Çalışma platformlu yarı römork

ES-GE 5-Achs-Ballastauflieger

You can find our complete inventory of immediately and short-term available vehicles on our website.

Excerpt from the specifications. Complete equipment details available on request.

Chassis:
* Welded construction made of high-grade steel profiles with through cross-members, designed for high point loads
* Outer frame made of UNP steel

Coupling System / Fifth Wheel Load:
* 2-inch kingpin
* Technically permitted fifth wheel load: 26,500 kg

Underride Guard:
* In accordance with EU regulations, bolted version

Side Guard:
* In accordance with EU regulations

Landing Legs:
* Landing legs with single-sided operation, support load approx. 66 t / lifting capacity approx. 24 t

Axles:
* 5 x 10 t air suspension axle assembly, SAF brand, with drum brake approx. 400 x 200 mm
* ABS
Hedpfjwx Dcaox Ac Hsfn
* Hub-centered wheel connection, 10-hole with ET 0
* Total air suspension lift approx. 200 mm, lifting approx. 140 mm, lowering approx. 60 mm, operated via rotary valve with latch function

Steering:
* First axle self-steering, second axle fixed, third, fourth, and fifth axle with mechanical forced steering (Tridec)
* Lubrication points routed centrally to the outside

Axle Lift:
* First and second axle automatically liftable, with additional manual switching on the chassis

Brake System:
* Two-line compressed air brake system according to EU regulations with EBS and RSS, automatic load-dependent control, Wabco brand 4S/3M
* Spring-type cylinders as parking brake
* Reverse-polarity protected coupling heads, securely mounted on the front cross member, without connection line to the tractor unit
* Aluminum air reservoir

Tyres:
* 10x 445/65 R22.5 164J on 11.75 x 22.5 ET 0 rims – make of our choice

TPMS:
* Tire pressure monitoring system
* TPMS according to ECE R141, with data transfer to tractor unit

Mudguards:
* According to EU regulations, first axle front, second axle rear, third, fourth, and fifth axle each with 1/4 PVC mudguard at front and rear
* Rear mudguards with spray flaps

Load Securing:
* 5 pairs of folding lashing rings, evenly distributed (traction approx. 14 t)
* 11 pairs of welded lashing plates in the outer frame (traction approx. 3 t)
* 10 pairs of lashing rings on the side of the outer frame, evenly distributed (traction approx. 8 t)

Stake Pockets:
* 10 pairs of stake pockets recessed in the outer frame
* 6 pairs of stake pockets recessed into the floor (at the outer longitudinal member)

Drop-in Stakes:
* 16 galvanized drop-in stakes, approx. 80 x 80 x 8 mm, usable length approx. 850 mm

Stake Magazine:
* Magazine for 8 drop-in stakes (80/80 mm) per side, in front of the front wall

Front Wall:
* Bolted corner posts filled with aluminum hollow profiles, interior fitted with a steel impact plate across the entire width and height

Floor:
* Approx. 28 mm Z-hardwood floor, recessed flush into the outer frame

Lighting System:
* In accordance with EU regulations, 24 Volt with multi-chamber lights
* LED side marker lamps
* LED front position lamps (white)
* LED rear outline marker lamps
* License plate lights
* 1x15 and 2x7-pin socket on front cross member

Equipment:
* Two wheel chocks with holders
* Warning sign according to ECE 70
* Work light on lamp bracket (switched via reverse gear)
* Bracket for revolving beacon at rear (incl. beacon)
* 1 fixed access ladder on each side, incl. plug-in climbing aid
* Smart board
* Vehicle swing-out warning stickers
* Load center of gravity indication stickers

Paintwork:
* Chassis and front wall sandblasted a

Bu ilan otomatik olarak tercüme edildiğinden bazı çeviri hataları oluşmuş olabilir.