque: 130 / 87 Nm Toolholder: HSK A63 DIN 69893 Tilting B-axis: +/- 100° Table clamping surface: 2,100 x 700 mm Max. table load: 1,500 kg Number of T-slots: 7 Table diameter: 750 mm Max. rotary table load: 500 kg Number of T-slots (rotary table): 7 Rotary C-axis: 360° Number of tool pockets: 30 Toolholder: HSK A63 DIN 69893 Max. tool weight: 6.0 kg Max. tool diameter: 80 mm Max. tool diameter with free adjacent slot: 130 mm Max. tool length: 300 mm Chip-to-chip tool change time: 7.6 sec Rapid traverse (X / Y / Z): 40 m/min Acceleration: 4 m/s² Max. feed rate: 40,000 mm/min Feed force (X / Y / Z): 8 kN Total power requirement: 70 kVA Machine weight: approx. 13.0 t Space requirement: approx. 7.0 x 6.2 x 2.8 m 5-axis CNC travelling column milling machine DECKEL MAHO - DMF 180 New Design - Swivelling milling head (B-axis) - Integrated rotary table - Internal coolant supply - Operating hours: Spindle run time: approx. 10,000 h Kljdsyhhtgjpfx Agdon

Durumu: mükemmel (kullanılmış), Üretim yılı: 2014, Fonksiyonellik: tamamen fonksiyonel, X ekseni hareket mesafesi: 600 mm, Y ekseni hareket mesafesi: 500 mm, Z ekseni hareket mesafesi: 500 mm, Donanım: devir hızı sonsuz değişken, talaş konveyörü, DMG-MORI DMU 60 EVO linear, 2014 model year Travel X/Y/Z: 600 mm x 500 mm x 500 mm Klsdpoxvhrwsfx Agdjn Motor spindle SK40 with 18,000 rpm NC swivel rotary table, B and C axes Tool magazine with 60 positions Heat exchanger for spindle and table Dynamic package Control unit: Siemens 840 D SL with Shop-Mill Infrared probe Heidenhain TS 649 Laser tool measurement Blum Scraper belt conveyor, high-pressure coolant with paper band filter and 80 bar Oil mist/emulsion separator Programmable coolant nozzles Electronic handwheel, Mode 4 Turning-milling cycle