Açık kasa ve brandalı treyler

Fliegl

The images provided are archive photos; the vehicle may still be in operation!

Chassis: Semitrailer for transport companies
Fine-grained steel welded construction, kingpin plate with replaceable 2" kingpin
Outer frame slightly sloped with "Load-Lock profile" for lashing strap attachment
Note: To attach the straps in conjunction with the drop sides, the sides must be opened!
Pair of additional lashing rings integrated into the outer frame, each rated at 2.5 tons
24-ton, 2-speed landing gear, single-sided operation, straight bottom section, without load equalization
Rear extension ladder
Side-mounted door retainers
Wheel chocks with holders
Pallet box for 32 Euro pallets (long version), ground clearance approx. 300 mm.
Note: Free landing gear foot spacing or rearward pivot radius approx. 1930 mm
Rear underrun guard, galvanized steel
Rear spray flaps over the full width
Half-shell mudguards
Anti-spray flap only on the last axle
Rear impact protection
"Blocker": Transverse galvanized steel angle section as forklift and door hinge protection
Pair of ferry lashing rings, yellow marked
Pallet stops on both sides approx. 15-20 mm high, bolted design, loading height reduced by approx. 15-20 mm
Spare wheel holder for 1 spare wheel, inc. mounting kit, basket design by Schoch!
Spare wheel, same make as main tyres, steel rim
Stainless steel toolbox, w=600/h=400/d=500 mm, with polished lockable door
Stake pockets
Right side: 5 rows of aluminium V-stake boards
Left side: no stake boards
Rear wall/Rear corner posts
Rear corner posts in steel up to underside of roof, hooks for tarpaulin with round tube and tarpaulin tensioning ratchet
Rear portal doors, double-leaf, each with 2 internal locking rods
Tarpaulin
Tarpaulin with welded horizontal and vertical straps
Quick lock system for side curtain with central lock, one side on left (driver's side)
Stainless steel tension locks on the right (passenger side),
Customs cable running, with holder on front wall (not a customs lock, not in combination with quick lock)
Customer lettering on side curtains and rear portal
Tarpaulin with high-strength spring steel strips, left side
(Attention: No stake boards on the left if fitted)
Roof
Sliding roof, rear end-lift foldable, roof sliding from rear to front, tarpaulin colour: white
EcoLift – roof can be raised by approx. 380 mm on both sides, supported by gas shocks
Optimised rain gutter at the rear, upper end cross member, above doors
Dkodswyiw Ejpfx Abpju
Paintwork
Frame: hot-dip galvanized, including passivation
Landing legs: black coated
Front corner posts: galvanized and painted in front wall color
Front wall: MB 5328 blue
Rear corner posts: galvanized and painted in rear wall color
Rear wall: MB 5328 blue
Tarpaulin: RAL 5010 gentian blue
Pallet box cover: RAL 2011 deep orange

The images provided are archive photos; the vehicle may still be in operation!

Bu ilan otomatik olarak tercüme edildiğinden bazı çeviri hataları oluşmuş olabilir.