Düşük yükleyici

Ebert TLS 55 ATV / Tele / 39,5to Nutzlast

Technical data for EBERT TLS 43 ATV Special Low Loader:

• Permissible fifth-wheel load: 19,000 kg
• Permissible axle load: 36,000 kg
• Gross vehicle weight: 55,000 kg
• Unladen weight according to DIN: approx. 15,500 kg
• Low-bed length (i.L.): approx. 6,650 mm + 4,000 mm
• Axle table length: 3,550 mm
• Overall width: 2,550 mm
• Loading edge/low-bed: approx. 200 mm / 350 mm
• Sliding table length: 500 mm
• Low-bed width extendable to: 3,050 mm
• Low-bed/telescopic extension: 4,000 mm
• B-dimension: 13,300 mm
• Complete vehicle flame-sprayed galvanized, with epoxy primer and 2K paint finish
• Oversize signage front and rear with red/white boards

Wheels:
• 13 x Michelin 245 / 70 R 17.5 X MULTI T VB 143J/146F

Steering:
• TRIDEC DLS with Tritronic

Axles:
• 12,000 kg – DLS independent wheel suspension, hydraulically steered and suspended

Front raised deck (high-bed):
• Drop sides 600 mm high
• Corners at the front of the raised deck angled
• Doors accessible from the outside in both front corners (left and right)
• Lockable storage box with lid behind the front wall, height 600 mm, width 2,480 mm, depth 7,500 mm
• Spare wheel on the front high-bed, behind the partition wall on the right
• Steps on the right side to access the front high-bed from the low-bed
• Hydraulic coupling for uncoupling on the left (6-fold Multi-Faster coupling)
• 6 lashing points, 3,000 kg rated, on the outside of the front high-bed (flush lashing rings)
• 2 lashing points, 5,000 kg rated, on top of the longitudinal members (to the rear)

Low-bed:
• Climbing aids on the boom – extendable
• Outer frame thickness: 8 mm
• Low-bed telescopic by 4,000 mm, lockable every 500 mm
• With sliding table, lockable every 250 mm
• 28 lashing points, 10,000 kg rated, on the outer frame
• 24 stake pockets 90 x 90 mm, evenly distributed, for low-bed widening to 3,050 mm
• 50 mm hardwood planks inserted between extension tubes, 10 mm overlap

Rear high-bed:
• Rear high-bed sloped forward and perforated, prepped for ramp mounting profiles (adapters, galvanized)
• At rear: ramp mounting profiles (Altec) – C rails
• 8 lashing points, 10,000 kg rated, on the outside of the rear high-bed
• 6 lashing points, 5,000 kg rated, in the excavator trough
• 10 lashing points, 5,000 kg rated, for oversize in the outer frame
• Excavator trough closure front and rear with plug-in wooden floor plate

Electrics:
• Use NATO coil, power supplied from tractor unit
• Rotating beacon centrally at rear
• Side marker lights in LED design
• Standard vertical tail lights (LC5)
• Work lights on high-bed for low-bed illumination
• Oversize signage front and rear, uncoupling control, safety sensor and pressure switch for suspension

Air:
• Aluminum air tank 80 l
• TEBS modulator
• Extension lock left and right (valve on the side at rear high-bed)
• Double release valve
Pedpfxsyfu N Ao Aa Aogg

Hydraulics:
• Hydraulic system on high-bed for steering, suspension, and detachable gooseneck

Accessories:
• 2x sets of 4 hardwood planks for low-bed extension support and intermediate table
• 2 securing wedges for uncoupling
• 4 wheel chocks

We are happy to provide leasing or financing offers upon request. Mr. Ebert (Tel.) will be happy to assist you. For more information, please visit our homepage. Subject to errors and prior sale.

Bu ilan otomatik olarak tercüme edildiğinden bazı çeviri hataları oluşmuş olabilir.