Alçak şasi dorse

FAYMONVILLE

Durumu: kullanılmış, azami yük ağırlığı: 36.216 kg, toplam ağırlık: 49.500 kg, dingil konfigürasyonu: 3 dingil, ilk tescil: 10/2024, bir sonraki muayene (TÜV): 10/2026, yükleme alanı uzunluğu: 13.100 mm, yükleme alanı genişliği: 2.480 mm, yükleme alanı yüksekliği: 3.100 mm, toplam genişlik: 2.550 mm, toplam yükseklik: 4.000 mm, Üretim yılı: 2024, Donanım: ABS, FAYMONVILLE MAX100 3-axle SANH semi low-loader forklift transport trailer First registration: 10/2024 Unladen weight approx. 13,200 kg Fifth wheel height: 1,150 mm Low-bed length: 9,300 mm Gooseneck length: 3,800 mm Gjdpfx Aex Nlhrea Ejip Internal width: 2,480 mm Load height in the low-bed: 860 mm Height-adjustable tarpaulin superstructure, adjustable by approx. 400 mm EDSCHA sliding roof, movable forward The structure can be hydraulically widened at the rear portal by approx. 750 mm Loading area behind the gooseneck hydraulically raisable and lowerable, length approx. 2,800 mm; gooseneck and low-bed with grating flooring, over the axles: checker plate flooring with integrated sand coating Two-part steel ramps, approx. 3,185 + 1,420 mm, width 1,250 mm each, also with grating surface, max. load capacity 30,000 kg Tyres: 13 x 235/75 R 17.5 BPW axles with drum brakes 1st axle: LIFT AXLE 3rd axle: STEERABLE TRAILING AXLE Air suspension with raising/lowering function WABCO trailer EBS 24-volt E-hydraulics RENTING is the new BUYING – immediately available from us with full-service rental as well.

Durumu: kullanılmış, Üretim yılı: 2012, Yük kapasitesi: 28.200 kg dar ağırlık: 11.800 kg Genel durum: ortalama Teknik durum: ortalama Görsel durum: ortalama Üretim ülkesi: BE Daha fazla bilgi için Christian Theißen ile iletişime geçin. Gsdpfxsyt Ikcs Aa Ejip Üretici: Faymonville Model: Multimax STN-4UBX Üretim yılı: 2012 Ürün tipi: İkinci el Veriler: İlk tescil: 27.02.2012 Toplam ölçüler UxGxY: 13,65 x 2,55 x 4 m Boş ağırlık: 11.800 kg Azami toplam ağırlık: 40.000 kg Taşıma kapasitesi: 28.200 kg Dingil sayısı: 4 Özel özellikler: Zorunlu yönlendirmeli takip aksı, kuğu boynu için hidrolik kaldırma yatağı Not: Konum: Essen Hemen teslim.

Durumu: iyi (kullanılmış), Üretim yılı: 2013, Yük kapasitesi: 42.000 kg Azami yüklü ağırlık: 10.900 kg Teknik durumu: iyi Görsel durumu: iyi Dış boyutlar: 13,5 x 2,55 x 4 m Daha fazla bilgi için Christian Theißen ile iletişime geçiniz. Üretici: Faymonville Tip: Euromax Üretim yılı: 2013 Ürün tipi: İkinci el Veriler: İlk tescil: 17.04.2013 Toplam ölçüler UxGxY: 13,50 x 2,55 x 4 m İzin verilen toplam ağırlık: 42.000 kg Boş ağırlık: 10.900 kg Lokasyon: Essen Gedoyt Ii Espfx Aa Esip Hemen teslim

Durumu: iyi (kullanılmış), Üretim yılı: 2013, Yük kapasitesi: 42.000 kg Azami toplam ağırlık: 10.900 kg Teknik durumu: iyi Görsel durumu: iyi Dış ölçüler: 13,5x2,55x4 Daha fazla bilgi için Christian Theißen ile iletişime geçin. Üretici: Faymonville Tip: Euromax Üretim yılı: 2013 Ürün türü: İkinci el Veriler: İlk tescil: 13.06.2013 Gisdpeyt Iixefx Aa Eop Toplam boyutlar UxGxY: 13,50 x 2,55 x 4 m İzin verilen toplam ağırlık: 42.000 kg Boş ağırlık: 10.900 kg Konum: Essen Hemen teslim

