Çalışma platformlu yarı römork

FAYMONVILLE MAX Trailer MAX210 Telesattel

Durumu: kullanılmış, toplam ağırlık: 48.000 kg, azami yük ağırlığı: 38.080 kg, dingil konfigürasyonu: 3 dingil, ilk tescil: 02/2025, bir sonraki muayene (TÜV): 02/2026, toplam genişlik: 2.540 mm, Donanım: ABS, You can find our complete vehicle inventory, including immediately and short-term available units, on our website. The following is an extract of the equipment; the full equipment list is available upon request. Platform: • Retractable platform with pneumatically operated locking system • Platform with approx. 30 mm thick wooden flooring, framed in omega profiles • 7 pairs of outward-folding lashing rings (LC 5,000 daN) • 3 pairs of outward-folding lashing rings (LC 10,000 daN) • Cutouts in the outer frame of the platform for securing straps (LC 2,000 daN) Landing Legs: • JOST mechanical landing legs with 2-speed gearbox for approx. 24 t lifting capacity (approx. 50 t test load) Axles: • BPW axles and suspension • All axles hydraulically and mechanically forced-steered • Equipped with disc brakes • Technical axle load: 10,000 kg each (offset 0) • Air suspension with lifting and lowering valve • Axle tools Tyres: • Tyres 385/65 R 22.5 Brake System: • Brake system in accordance with EU regulations, with EBS-E (2S2M), without connecting lines to the tractor unit Warning Signs: • On the gooseneck and rear panel, left and right respectively, each with a bracket for warning signs including socket Electrical System: • Electrical system according to EU regulations • Lighting 24 Volt ASPÖCK-NORDIK (ASS3) • ASPÖCK-UNIBOX at the front connection strip with 24N, 24S & 15-pin sockets, connections according to ISO 24N ISO-1185, 24S ISO-3731, 15-pin ISO-12098 Steel Structure: Dedjxf Sifopfx Abpjku • Steel construction made from high-strength fine-grain steels • Steel grades: S355J2+N/S355MC (yield strength 355 MPa), S690QL/S700MC (yield strength 690 MPa) Paintwork: • Premium and durable corrosion protection of the standard shot-blasted welded frame, guaranteed by a 2-component (2K) zinc dust primer • High-quality 2-component (2K) top coat, single-colour RAL 3002 carmine red • Rims in silver; attachments in manufacturer’s choice • Rear section metallized and painted in RAL 9010 (pure white) Standard Accessories Included: • 2" king pin • 4 wheel chocks with holders on the front wall • Remote steering from the front and rear via cable remote control with push buttons, with axle tracking control (installation in tractor unit not required) • Manual and documentation on USB stick • Electro-hydraulic unit • Yellow-red air couplings on the galvanized front connection strip • Yellow reflective tape on the sides, extension and rear in accordance with EU regulations • European reflective signs (red-yellow) on the rear of the trailer • Mud flap on the trailer rear • Mounting bracket for a beacon at the rear of the trailer • 10 pairs of stake pockets for 100 x 50 mm plug-in stakes in the outer frame of the platform • 1 spare wheel holder under the platform on the right in direction of travel • Speed stickers (80 km/h) on the rear and both sides • Load gauge for determining axle loads including load chart • Galvanized steel front wall (EN12642-XL), approx. 1,600 mm high • 6 pairs of WADER container pockets in the loading area, for 1 x 20', 2 x 20', or 1 x 40' container; an additional locking position in the extension for a 45' container • 4 pairs of transverse stake pocket strips mounted in the platform, for approx. 100 x 50 mm plug-in stakes • Storage for plug-in stakes inside on the front wall • Access ladder mounted on left and right in direction of travel • One INOX toolbox, approx. 1,200 x 460 x 550 mm, at the front under the platform on the left in direction of travel •

