Yürüyen zeminli yarı römork

Fliegl 3-Achs Schubbodenauflieger 92m³

The images are archive pictures; the vehicle may still be in use!

Weights and Dimensions:
Gross weight, permitted / technical: 35,000 / 39,000 kg
Payload, permitted / technical approx.: 27,548 / 31,548 kg
Aggregate weight, permitted / technical: 24,000 / 27,000 kg
Permitted / technical kingpin load: 11,000 / 12,000 kg
Unladen weight (basic version) approx.: 7,452 kg +/- build tolerance

Overall length approx.: 13,800 mm
Overall width max.: 2,550 mm
Overall height approx.: 4,005 mm
Internal length approx.: 13,460 mm
Internal width approx.: 2,470 mm
Internal height front approx.: 2,655 mm
Internal height rear approx.: 2,853 mm
Volume approx.: 92 cbm
Fifth wheel height approx.: 1,130 mm
King pin installation dimension approx.: 1,640 mm
Front corner measurement approx.: 2,040 mm

Chassis Semi-trailer Freight Forwarder
Fine-grain steel welded lightweight construction up to the landing legs, fifth wheel plate with replaceable 2'' kingpin
Lashing point preparations integrated in the floor (up to 13 pairs)
24 t 2-speed landing gear, one-sided operation, with straight lower section, without compensating adjustment
Extendable ladder at rear
Side door holders
Wheel chocks with brackets
Aluminum side underrun protection
Steel rear underrun protection with wide Fliegl mudflaps
Foldable protective cover for lighting unit
Quarter-shell mudguards
Rear collision protection

Axles + Suspension
BPW disc brake axles
Air suspension
1st axle with automatic lift axle function, including forced lowering and starting aid, activated by braking three times

Brake System
2-line compressed air brake system
Color-coded pipe routing for easy service
Spring-loaded parking brake
2 fail-safe coupling heads at the front, without connecting line
EBS, electronic brake system with EBS socket at the front, without connection cable
Ijdpfx Aewk Dc Rspysau

Wheels 385/55 R22.5"

Electrics
24 Volt, multi-chamber lights, side yellow LED lighting
2 white front position lights
2 white/red lane marker lights at rear
2 x 7-pin fail-safe sockets at front, without connection cable

SB Hydraulics
Hydraulic cylinder with sliding mechanism installed in the floor. Dual-circuit hydraulics.
Note: A dual-circuit hydraulic system is required!
Recommended pump output:
Capacity: 110 l/min
Pressure: 250 bar
Minimum oil tank volume: 100 l

SB Tipper Body
Aluminium box body made from high-quality, wear-resistant material. Front and side walls made of aluminium hollow profiles, all around the top welded with a wide special reinforcement profile made of aluminium, welded to a special frame at the bottom.
Moving side wall for better unloading of the load, with reinforced curtain flaps at the bottom.
Rear wall made of aluminium hollow profiles, double-wing door split 1/2 to 1/2, all around edged with a special U-profile with stop and rubber sealing, with 2 external rotary bar locks, locked above and below. Rear wall with mechanical safety lock, operated at the rear on the left in direction of travel. With swivelling crossbar at the top.
Work platform with ladder access on both sides (left/right in direction of travel) and railing, for opening and closing the roof tarpaulin
Removable and swiveling crossbars for tarp support + tarp support at the front bulkhead and at the rear on the back wall,
Roll-out tarpaulin stored on one side with 2 longitudinal tensioning straps, 3 ratchet straps at the side, at the front bulkhead and over the rear doors the tarpauli

Bu ilan otomatik olarak tercüme edildiğinden bazı çeviri hataları oluşmuş olabilir.