Durumu: mükemmel (kullanılmış), dingil konfigürasyonu: 3 aks, yükleme alanı uzunluğu: 17.320 mm, yükleme alanı genişliği: 3.200 mm, yükleme alanı yüksekliği: 400 mm, toplam uzunluk: 17.320 mm, toplam genişlik: 3.200 mm, süspansiyon: hidrolik, lastik boyutu: 245/70 R 17.5 | 143/131L (146/146F), renk: beż, Üretim yılı: 2021, Colour: Yellow Loading capacity: 64,800 kg Main Features Manufacturer: Faymonville Model: GigaMax 1+4 / F-S45-2GXX Chassis Number: YAFTL1009M0027562 Year of Manufacture: 2021 Weights/Loading Capacity King-pin load: 25,000 kg Axle load: 12,000 kg Total axle load: 12,000 kg x 5 = 60,000 kg Gross vehicle weight (GVW): 84,200 kg Unladen weight: 20,200 kg Payload capacity: 64,800 kg Axles Pendle axles Hydraulic suspension All axles with hydraulic steering WABCO braking system with EBS-E Tyres: 245/70 R 17.5 | 143/131L (146/146F) Dimensions Overall length: 17,320 mm Loading platform length: 6,800 mm 2x extension beams: 2,000 mm / 3,000 mm Loading platform width: 2,750 mm / 3,200 mm Loading platform height: 400 mm Ground clearance: 150 mm King-pin height: +/- 1,340 mm Additional information: Gooseneck with integrated 1-axle pendle axle Hatz diesel powerpack Hydraulically operated gooseneck Aluminium side boards on gooseneck 2x extension beams: 2,000 mm / 3,000 mm Excavator trough Lashing rings Stainless steel toolbox Spare wheel + holder Rear under-run protection with lighting Godpfxovzaans Aa Eoip King-pin 3.5" Central greasing system with 2 BEKAMAX pumps = Further Information = General Information Year of manufacture: 2021 Axle Configuration Tyre size: 245/70 R 17.5 | 143/131L (146/146F) Suspension: hydraulic suspension Front axle: twin tyres; lift axle; max. axle load: 12,000 kg; steering axles Rear axle 1: twin tyres; lift axle; max. axle load: 12,000 kg; steering axles Rear axle 2: twin tyres; lift axle; max. axle load: 12,000 kg; steering axles Rear axle 3: twin tyres; lift axle; max. axle load: 12,000 kg; steering axles Rear axle 4: twin tyres; lift axle; max. axle load: 12,000 kg; steering axles Weights Unladen weight: 20,200 kg Payload: 64,800 kg Gross vehicle weight: 85,000 kg Functional Platform height: 40 cm Extendable structure: Yes Condition Technical condition: very good Visual condition: very good Financial Information Price: On request Additional information Please contact Stefan Schaapveld for further information.

Durumu: mükemmel (kullanılmış), ilk tescil: 01/2014, toplam uzunluk: 126.500 mm, toplam genişlik: 2.550 mm, toplam yükseklik: 1.600 mm, renk: turuncu, Üretim yılı: 2014, Boş ağırlık: 12.200 kg Yük kapasitesi: 65.800 kg toplam ağırlık: 78.000 kg Teknik durum: çok iyi Görsel durum: çok iyi FAYMONVILLE SPNZ-5 BALAST SEMİ RÖMORK BPW dingiller 3. ve 5. aks hidrolik olarak yönlendirilebilir Giedeyucblspfx Aa Esp Uzaktan kumanda WABCO Smart Board Yedek lastik tutucu Alet kutusu 40 x zemin ankrajı 9 x takılıp çıkarılabilir dikme Bizi Instagram'da takip edin: GeurtsTrucks Almanca konuşuyoruz İngilizce konuşuyoruz İspanyolca konuşuyoruz

