Çalışma platformlu yarı römork

FAYMONVILLE MAX Trailer MAX200 Sattelanhänger Megatrailer

Durumu: yeni, toplam ağırlık: 45.000 kg, azami yük ağırlığı: 36.245 kg, dingil konfigürasyonu: 3 dingil, toplam genişlik: 2.540 mm, Donanım: ABS, You can find our complete vehicle inventory, including vehicles available immediately or at short notice, on our website. Selection of features. Full equipment details available upon request. Loading Platform: * Loading platform made of hardwood floor with rear taper approx. 1,000 mm x 8° * 2 pairs of lashing rings (LC 5,000 daN) * 1 pair of lashing rings (LC 10,000 daN) * 6 pairs of outward folding lashing rings (LC 5,000 daN) * 2 pairs of outward folding lashing rings (LC 10,000 daN) * Cut-outs in the external frame of the loading platform for securing straps (LC 2,000 daN) Landing Legs: * JOST landing legs (mechanical) with 2-speed gearbox for approx. 24 t lifting capacity (approx. 50 t test load) Axles: * BPW axles, air-suspended * Disc brakes (approx. 377 mm) * Raise/lower function (ET 120) * Axle toolkit Tyres: * Tyres 435/50 R 19.5 – brand at our discretion * TPMS tyre pressure monitoring system according to ECE R 141. Data transmission to the tractor unit via the standardised EBS interface in accordance with ISO 11992. For correct display, the tractor unit must be able to transmit and display this data. Brake System: * Wabco brake system compliant with EU regulations featuring EBS-E (2S2M) without connecting lines to the tractor unit Steel Construction: * Steel construction made of high-strength fine-grained steels Njdpjw Tpqqefx Afzsdc * Steel grades: S355J2+N/S355MC (yield strength 355MPa) S690QL/S700MC (yield strength 690MPa) Electrical System: * Electrical system according to EU regulations * Lighting 24 Volt ASPÖCK-NORDIK (ASS3) * All LED side marker lights flash with the indicator * ASPÖCK-UNIBOX at the front connector strip with 24N, 24S & 15-pin connectors in accordance with ISO. 24N ISO-1185 24S ISO-3731 15-pin ISO-12098 Paintwork: * Complete steel construction automatically shot-blasted with wheel-blasting machine after welding * Second round of blasting with corundum for optimum adhesion of the coating system * HRM metallisation of the entire chassis with ZINACOR 850 (85% zinc, 15% aluminium) to ensure best corrosion protection * Final coating with two coats of 2-component topcoat, single colour in RAL 3002 Carmine Red according to RAL system 841GL * Rear section metallised and painted in RAL 9010 (Pure White) * Coating system tested by salt spray test in accordance with ISO 9227-NSS * Sealing of cavities with special wax * Metallic paint finish not available Including the following additional equipment: * Yellow-red air couplings on galvanised connector strip at the front * 4 wheel chocks with brackets * 2-inch king pin * Loading platform with heavy-duty hardwood floor * 1 spare wheel holder under the loading platform on the right-hand side * Galvanised folding supports under the platform’s rear taper * 9 pairs of stake pockets for drop-in stakes, approx. 100 x 50 mm, in the external frame of the loading platform * One galvanised steel front wall (EN12642-XL), approx. 1,600 mm high * A painted sand layer applied to the central beam for slip resistance * 1 INOX toolbox mounted transversely under the loading platform, approx. 1,000 x 400 x 2,500 mm * 6 pairs of WADER container pockets in the platform, for 1x 20' container, 2x 20' containers or 1x 40' container * 3 pairs of transverse stake pocket strips mounted in the platform, for drop-in stakes approx. 100 x 50 mm * Storage for max. 9 pairs of drop-in stakes approx. 100 x 50 mm bolted to the inside of the front wall * 2 INOX toolboxes under the loading platform left and right, a