Çalışma platformlu yarı römork

ES-GE 2-Achs-SAH, zwangsgelenkt, pneum. Heckausschub

You can find our entire inventory of immediately and short-term available vehicles on our website.

Excerpt from the equipment list. Full equipment details available on request.

Chassis:
* Welded construction made from high-grade steel profiles with through-profile crossmembers, designed for high point loads

Rear Extension:
* Pneumatically extendable loading platform, approx. 1,000 mm, including underride guard, locked every approx. 200 mm

Coupling Device:
* Fifth-wheel plate with 2-inch kingpin

Landing Legs:
* 2 x 12 t landing legs with compensation foot and single-sided operation on the right in the direction of travel

Axles:
* 2 x 10 t air suspension axle units, SAF brand, with disc brakes approx. 430 x 45 mm, centrally mounted wheel connection, ET 120
* ABS
* Total air suspension travel approx. 180 mm (lift approx. 110 mm, lower approx. 70 mm)
* Air suspension control via hand valve with stop function

Steering:
* Last axle forced-steered

Brake System: Wabco Brand
* Dual-line compressed air brake system according to EC regulations with EBS and RSS, automatic load-dependent control
* Spring-actuated cylinder as parking brake
* Fixed coupling heads at the front cross-member with twist protection, no connection line to the towing vehicle

Tyres:
* 4x 385/65 R22.5 164K, fitted on 11.75 x 22.5 rims, ET 120 – brand at our discretion

Mudguards:
* According to EC, 1/4 PVC mudguards in front of and behind each axle unit

Spare Wheel Holder:
* 1 double basket with mounting kit for one spare wheel with ET 120
Crodpfxewx Ddds Abveh

Load Securing:
* 8 pairs of foldable lashing rings, evenly distributed (pulling force approx. 8.0 t)
* 7 pairs of foldable lashing rings, evenly distributed (pulling force approx. 2.5 t)
* Holes for lashing straps approx. every 500 mm in the outer frame

Stake Pockets:
* 8 pairs of stake pockets in the outer frame, evenly distributed
* 4 rows of stake pockets across the loading platform

Drop-in Stakes:
* 20 stakes made of galvanized pipe, approx. 80/50 mm, total length approx. 1,000 mm
* Magazine for 20 stakes mounted on the inside of the front wall

Front Wall:
* Bolted corner uprights filled with aluminum hollow sections, interior lined with approx. 9 mm phenolic plywood (approx. 1,250 mm high)

Floor:
* Approx. 28 mm Z-hardwood floor recessed into the outer frame

Lighting System:
* According to EC: 24-volt system with multi-chamber lights
* LED side marker lamps
* LED position lights, front white
* LED outline marker lamps at the rear
* License plate lights
* 1 x 15-pin and 2 x 7-pin connectors at the front cross-member

Equipment:
* Warning panel according to ECE 70
* Work lamp on the lamp bracket (activated via reverse gear)
* Bracket for revolving beacon at the rear, incl. beacon
* 2 x PVC toolboxes

Painting:
* Chassis and front wall sandblasted and finished with premium single-color coating
* Single-color finish in RAL color of your choice

Conspicuity Markings:
* According to EC, yellow on sides and rear (with ESGE logo)

Bu ilan otomatik olarak tercüme edildiğinden bazı çeviri hataları oluşmuş olabilir.