Alçak şasi dorse

FAYMONVILLE Gigamax Tiefbett 1+3

EQUIPMENT EXCERPT

GOOSENECK
Gooseneck with integrated single-axle running gear (pendle axle), detachable version. Gooseneck hydraulically liftable and lowerable, including hydraulic connection linked to the hydraulic axle compensation of the first axles. Length: approx. 5,200 mm, with approximately 60° tapered front end.

Fifth-wheel load according to datasheet: W25-DSR2700-12/22.7
For tractor units: 6 x 4 or 8 x 4

- Removable steel front wall, approx. 400 mm high, tapered design.
- 1 pair of mechanical supports at the front of the gooseneck.
- ASPÖCK-UNIBOX at the connection strip at the front with 24N, 24S & 15-pin sockets.
- 1 spare wheel holder inside on the front wall of the gooseneck with winch.
- 2 pairs of recessed lashing rings on the gooseneck (LC 2,500 daN).
- 2 pairs of recessed, outward-folding lashing rings on the outer frame of the front running gear (LC 10,000 daN).
- 1 pair of lashing rings at the transition from the running gear to the loading platform (LC 10,600 daN).
- On the gooseneck: 1 pair of removable aluminum side boards, approx. 400 mm high, anodized finish.
- On the gooseneck: 1 removable aluminum rear wall, approx. 400 mm high, anodized finish.
- 3.5 inch king pin
- TPMS tire pressure monitoring system in accordance with ECE R 141.
- Round NATO socket at the front connection strip (Maeler & Kaege VG 96 917)
- 1 stainless steel toolbox with one lid, mounted on top of the gooseneck on the right side in the direction of travel near the ALU side board, approx. 1,350 x 400 x 400 mm (L x W x H).

LOADING PLATFORM
Low bed with exterior beams, designed as a telescopic loading platform in low-profile construction with extension at the front including a fixed approx. 50 mm hardwood floor.
Dimensions: approx. 8,000 mm x 2,740 mm (L x W).

- Mechanical pin-tab coupling between low bed and running gear for swapping out the loading platform or installing extension beams.
Csdpjyhkqnefx Afmogn
- One locking position approx. every 500 mm on the extension.
- 4 pairs of recessed lashing rings laid flat in the loading platform, arranged along the outer frame/external beams (LC 10,000 daN).
- 1 lashing ring on each left and right side of the rear cross member (LC 10,000 daN)
- Foldable extensions, approx. 230 mm on each side (WITHOUT wooden planks)
- Loose extension planks, edged in steel.
- Preparation for mounting bolt-on container locating devices for 1 x 20' or 1 x 40' container on the external beams. Without container locks.
- 6 pairs of threaded blocks between the lashing rings below the top chord on the outer beam for installing bolted rings M24 (LC 8,000 daN).
2 pairs of bolted rings M24 (LC 8,000 daN) included.

REAR RUNNING GEAR
Rear running gear with closed outer frame, checker plate surface, and continuous prism excavator recess, approx. 1,450 x 900 x 505 mm, open at the rear.
PENDLE AXLES, all axles hydro-mechanically forced-steered.
Hose rupture valve on the axle compensation cylinder with automatic reset function.
Hydraulic cylinders with shut-off valves and pre-fittings to secure in raised position.
Final coating of axles in DB 7350 Novagrau, single color, 2 layers of 2-component paint.
Technical axle load: 12,000 kg each
Hydraulic axle compensation.

- 245/70 R17.5 3PMSF. Make at our discretion.
- Remote rear-axle steering control via cable remote, with individual axle tracking check, without installation in the tractor unit.
- 4 pairs of hanging lashing rings on the outer frame of the rear running gear (LC 10,000 daN).
- 1 pair o

Bu ilan otomatik olarak tercüme edildiğinden bazı çeviri hataları oluşmuş olabilir.