Alçak şasi dorseFAYMONVILLE
MAX Trailer MAX100 Semi-Tieflader Planenaufbau
Alçak şasi dorse
FAYMONVILLE
MAX Trailer MAX100 Semi-Tieflader Planenaufbau
Durumu
Yeni
Konum
Essen 

Resimleri göster
Haritayı göster
Makineye ait bilgiler
Fiyat ve Konum
- Satıcının konumu:
- Heegstraße 6-8, 45356 Essen, Almanya

Ara
Teknik detaylar
- Azami yük ağırlığı:
- 36.020 kg
- Toplam ağırlık:
- 48.000 kg
- Dingil konfigürasyonu:
- 3 dingil
- Toplam genişlik:
- 2.540 mm
- Donanım:
- ABS
Teklif detayları
- Listeleme kimliği:
- A217-09008
- Referans no.:
- 37316
- Son güncelleme tarihi:
- 15.04.2026
Açıklama
You can find our complete range of vehicles, including immediately and soon-to-be available models, on our website.
Excerpt from the equipment. Full specification available upon request.
Gujdpfx Aey Auhujg Hea
Gooseneck:
* Gooseneck with rear bevel, approx. 750 mm x 10°
* 3 pairs of lashing rings (LC 5,000 daN)
* Hardwood flooring, approx. 30 mm thick
Load area:
* Load area with rear bevel, approx. 1,000 mm x 8°
* 5 pairs of fold-out lashing rings (LC 5,000 daN)
* 3 pairs of fold-out lashing rings (LC 10,000 daN)
* 1 pair of horizontal lashing rings at the front of the load area (LC 10,000 daN)
* Hardwood flooring, approx. 48 mm thick; over the axles, chequer plate covering
Two-part steel ramps:
* 1 pair of galvanized, two-part steel ramps, approx. 3,185 + 1,420 x 1,250 mm, with grating (C40/5). Point load approx. 2.8 t on a 20 x 20 cm area
* Ramps with hydraulically foldable sections and hydraulic lifting device
* Maximum load per pair: 30,000 kg
Landing legs:
* JOST landing legs (mechanical) with 2-speed gearbox for approx. 24 t lifting capacity (approx. 50 t test load)
Axles:
* BPW axles and suspension, 2 fixed axles, 1 trailing steer axle
* Technical axle load: 12,000 kg each
* Electromagnetic reverse lock, activated via reverse gear and manually
* Air suspension with lift and lower valve
Tyres:
* Tyres: 235/75 R 17.5 3PMSF – make at our discretion
TPMS:
* Tyre Pressure Monitoring System (TPMS) according to ECE R 141
Braking system:
* WABCO braking system compliant with EU regulations, with EBS-E (2S2M), without connection lines to the tractor unit
Steel construction:
* High-strength fine-grained steel construction
* Steel grades: S355J2+N/S355MC (yield strength 355 MPa), S690QL/S700MC (yield strength 690 MPa)
Electrical system:
* Electrical system in accordance with EU regulations, LED lighting 24 Volt ASPÖCK-NORDIK (ASS3)
* All LED side marker lights flash with the indicator
* ASPÖCK-UNIBOX at the front connection rail with 24N, 24S & 15-pin sockets according to ISO: 24N ISO-1185, 24S ISO-3731, 15-pin ISO-12098
Coating:
* HRM metallization of the entire chassis using ZINACOR 850 (85% zinc / 15% aluminium) for optimal corrosion protection
* Final coating with 2 layers of 2-component topcoat, single-colour, RAL 3002 carmine red, according to RAL System 841GL
* Rear section metallized and painted in RAL 9010 (pure white)
* Wheel rims in silver
Incl. accessories:
* One bracket each for warning signs (left/right) at gooseneck and rear, incl. socket
* 1 spare wheel carrier under the load area on the right
* 2-inch kingpin
* One galvanized steel front wall
* At the galvanized front connection rail: yellow-red air couplings
* 4 wheel chocks with holders at the front wall
* 3-tier wooden planks
* Galvanized folding supports under the rear bevel
* Holder for beacon at the rear of the trailer
* Height-adjustable curtain structure – approx. 3,960 mm
* Galvanized front wall with locking mechanism for sliding curtains, height adjustable by approx. 400 mm
* EDSCHA brand roof, forward-slidable on aluminium roof profile (bolted to front and rear walls)
* 3 pairs of movable stanchions in the load area
* Body hydraulically expandable to left/right at rear by approx. 750 mm
* Sliding roof with high-lift portal carrier
* Sliding curtain with approx. 700 mm extra length, tensioning straps spaced approx. 600 mm apart. Height O
Bu ilan otomatik olarak tercüme edildiğinden bazı çeviri hataları oluşmuş olabilir.