Durumu: mükemmel (kullanılmış), dingil konfigürasyonu: 3 aks, yükleme alanı uzunluğu: 13.600 mm, yükleme alanı genişliği: 2.540 mm, yükleme alanı yüksekliği: 1.550 mm, toplam uzunluk: 13.600 mm, toplam genişlik: 2.540 mm, toplam yükseklik: 1.550 mm, süspansiyon: hava, lastik boyutu: 275 / 70 R22.5 – Good Year, renk: kırmızı, Üretim yılı: 2024, Color: Red Payload Capacity: 60,800 kg Extendable Main Features Manufacturer: Faymonville Type: F-S44-1BBY Triple Extendable Flat Bed Chassis number: YAFSR4009S0036724 Year: NEW / Unused Weights / Payload Capacity King-pin load: 28,000 kg Axle load: 12,000 kg Total axle load: 48,000 kg GVW: 76,000 kg Unladen weight: 15,200 kg Payload capacity: 60,800 kg Axles Axle brand: BPW Air suspension All axles with hydraulic steering WABCO braking system with EBS Tyres: 275 / 70 R22.5 – Goodyear Load index: 148/145M Dimensions Length: 13,600 mm Extensions: 7,200 mm + 7,400 mm + 7,600 mm Maximum extended length: 35,800 mm Loading floor width: 2,540 mm Height: 1,550 mm (+/- 100 mm) Additional Information High-resistance metallization of steel construction NATO plug Lashing rings Stake pockets Wooden loading floor Gjdpfx Ajv I Dqqja Esip Mechanical landing gear Electrohydraulic pump for trailer functions Spare wheel Rear bumper with lights King-pin 2.0” + 3.5″ Central greasing with 2 BEKAMAX pumps = Further Information = General Information Year of manufacture: 2024 Axle configuration Tyre size: 275 / 70 R22.5 – Goodyear Axle brand: BPW Suspension: Air suspension Rear axle 1: Twin tyres; Max axle load: 12,000 kg; Steered; Tyre tread depth, left inside: 100%; Tyre tread depth, left outside: 100%; Tyre tread depth, right inside: 100%; Tyre tread depth, right outside: 100% Rear axle 2: Twin tyres; Max axle load: 12,000 kg; Steered; Tyre tread depth, left inside: 100%; Tyre tread depth, left outside: 100%; Tyre tread depth, right inside: 100%; Tyre tread depth, right outside: 100% Rear axle 3: Twin tyres; Max axle load: 12,000 kg; Steered; Tyre tread depth, left inside: 100%; Tyre tread depth, left outside: 100%; Tyre tread depth, right inside: 100%; Tyre tread depth, right outside: 100% Rear axle 4: Twin tyres; Max axle load: 12,000 kg; Steered; Tyre tread depth, left inside: 100%; Tyre tread depth, left outside: 100%; Tyre tread depth, right inside: 100%; Tyre tread depth, right outside: 100% Weights Unladen weight: 15,200 kg Payload: 60,800 kg GVW: 76,000 kg Functionality Loading platform height: 155 cm Extendable body: Yes Condition Technical condition: Very good Visual condition: Very good Further information Please contact Stefan Schaapveld for more information.

