MMV 4200 hareketli kolon işleme merkezi

EMCO MMV 4200

MMV 4200 TRAVELLING COLUMN MACHINING CENTER
FOR 5-AXIS SIMULTANEOUS MACHINING
WITH HEIDENHAIN TNC 640
5-axis simultaneous travelling column machining center with integrated water-cooled motor spindle.
Control: HEIDENHAIN TNC 640
- Conversational programming
- USB and Ethernet interface
- 24" TFT color monitor
- 3D display, programming graphics
Spindle: Motor spindle, water-cooled
Spindle power: 46 kW
Spindle speed: 50 - 15,000 rpm
Spindle torque: 170 Nm
Tool interface: ISO 40 DIN 69871
Pull stud: ISO7388/2 Type B
Not included in the base version
Travel paths: X=4200 mm, Y=1000 mm, Z=950 mm
Distance spindle nose - table: 0-950 mm
Rapid traverse: X-Y-Z: 60/50/50 m/min
B/C axis: 50/100 rpm
Fixed table: Cast iron table with T-slots
Number - width - distance: 7-18-125
(Central alignment groove 18H8)
Clamping area: 4400 x 1050 mm
Maximum table load: 6000 kg
Kedpfxoychf Sj Acuowt
(evenly distributed)
Swivel head (B axis):
Torque motor, swivel range +120°/-120°
Rotary table (C axis): Torque motor
Table diameter 900 mm
Maximum table load: 2000 kg
Rotary table 0.05 mm +/-0.02 mm
Recessed under the fixed table
Stationary tool changer:
Drum magazine on the left side of the machine with 40 tools
Tool change time:
(Chip-to-chip VDI2852): approx. 15s
Coolant pump:
Pressure 6 bar, delivery rate 40 L/min
(nominal at the pump)
Work area lighting: 4 LED lamps
Standard equipment:
- Glass scales in the X/Y/Z axes
- Centralized lubrication with grease
- Handwheel
- Alarm lamp
- Work area lighting
- Electrical cabinet cooling unit

Bu ilan otomatik olarak tercüme edildiğinden bazı çeviri hataları oluşmuş olabilir.