Durumu: yeni, toplam ağırlık: 48.000 kg, azami yük ağırlığı: 38.400 kg, dingil konfigürasyonu: 3 dingil, toplam genişlik: 2.540 mm, Donanım: ABS, You can find our complete vehicle stock with immediately and short-term available vehicles on our website. Excerpt of the equipment. Complete equipment list available upon request. Loading platform: * Extendable loading platform with pneumatically operated locking mechanism * Loading platform with approx. 30 mm thick wooden planks * 7 pairs of folding lashing rings to the outside (LC 5,000 daN) * 3 pairs of folding lashing rings to the outside (LC 10,000 daN) * Cutouts in the outer frame of the loading platform for attaching tension belts (LC 2,000 daN) Landing legs: * JOST landing legs (mechanical) with 2-speed gearbox for approx. 24 t lifting capacity (approx. 50 t test load) Tyres: * Tyres 385/65 R 22.5, brand of our choice * TPMS tyre pressure monitoring system according to ECE R 141. Data transmission to the tractor unit takes place via the standardized EBS interface according to ISO 11992. The tractor unit must be capable of receiving and displaying this data for accurate monitoring. Axle: * BPW axles and suspension * All axles hydro-mechanically forced-steered * Disc brakes * Technical axle load: 10,000 kg each (ET 0) * Air suspension with lifting and lowering valve * Axle tools Brake system: * WABCO braking system according to EU regulations with EBS-E (2S2M), without connecting lines to the tractor unit Steel construction: * Steel construction made of high-strength fine-grained steels * Steel grades: S355J2+N/S355MC (yield strength 355MPa) S690QL/S700MC (yield strength 690MPa) Electrical system: * Electrical system in accordance with EU regulations * 24 Volt LED lighting ASPÖCK-NORDIK (ASS3) * All LED side marker lights flash with the indicator * ASPÖCK-UNIBOX at the front connection rail with sockets 24N, 24S & 15-pin. Connection according to ISO. 24N ISO-1185 24S ISO-3731 15-pin ISO-12098 Painting: * Complete steel construction automatically blast-cleaned by shot blasting machine after welding * Second blasting with corundum for optimal coating adhesion * Final coating with 2 layers of 2K top coat, single-colour in RAL 3002 Carmine Red according to RAL System 841GL * Rims in silver grey * Rear section metallized and painted in RAL 9010 (Pure White) * Metallic paint not possible * Coating structure tested in salt spray test according to ISO 9227-NSS * Cavity sealing with special wax Dkodjw Tpr Iepfx Abpsu Accessories: * Remote steering from the front and rear via cable remote control with push buttons, with axle tracking control (installation in the tractor unit not included) * Electro-hydraulic unit * 4 wheel chocks with holders at the front wall * 2 inch king pin * At the galvanized connection rail in front, yellow-red air couplings * Mountings for warning boards left and right on neck and rear, including socket * 10 pairs of stanchion pockets for plug-in stakes approx. 100 x 50 mm in the outer frame of the platform * One galvanized steel front wall (EN12642-XL), approx. 1,600 mm high * 6 pairs of WADER container locks in the loading area, for 1 x 20' container, 2 x 20' containers, or 1 x 40' container; an additional locking point provided in the extension for a 45' container * 4 pairs of transverse stanchion pockets mounted across the platform for plug-in stakes approx. 100 x 50 mm * Storage for up to 9 pairs of plug-in stakes bolted to the front wall on the inside * Climbing ladder mounted left and right in the direction of travel * One INOX toolbox, approx. 1,200 x 460 x 550 mm, mounted at the front under the loading platform on the l

Durumu: kullanılmış, toplam ağırlık: 48.000 kg, azami yük ağırlığı: 36.300 kg, dingil konfigürasyonu: 3 dingil, ilk tescil: 08/2024, bir sonraki muayene (TÜV): 08/2025, toplam genişlik: 2.540 mm, Donanım: ABS, You can find our complete range of vehicles with immediately and short-term available stock on our website. Extract from the equipment list. Full specification available on request. - Loading platform with double-extension design and pneumatically operated locking mechanism - A fixed intermediate platform, approx. 250 mm wide, is mounted on the central beam - BPW axles and suspension, all axles hydro-mechanically forced-steered - Air suspension with lift and lower valve - Tyres 385/65 R 22.5 - JOST landing legs (mechanical) with 2-speed gearbox, approx. 24 t lifting capacity (approx. 50 t test load) - Braking system in accordance with EU regulations, incl. EBS-E (2S2M) - Disc brakes - 2-inch kingpin - Electro-hydraulic unit - Remote steering at the front and rear via cable remote control - 10 pairs of stake pockets for insertion stakes approx. 100 x 50 mm in the outer frame of the loading platform - Load gauge to determine axle loads including load chart - Galvanised steel front wall (EN12642-XL), approx. 1,600 mm high - 6 pairs of WADER container pockets in the platform for 1 x 20' container, 2 x 20' containers or 1 x 40' container; for extension an additional locking point is provided for a 45' container - 5 pairs of crosswise stake pocket strips mounted in the platform - Storage for max. 9 pairs of insertion stakes approx. 100 x 50 mm, located internally at the front wall - One INOX toolbox, approx. 1,200 x 460 x 550 mm, mounted under the loading platform at the front left and right - Central lubrication system with 2 BEKAMAX pumps (Pico) - 2 LED reversing lights mounted on the rear panel - Acoustic warning signal when reversing - Rear underrun protection, left and right, on the rear cross member Dksdpfx Abopkx Easpou - 2 pairs of ferry rings under the gooseneck and 2 pairs at the rear - HRM Metallisation (High Resistance Metallisation) - Single-tone paint in RAL 3002 carmine red