Durumu: yeni, toplam ağırlık: 80.000 kg, dingil konfigürasyonu: 3 aks, toplam genişlik: 2.540 mm, Donanım: ABS, Additional vehicles available – extract from equipment list. Full equipment details upon request. GOOSENECK: * Gooseneck in SNT design to optimize loading platform length, approx. 3,700 mm long, rear with chamfer approx. 1,000 mm x 10° * For tractor units: 4 x 2, 6 x 2, and 6 x 4 * Steel front wall, detachable, approx. 400 mm high * ASPÖCK-UNIBOX on the front control panel with 24N, 24S & 15-pin sockets * 3 kW electric-hydraulic power pack for controlling hydraulic functions, excluding hydraulic winches * Outer beams of the gooseneck with mounting holes for bolted lashing rings: first hole approx. 200 mm from the front, then every approx. 400 mm; 2 pairs of screw-in lashing rings included (LC 5,000 daN) * 1 pair of horizontal lashing rings in the rear of the gooseneck (LC 10,000 daN) * On the gooseneck, 1 pair of plug-in ALU sideboards, approx. 400 mm high, anodized finish * On the gooseneck, 1 plug-in ALU rear board, approx. 400 mm high, anodized finish * Approx. 40 mm thick hardwood flooring over the gooseneck, over king pin checker plate covering * 3.5 inch king pin * Gooseneck guide plate for the fifth wheel plate, approx. 500 mm wide * Round NATO plug socket on the front control panel (Maeler & Kaege VG 96 917) * 2 pairs of lashing rings with retaining spring suspended on the outer beams of the gooseneck (LC 5,000 daN) LOADING PLATFORM: * Extendable loading platform, approx. 8,800 mm long with rear chamfer approx. 500 mm x 10° * Pneumatic locking with conical locking pin and reinforced locking positions; supply lines are protected within the extendable beams and automatically adapt to the platform length * BPW axles and suspension, 1st axle with steering, all other axles hydro-mechanically forced steering * 1st axle with electro-magnetic reverse lock via reverse gear and manual activation * Technical axle load: 12,000 kg each * Air suspension with lift and lower valve * 235/75 R 17.5 3PMSF twin tyres – brand at our discretion * Mechanical landing legs with 2-speed gearbox and crank. JOST Modul B – static test load = 50,000 kg * On the platform, continuous and between axles interrupted approx. 50 mm thick hardwood flooring (thereby increasing the coefficient of friction). – Slotted holes for hook-in and repositionable bridging elements * At front of platform – 1 adjustable intermediate table, approx. 300 mm wide, for the extension tube with large cross-section, with checker plate covering. – Front and rear with slotted holes for hook-in and repositionable bridging elements Giedpfx Aexarmaoa Eep * 1 pair of lashing rings on the front cross member (LC 10,000 daN) * 7 pairs of recessed, fold-out lashing rings in the outer frame of the platform (LC 10,000 daN) * Extensions (galvanized) extendable by approx. 230 mm on each side (without wooden planks) * 1 pair of mechanical rear supports * Remote steering from front and rear via cable remote control, with axle tracking control, no installation in tractor unit * TPMS tire pressure monitoring sensors installed in all wheels * Platform locking with conically welded locking profiles every 500 mm * Locking control left and right on the trailer * For the intermediate table, approx. 300 mm wide, a mechanical lock to secure the table to the extension * 5 pairs of threaded blocks on the extendable beam for mounting bolt-on rings M20 (LC 5,000 daN) BRAKE SYSTEM