Excerpt from the equipment. Full specification available upon request.
Gujdpfx Aey Auhujg Hea
Gooseneck:
* Gooseneck with rear bevel, approx. 750 mm x 10°
* 3 pairs of lashing rings (LC 5,000 daN)
* Hardwood flooring, approx. 30 mm thick
Load area:
* Load area with rear bevel, approx. 1,000 mm x 8°
* 5 pairs of fold-out lashing rings (LC 5,000 daN)
* 3 pairs of fold-out lashing rings (LC 10,000 daN)
* 1 pair of horizontal lashing rings at the front of the load area (LC 10,000 daN)
* Hardwood flooring, approx. 48 mm thick; over the axles, chequer plate covering
Two-part steel ramps:
* 1 pair of galvanized, two-part steel ramps, approx. 3,185 + 1,420 x 1,250 mm, with grating (C40/5). Point load approx. 2.8 t on a 20 x 20 cm area
* Ramps with hydraulically foldable sections and hydraulic lifting device
* Maximum load per pair: 30,000 kg
Landing legs:
* JOST landing legs (mechanical) with 2-speed gearbox for approx. 24 t lifting capacity (approx. 50 t test load)
Axles:
* BPW axles and suspension, 2 fixed axles, 1 trailing steer axle
* Technical axle load: 12,000 kg each
* Electromagnetic reverse lock, activated via reverse gear and manually
* Air suspension with lift and lower valve
Tyres:
* Tyres: 235/75 R 17.5 3PMSF – make at our discretion
TPMS:
* Tyre Pressure Monitoring System (TPMS) according to ECE R 141
Braking system:
* WABCO braking system compliant with EU regulations, with EBS-E (2S2M), without connection lines to the tractor unit
Steel construction:
* High-strength fine-grained steel construction
* Steel grades: S355J2+N/S355MC (yield strength 355 MPa), S690QL/S700MC (yield strength 690 MPa)
Electrical system:
* Electrical system in accordance with EU regulations, LED lighting 24 Volt ASPÖCK-NORDIK (ASS3)
* All LED side marker lights flash with the indicator
* ASPÖCK-UNIBOX at the front connection rail with 24N, 24S & 15-pin sockets according to ISO: 24N ISO-1185, 24S ISO-3731, 15-pin ISO-12098
Coating:
* HRM metallization of the entire chassis using ZINACOR 850 (85% zinc / 15% aluminium) for optimal corrosion protection
* Final coating with 2 layers of 2-component topcoat, single-colour, RAL 3002 carmine red, according to RAL System 841GL
* Rear section metallized and painted in RAL 9010 (pure white)
* Wheel rims in silver
Incl. accessories:
* One bracket each for warning signs (left/right) at gooseneck and rear, incl. socket
* 1 spare wheel carrier under the load area on the right
* 2-inch kingpin
* One galvanized steel front wall
* At the galvanized front connection rail: yellow-red air couplings
* 4 wheel chocks with holders at the front wall
* 3-tier wooden planks
* Galvanized folding supports under the rear bevel
* Holder for beacon at the rear of the trailer
* Height-adjustable curtain structure – approx. 3,960 mm
* Galvanized front wall with locking mechanism for sliding curtains, height adjustable by approx. 400 mm
* EDSCHA brand roof, forward-slidable on aluminium roof profile (bolted to front and rear walls)
* 3 pairs of movable stanchions in the load area
* Body hydraulically expandable to left/right at rear by approx. 750 mm
* Sliding roof with high-lift portal carrier
* Sliding curtain with approx. 700 mm extra length, tensioning straps spaced approx. 600 mm apart. Height O
Bu ilan otomatik olarak tercüme edildiğinden bazı çeviri hataları oluşmuş olabilir.
Tedarikçi
Not: Ücretsiz kaydolun veya giriş yapın, tüm bilgilere erişmek için.
İlk kayıt tarihi: 2003
81 çevrimiçi ilan
İstek gönder
Telefon & Faks
+49 201 8... ilanlar
Bu ilanlar da ilginizi çekebilir.
Küçük ilan
Essen
2.594 km
Alçak şasi dorse
FAYMONVILLEMAX Trailer MAX100 Semi-Tieflader Planenaufbau
FAYMONVILLEMAX Trailer MAX100 Semi-Tieflader Planenaufbau
İlanınız başarıyla silindi
Bir hata oluştu