Durumu: yeni, toplam ağırlık: 48.000 kg, azami yük ağırlığı: 34.660 kg, dingil konfigürasyonu: 3 dingil, toplam genişlik: 2.540 mm, Donanım: ABS, You can find our complete stock of vehicles, available immediately and at short notice, on our website. Excerpt from the equipment list. Full specifications available on request. Cargo Bed * Double extensible version with pneumatically operated locking mechanism * 2 pairs of recessed lashing rings (LC 5,000 daN) Dkedok Ugacopfx Abpou * 1 pair of recessed lashing rings (LC 10,000 daN) * 7 pairs of outwards-folding lashing rings (LC 5,000 daN) * 3 pairs of outwards-folding lashing rings (LC 10,000 daN) * Cutouts in the outer frame of the cargo bed for attaching tensioning straps (LC 2,000 daN) Landing Legs * JOST landing legs (mechanical) with 2-speed gearbox for approx. 24 t lifting capacity (approx. 50 t test load) Tyres * 235/75 R 17.5 3PMSF Axles * BPW axles, hydro-mechanically forced steered * Air suspension with lift and lower valve Brake System * In compliance with EU regulations with EBS-E (2S2M), without connecting lines to the tractor unit Steel Construction * Made from high-tensile fine-grained steels. Steel grades: S355J2+N/S355MC (yield strength 355 MPa), S690QL/S700MC (yield strength 690 MPa) Paintwork * High-quality, durable corrosion protection of the standard shot-blasted welded frame ensured by a 2-component (2K) zinc-rich primer * High-quality 2-component (2K) single-tone top coat in RAL 3002 Carmine Red * Rear section metallised and painted in RAL 9010 (Pure White) * Wheels in silver Including Accessories * Remote steering front and rear via cable remote control with push-buttons, with single-track axle alignment (without installation in tractor unit) * Electro-hydraulic unit * 4 wheel chocks with holders on the front wall * 2-inch kingpin * At the galvanised connection strip at the front, yellow-red air couplings * Yellow reflective tape according to EU regulations on the sides, extension, and rear of the trailer * European reflective plates (red-yellow) at the rear of the trailer * One mud flap at the rear of the trailer * Manual and documentation on USB stick * Cargo bed with robust hardwood floor * 10 pairs of stake pockets for 100 x 50 mm stakes in the outer frame of the cargo bed * Bracket for a rotating beacon at the rear of the trailer * Galvanised supports beneath the sloped area of the cargo bed * Bracket for a rotating beacon at the rear of the trailer * Mounting rail for aluminium drive-on ramps at the rear of the vehicle * 80 km/h speed stickers on the rear and both sides * Load gauge for determining axle loads, including load diagram * One galvanised steel front wall (EN12642-XL), approx. 1,600 mm high * Central lubrication system with 2 BEKAMAX (Pico) pumps with standard grease NLGI-2 and removable pump protection * Spiral cable to supply the electro-hydraulic unit and/or electric winch (approx. 35 mm², approx. 3.5 m long, max. 250A) between trailer and tractor unit with connector (NATO-NATO) * Non-slip sand-coated surface on the central beam * 6 pairs of WADER container pockets in the cargo bed, for 1 x 20' container, 2 x 20' containers, or 1 x 40' container; additional locking position provided in the extension for a 45' container * 5 pairs of crosswise stake pocket strips installed in the cargo bed for 100 x 50 mm stakes * Storage for up to 9 pairs of 100 x 50 mm stakes, inside on the front wall * One INOX toolbox, approx. 1,500 x 390 x 810 mm, mounted under the cargo bed on the left and right in the direction of travel * Four warning boards, extendable by approx. 400 mm, approx. 423 x 423 mm, with