Durumu: yeni, azami yük ağırlığı: 90.700 kg, toplam ağırlık: 126.000 kg, dingil konfigürasyonu: 3 aks, toplam genişlik: 2.850 mm, Donanım: ABS, You can find our complete inventory of immediately and shortly available vehicles on our website. Excerpt from the equipment list. Complete specification available on request. Gooseneck: Hydraulically liftable/lowerable and detachable gooseneck. Length approx. 3,650 mm. For tractor units: 6 x 4 or 8 x 4 3-axle compact front bogie: * Hook coupling at the front and rear. Length: approx. 3,560 mm * Chassis width: approx. 2,850 mm Low bed: * ATX-A low bed with telescoping longitudinal beams in low-floor design with fixed hardwood floor, approx. 50 mm thick * Equipped with drive-over bridge hooks at the front and bolt-lug coupling at the rear * Base width: approx. 2,850 mm, length: approx. 7,150 mm, beam height: approx. 330 mm, beam width: approx. 750 mm * Loading height approx. 480 mm with ground clearance of approx. 150 mm 5-axle rear bogie: * Mechanical bolt-lug coupling for mounting a low bed at the front, end cross member at the rear * Chassis width: approx. 2,850 mm * Chassis length: approx. 6,840 mm * Pendulum axle 3-axle front bogie: * PENDULUM AXLE, all axles hydro-mechanically steered * Hose rupture valve on the axle equalizer cylinder with automatic RESET function * Hydraulic cylinder with shut-off valves and positioning pins for safety in raised position * Final painting of axles with two coats 2K paint, single color in MB7350 Novagrau * Technical axle load: 14,640 kg each (62 km/h) * Hydraulic axle compensation * Front bogie tires: 12 x as per manufacturer's choice (M+S) 285/70 R19.5, load index 150/148J 5-axle rear bogie: * PENDULUM AXLE, all axles hydro-mechanically steered * Hose rupture valve on the axle equalizer cylinder with automatic RESET function * Hydraulic cylinder with shut-off valves and positioning pins for safety in raised position * Final painting of axles with two coats 2K paint, single color in MB7350 Novagrau * Technical axle load: 14,640 kg each (62 km/h) * Hydraulic axle compensation * Rear bogie tires: 20 x as per manufacturer's choice (M+S) 285/70 R19.5, load index 150/148J Paint finish: * HRM metallisation of the entire chassis with ZINACOR 850 (85% zinc/15% aluminium) to ensure maximum corrosion protection * Final coat with two layers of 2K topcoat, single color in RAL 3002 Carmine Red, according to the RAL 841GL system Includes accessories: * Steel front wall, approx. 400 mm high * Plug-in ALU side walls and rear wall for the gooseneck, approx. 400 mm high, anodized version * 3.5" king pin * BEKA-MAX central lubrication for one gooseneck * Multi-coupling hydraulic connections on the gooseneck * Front bogie with a separate air connection for pneumatic tools * BEKA-MAX central lubrication for a 3-axle bogie * Preparation for the installation of bolted container positions for either 1 x 20' or 1 x 30' containers on the outer beams * Without container locks * Brackets on the outer beams of the loading platform for attaching foldable extensions * One 7-pin socket left and right, front and rear, on the rear bogie for warning signs * BEKA-MAX central lubrication for a 5-axle bogie * Socket on the rear bogie for the cable remote control for rear axle steering * Rear bogie with trough * 2 LED reversing lights mounted on the rear plate * European reflective signs (red-yellow) at the rear Gisdpfxsw Tgp Ds Aa Eop * One mudflap at the rear * One LED beacon with bracket left and right on the end cross member * Two INOX toolboxes 855 x 340 x 390 mm mounted left and right on the gooseneck * 1-cycle

Durumu: mükemmel (kullanılmış), dingil konfigürasyonu: 2 dingil, toplam uzunluk: 18.280 mm, toplam genişlik: 2.550 mm, süspansiyon: hidrolik, lastik boyutu: 245/70 R17,5, Üretim yılı: 2026, Donanım: ABS, = Additional options and equipment = - Drop sides - EBS (Electronic Braking System) - Spare wheel - Drum brakes - Central lubrication = Notes = New, unused Faymonville Mega with gooseneck and low bed Hydromechanical forced steering, Hydraulic suspension Fifth wheel height: 1160 mm Load platform length: 6600 mm Extendable from: 5000 mm Loaded platform height: 450 mm Lifting/lowering: -150 mm / +450 mm Vehicle width: 2480–2550 mm Extendable 2" king pin Boom recess Gooseneck hydraulically liftable, lowerable, and detachable Trailing axles with hydromechanical forced steering (incl. remote control) Hydraulic suspension Tyres: 245/70-17.5 3PMSF 1 pair of steel ramps for low bed 2 x central lubrication = Further information = General information Year of manufacture: 2026 Axle configuration Tyre size: 245/70 R17.5 Axle brand: GIGANT Gsdpfx Aaex Tzzpe Esip Brakes: Drum brakes Suspension: hydraulic suspension Rear axle 1: twin tyre; max. axle load: 12,000 kg; steered; tyre tread left inner: 100%; tyre tread left outer: 100%; tyre tread right inner: 100%; tyre tread right outer: 100% Rear axle 2: twin tyre; max. axle load: 12,000 kg; steered; tyre tread left inner: 100%; tyre tread left outer: 100%; tyre tread right inner: 100%; tyre tread right outer: 100% Weights Unladen weight: 13,000 kg Payload: 33,500 kg gross vehicle weight: 46,500 kg Functionality Body make: Faymonville F-S42-2GXX Extendable body: Yes Condition Technical condition: very good Visual condition: very good Further information Please contact Arne Honingh for more information.