Damperli yarı römork

FLIEGL Sattelkipper Stahl- 27cbm

Chassis semi-trailer tipper
Fine-grain steel welded construction, fifth wheel plate with replaceable 2" kingpin
Curved front end "patented"
24 t, 2-speed landing gear, single-side operation, with semi-round lower part and straight connection plate, with load compensation
Uncoupling under load is not possible; when uncoupled, the vehicle must be positioned with the rear lower than the front.
Free rear swing clearance approx. 2100 mm in the rear position and approx. 2600 mm in the front position!
2 wheel chocks with holder
Side underrun protection made of aluminum
Rear underrun protection, pneumatically foldable via switch in the truck operable on PIN 14 (without truck installation) and manual operation on the vehicle
Half-shell mudguards
With anti-spray mud flaps only on the last axle
Tow hook at the rear (not on Revolution model)
Axles & Suspension
SAF disc brake axles with 430 mm disc diameter
Axles for off-road use
Csdpjxclg Ssfx Aatjhd
"Axle/chassis laser alignment" reduces tire wear and fuel consumption
Air suspension
Airbag pressure gauge
1st axle automatic lift axle, additionally electrically operable from the truck, including forced lowering and starting aid, no truck installation required
"Hot-dip galvanized lift axle mechanism"
Hydraulics
Low-pressure cylinder max. 170 bar, smallest stage hard chromed, with HDK screw coupling, fixed part, NW 48 mm. (without hose connection)
Operation hydraulically through truck PTO
Hydraulic connection with hose and HDK screw connector NW = 48 mm with knurled nut
Tipper Body
Steel round body in 'Stone Master Design' made of highly wear-resistant HB 400/450 steel. Inclined front wall with external hydraulic cylinder holder.
Interior with access on the front wall.
Greenline – conical and aerodynamic body shape
Shovel and broom holders outside on the front wall.
"Membrane" tailgate
Tailgate as hydraulic rear flap with large opening upwards, approx. 2,200 mm passage height.
Protective tarp for tailgate.
Tailgate with rubber seal – Note! No guarantee for the seal!
Note! Heat resistant up to max. 170°C!
Continuous sidewalls 4 mm thick, floor 4/5 mm thick, wear and weight optimized design.
Fliegl S.T.E.P. – pivoting front stand platform with foldable access ladder for side entrance at front left, only available in conjunction with "Flip Top sliding roof"
Not insulated; not printed
"Flip Top sliding roof", automatic rear closure as folding bow. Roof slides forward. Electrically operated roof, with 7-pin plug (charging plug) at the front, without connecting cable (pin assignment Pin1: +/ Pin3:-), including tractor unit socket loose, without truck installation. Operation at the trailer and via remote control.
7-pin spiral cable to the truck for sliding roof, truck must have corresponding socket (pin assignment Pin1: +/ Pin3:-).

Bu ilan otomatik olarak tercüme edildiğinden bazı çeviri hataları oluşmuş olabilir.