Alçak şasi dorse

FAYMONVILLE Plateauauflieger MAX200-N-3A-13.60-19.5-2.54

MAX200-N-3A-13.60-19.5-2.54

Technical Data

Speed: 80 km/h
Gross vehicle weight: 45,000 kg
Fifth wheel load: 18,000 kg
Axle load: 27,000 kg
Tare weight (+/- 3%): 8,844 kg
Payload approx.: 36,156 kg
Platform length: 13,600 mm
Loaded fifth wheel height: 950–1,050 mm
Swing clearance at rear: 2,300 mm
Extendable by: 3,400 mm
Axle spacing: 1,360 / 1,405 mm
Overall width: 2,540 mm

Technical Description

Load platform:
Load platform in extendable design with pneumatically operated locking mechanism.
2 pairs of lashing rings (LC 5,000 daN).
1 pair of lashing rings (LC 10,000 daN).
6 pairs of fold-out lashing rings (LC 5,000 daN).
2 pairs of fold-out lashing rings (LC 10,000 daN).
Cut-outs in the outer frame of the platform for attaching tension straps (LC 2,000 daN).

Landing legs:
JOST mechanical landing legs with 2-speed gearbox for 24 t lifting capacity (50 t test load).

Axles:
SAF axles: SAF CD axles, air-suspended, with disc brakes (377 mm), with lift/lower function (ET 120).
Trailing steering axles with electro-magnetic reversing lock, activated via reverse gear or manually.
Axle tools (± 80 kg).

Brake system:
Brake system according to EU regulations with EBS-E (2S2M) without connecting lines to the tractor unit.

Steel construction:
Steel structure made of high-strength fine-grain steels.
Steel grades:
S355J2+N / S355MC (yield strength 355 MPa)
S690QL / S700MC (yield strength 690 MPa)

Paintwork:
Premium, long-lasting corrosion protection for the standard shot-blasted welded frame ensured by a two-component (2K) zinc-rich primer. High-quality two-component (2K) topcoat, single-colour, in RAL tones of your choice.
Rear section metallised and painted in RAL 9010 (pure white).
Metallic paint not available.

Electrical system:
Electrical system according to EU regulations, LED lighting 24 Volt ASPÖCK-NORDIK (ASS3).
ASPÖCK-UNIBOX on the front connector panel with sockets 24N, 24S & 15-pin.
Connections according to ISO:
24N ISO-1185
24S ISO-3731
15-pin ISO-12098

Standard accessories included:
Yellow-red air couplings on the galvanised front connector panel.
2 wheel chocks with holders.
2" kingpin.
Galvanised steel front wall, approx. 2,200 mm high (± 105 kg), EN12642-XL compliant.
Hnjdpfsg Sk Tvex Ag Njg
Yellow reflector tape according to EU regulations; fitted along the sides, on the extension, and the rear of the trailer.
European reflective warning plates (red-yellow) at the rear of the trailer.
Platform with approx. 38 mm hardwood floor (± 320 kg).
10 pairs of stake pockets for plug-in stakes 100 x 50 mm in the outer frame of the platform (± 30 kg).
1 spare wheel holder under the platform, right-hand side in direction of travel.
Tyres 435/50 R 19.5, manufacturer’s choice.
One mud flap at the rear of the trailer.
Manual and documentation on USB stick.
Bracket for rotating beacon at the rear of the trailer.
At the gooseneck and rear panel, left and right, brackets for warning signs, incl. socket.
One transverse INOX toolbox under the platform (1,000 x 400 x 250 mm) (± 135 kg).
6 pairs of WADER container locks in the platform for 1 x 20’ container, 2 x 20’ containers or 1 x 40’ container; an additional locking position provided in the extension for a 45’ container (± 90 kg).
4 pairs of WADER container locks (± 60 kg).
10 pairs of galvanised plug-in stakes approx. 100 x 50 mm, 1,000 mm high (± 220 kg).
3 pairs of crosswise stake pocket bars mounted in the platform for plug-in stakes 100 x 50 mm (± 95 kg).
Storage for 1,000 mm plug-in stakes (± 45 kg).
1 spare wh

Bu ilan otomatik olarak tercüme edildiğinden bazı çeviri hataları oluşmuş olabilir.