Alçak şasi dorse

FAYMONVILLE MultiPLUS-Z-3L-UB-12AT-9.60-17.5-2.54-GR

3-axle MULTIMAX PLUS low-loader semi-trailer, air-suspended and hydraulically forced-steered axles.

Technical Data MultiPLUS-Z-3L-UB-12AT-9.60-17.5-2.54-GR

Speed: 80 km/h legal
Gross weight: 49,500 kg or 31,500 kg
Fifth wheel load: 18,000 kg
Axle load: 31,500 kg
Gooseneck length approx.: 3,900 mm
Gooseneck width approx.: 2,480 mm
Kingpin turning radius to rear approx.: 2,100 mm
Coupling height when loaded approx.: 1,205 mm
Loading area length approx.: 9,600 mm
Extendable by approx.: (value not specified)
Loading area width approx.: 2,540 mm
Loading height at max load approx.: 890 mm
Suspension travel approx.: -55/+145 mm
Axle distance: 1,360 mm
Gross weight dependent on fifth wheel load: Yes
Special permit required if country-specific legal limits are exceeded.

Technical Description

Gsdsizu Ntspfx Aa Ejip
Gooseneck: SNT design gooseneck to optimize loading platform length, approx. 3,900 mm length, with rear chamfer approx. 1,000 mm x 6°.
Technical fifth wheel load: 18,000 kg. For tractor units: 4x2 and 6x2.

Loading area: Loading platform approx. 9,600 mm length with rear chamfer approx. 900 mm x 6°. Section after the gooseneck is hydraulically raisable/lowerable, approx. 3,000 mm long, loadable up to approx. 9,000 kg.

Ramps: DR-10-900-4920-GR-HV-AXS
Pair of two-section AXS steel ramps, approx. 4,920 mm long and 900 mm wide. Open grating surface. Hydraulically folding ramp tips. Each ramp hydraulically shiftable approx. 235 mm outward and approx. 365 mm inward. Maximum load and ramp angle as per technical datasheet: C470319. Maximum gradient at lowered loading area: 9°

Axles and Suspension: BPW axles and suspension, all axles hydro-mechanically forced-steered. Technical axle load: 12,000 kg. Air suspension with lift/lower valve. Axle tools included.

Tyres: 235/75 R 17.5 3PMSF twin tyres. Brand at our discretion. Load index 143/141J (144/144F).

Braking system: WABCO EBS-E braking system per EU regulations. No cables to the tractor unit.

Lighting system: 24V "ASPÖCK-NORDIK full LED" lighting per EU regulations (ASS 3).

Metallisation: Complete HRM (High Resistance Metallisation). Full steel structure shot-blasted, then hot-coated with ZINACOR 850 (85% zinc / 15% aluminium).

Painting – 6-stage finish:
- Complete steel structure shot-blasted after welding
- 1 coat zinc-based primer, 1 coat adhesion primer
- Top coat with 2 coats 2K acrylic paint, single colour in RAL shade of choice
- Cavity sealing with special wax
- Rims in silver
- Multicolour & special paint available at extra cost

Steel structure: High-tensile fine-grain steels
Types: S355J2+N/S355MC (yield stress 355 MPa), S690QL/S700MC (yield stress 690 MPa)
Welders certified to DIN-EN 287-1, MAG welding per EN ISO 4063, M21 shielding gas as per EN ISO 14175.

Front wall: Removable steel front wall, approx. 400 mm high.
Supply connection strip for connections to tractor unit, fitted at outer frame profile height.

ASPÖCK-UNIBOX at the front supply strip with 24N, 24S & 15-pin sockets.
- 24N connection per ISO-1185
- 24S connection per ISO-3731
- 15-pin connection per ISO-12098
If your pin assignment deviates from the ISO standard, please inform us.

"Anderson" socket on front supply strip: Rema 78051-00 & Amp. 150 V.

Cable for the supply of the electro-hydraulic power pack and/or electric winch (35 mm²,

Bu ilan otomatik olarak tercüme edildiğinden bazı çeviri hataları oluşmuş olabilir.