Çalışma platformlu yarı römork

ES-GE 3-Achs Sattelanhänger -Bordwände

Durumu: yeni, toplam ağırlık: 43.000 kg, dingil konfigürasyonu: 3 dingil, Donanım: ABS, Our complete vehicle inventory, featuring vehicles available for immediate and short-term delivery, can be found on our website. Excerpt from the equipment specification. Complete equipment details available on request. Chassis: * Welded construction made of high-quality steel profiles with through-type cross-members, designed for high point load * Underride nose, approx. 700 mm wide * Outer frame as UNP profile * Wear plate approx. 8 mm * Fifth wheel height at front approx. 130 mm Towing Equipment * 2" kingpin Underrun Protection * Bolted version, compliant with EC standards Side Protection * EC compliant, made of anodized aluminum profiles Dcsdsw U H Sbepfx Abvon Landing Legs * 2 x 12 t landing legs with compensation foot and single-side operation on the right in direction of travel Axles * 3 x 9 t air suspension axle units, disc brakes 22.5" * Total lift approx. 180 mm * Lifting and lowering system via rotary slide valve Brake System * Dual-line compressed air brake system according to EC, with EBS and RSS, automatic load-dependent control * Spring-actuated cylinders as parking brake * Reversal-proof coupling heads permanently mounted on front beam, without connecting line to tractor unit Tyres * 6-off, 385/55 R22.5 160J on 11.75x22.5 ET 120 steel rims, manufacturer of our choice * Tyre pressure monitoring (TPMS) via EBS CAN-bus system Fenders * EC compliant Spare Wheel Carrier Not included Load Securing * 9 pairs of foldable lashing rings, evenly distributed, tensile strength approx. 5.0 t * 9 pairs of foldable lashing rings, evenly distributed, tensile strength approx. 2.0 t * Outer frame with boreholes approx. every 400–600 mm for inserting tension belts Front Wall * Reinforced steel construction, fixed, approx. 1,400 mm high * Interior lined with approx. 9 mm phenolic plywood (approx. 1,250 mm high) Floor * Approx. 28 mm Z-hardwood floor recessed in outer frame with galvanized omega steel profiles Lighting System * EC compliant, 24 V, with multi-chamber lights * LED side marker lights * LED position lights, white, front * LED outline lights, rear * License plate lights * Lane marker LED lights * 1x15- and 2x7-pin socket connectors on front beam Equipment * 2 wheel chocks with holder * ECE 70 warning panels * Bracket for rotating beacon, incl. beacon * 2 rubber dock buffers at the rear * Rear right foldable and extendable access ladder (no platform) * 1 open box made of perforated sheet metal, transverse to the direction of travel, approx. 600 x 450 x 2,430 mm, galvanized, behind axles Paintwork * Front wall: RAL single colour of choice * Chassis: hot-dip galvanized * Outer frame: hot-dip galvanized + RAL single colour of choice * Central stanchions: RAL single colour of choice * Side guard system: aluminium anodized * Underrun protection: white (RAL 9016 traffic white) * Add-on parts: galvanized/KTL black * Rims: silver Conspicuity Marking * Fully yellow Including Special Accessories * First axle liftable, with fully automatic, load-dependent lifting control * 10 pairs of stanchion pockets in the outer frame, evenly distributed * 4 rows of stanchion pockets transverse to the loading area * 20 pieces of stanchions made of galvanized tube 80/50, total length approx. 1,200 mm * Magazine for 20 insertable stanchions on inside of front wall * 5 x 25 side panels and rear panel made of anodized aluminum hollow profiles, foldable and removable * Removable Kinnegrip stanchions * Side panel and stanchion magazine: under-chassis left and right i

Durumu: yeni, toplam ağırlık: 39.000 kg, azami yük ağırlığı: 32.340 kg, dingil konfigürasyonu: 3 dingil, toplam genişlik: 2.550 mm, Donanım: ABS, You can find our complete inventory of immediately and short-term available vehicles on our website. Excerpt from the equipment. Full specifications available on request. Chassis: * Welded construction made from high-quality steel profiles with through-profile cross members, designed for high point loads Kingpin Coupling: * 2-inch kingpin Landing Legs: * 2 x 12 t landing legs, compensating foot, single-sided operation (on front right) Axles: * 3 x 9 t air suspension axle units * Disc brakes * Manufacturer SAF, with disc brake approx. 430 x 45 mm * ABS * Hub-centric wheel connection, 10-bolt with ET 120 * Total air suspension travel approx. 200 mm (lift approx. 140 mm, lower approx. 60 mm), control via rotary slide valve with locking function Braking System: * Two-line pneumatic brake system as per EU regulation with EBS and RSS, automatic load-dependent control * Spring-loaded cylinders as parking brake * Error-proofed coupling heads securely mounted on the front crossbar, no connecting line to the truck Tyres: * 6 units, 385/55 R22.5 160J on steel rims 11.75 x 22.5 ET 120, manufacturer of our choice Mudguards: * According to EU regulation, PVC mudguards front and rear of axle assembly Spare Wheel Carrier: * 1 double basket with mounting material for one spare wheel with ET 120 Load Securing: * 9 pairs of folding lashing rings, evenly distributed, tensile force approx. 8.0 t * 8 pairs of folding lashing rings, evenly distributed, tensile force approx. 2.5 t * Along the outer frame approx. every 500 mm a bore hole for tie-down straps Front Wall: * Reinforced steel construction, fixed * Interior covered with approx. 9 mm coated plywood (approx. 1,250 mm high) Floor: * Approx. 28 mm Z-hardwood floor recessed into outer frame Lighting System: * According to EU regulation, 24 volt, with multi-chamber lights * LED side marker lamps * LED front position lamps (white) * LED rear outline marker lamps Dcjdewx Db Ajpfx Abvon * License plate lights * 1 x 15-pin and 2 x 7-pin sockets on the front crossbar Equipment: * ECE 70 warning panel * Holder for rotating beacon (without beacon) Paintwork: * Chassis and front wall sandblasted, primed and painted in single colour * Chassis: RAL 3002 Carmine Red * Drop sides: Anodised * Sideboard stanchions: RAL 3002 Carmine Red * SSV: aluminium anodised * Hubs: KTL coated * Underrun protection: white (RAL 9010) * Attachments: galvanised/KTL black * Rims: silver Accessories: * First axle liftable, with fully automatic load-dependent lift control * 10 pairs of stanchion pockets in the outer frame, evenly distributed * 4 rows of stanchion pockets across the loading area * 20 stanchions made from galvanised tubing 80/50, total length approx. 1,000 mm * Internal magazine on front wall for 20 plug-in stanchions * Side walls: 5 x 25 side walls and rear wall made from anodised aluminium hollow profiles, foldable and removable, removable Kinnegrip stanchions * Side wall and stanchion magazine: insertion rails for sideboards and stanchions under the chassis left and right * Container locks for 1 x 40’ and 2 x 20’ containers flush with rear, container locks for 1 x 20’ container at centre position * Work light on lamp bracket * 2 stainless steel toolboxes, approx. 600 x 500 x 500 mm * Air suspension Safety: ABS * EBS * Disc brakes Extras: Rental possible