Çalışma platformlu römork

ES-GE Tandemanhänger - Rungen - CV

You can find our complete range of vehicles, including those available immediately or at short notice, on our website.

Excerpt from the equipment specifications. Full specifications available upon request.

Chassis:
* Steel welded construction made from welded longitudinal beams and inserted Z-crossmembers, closely spaced crossmembers for high floor load capacity
* Ramp storage: Two insertion pockets for each one loading ramp located between the longitudinal beams behind the axle assembly below the loading floor, with cover plate in the rear end frame

Underrun protection:
* According to EU regulations

Landing legs:
* Front: Landing legs operable from one side
* Rear support: Two adjustable drop-down legs

Axles:
* 2 x 10 t air suspension axle assembly, SAF brand, drum brakes approx. 300 x 200 mm, center-location for twin tyres, ABS, total air suspension travel approx. 200 mm (comprising approx. 140 mm lift and 60 mm lowering), control via lever with detent function

Tyres:
* 8-fold, 235/75 R17.5 – make at our discretion, mounted on 6.75x17.5 rims with offset

Mudguards:
* PVC, fitted in front of and behind the axles according to EU specifications

Load securing:
* Perimeter frame with tie-down points approx. every 150 mm for lashing straps, tensile strength approx. 2.5 t
* 6 pairs of foldable lashing rings evenly distributed, tensile strength approx. 8 t each
* Stake pockets for removable stakes 80/50: 3 pairs of stake pockets in the outer frame, evenly distributed

Braking system:
* Pneumatic braking system in accordance with EU requirements with EBS
* Two spirals for connection to the tractor unit, with red/yellow coupling heads
* Spring-loaded parking brake acting on one axle

Floor:
* Approx. 28 mm Z-hardwood floor recessed in the outer frame

Lighting:
* Lighting system according to EU standard, 24 Volt, multi-chamber tail lights, license plate lights, side marker lights and lane marker lights at the rear, connector plate on the left at the towing bar, incl. connection cable with 15-pin and 2 x 7-pin plugs

Accessories:
* 2 wheel chocks with brackets
* Detachable rotating beacon at the rear
* 40 mm towing device supplied (max. GVW 13,500 kg)
* Rear extension approx. 800 mm incl. underrun protection, extendable loading platform, load capacity approx. 2 t, locking at approx. every 200 mm
* Mechanically adjustable fixed drawbar, 6 x approx. 100 mm increments, with bolted 50 mm towing eye according to DIN 74053
* 4 rows of stake pockets across the loading area, evenly distributed
* 12 galvanized pipe removable stakes, approx. 80/50/4 mm, approx. 1,000 mm long
* Container locks for 1 x 20' container
* Extendable container locks for 1 x 20', extendable to approx. 2,820 mm, according to ISO 1496, EN 284, or EN 452
* 1 pair of aluminum loading ramps, load capacity per pair approx. 9,000 kg
* 4 stainless steel toolboxes between or behind the axles

Paintwork:
* Chassis shot-blasted, cleaned, and hot-dip galvanized to the latest industry standards
* Superstructure parts cleaned, primed, and hot-dip galvanized
* Chassis: Hot-dip galvanized + RAL 9011 graphite black
* Outer frame: Hot-dip galvanized + RAL 9010 pure white
* Hubs: KTL black
* Underrun protection: RAL 9010 pure white
* Rims: RAL 9006 silver
Hfsdpfey Auf Tox Ag Hof
* Mounted parts: galvanized / KTL black

Bu ilan otomatik olarak tercüme edildiğinden bazı çeviri hataları oluşmuş olabilir.