Damper 3 taraf

Fliegl TLK 118

Further information
Chassis Central Axle Tipping Trailer
Steel welded construction, continuous tipping shaft at the rear with 80 mm ball tip bearing
Gearbox support leg at the front
2 wheel chocks with holders
Steel underrun protection
Lockable storage compartment for loading ramps underneath the platform
Central axle trailer drawbar
Drawbar with certified 40 mm towing eye
Drawbar height adjustable via spindle, max. adjustment range 300 mm
Axles + Suspension
Euro-axles at our discretion, with tapered roller bearings and S-cam brakes
Parabolic suspension with maintenance-free steel-rubber bearing and mechanical axle load equalisation (rocker equaliser)
Wheels and Tyres
235/75 R 17.5
manufacturer's choice
Steel rims, factory silver
Braking System
2-line compressed air braking system
Colour-coded line routing for easy servicing
Hand spindle parking brake
Integral air reservoir
Without ABS, but with mechanical ALB. Maximum permissible speed: 60 km/h
2 unmistakable coupling heads at the front with connecting lines to the tractor unit
Electrics
Dcsdpfx Aei Rizbebven
12 Volt, multi-chamber lights, no side yellow LED lighting, side reflectors
2 white position lights at the front
2 white/red marker lights at the rear
1 x 7-pin 12 Volt plug at the front, with connecting cable approx. 60 cm extended
Hydraulics
Three-way tipper, hydraulic multi-piston press with stroke limiter and safety cable
Low-pressure cylinder up to max. 170 bar, without throttle. If necessary, this must be retrofitted to the truck.
Hydraulic connection with SVK connector NW 10/3, incl. connection hose
Operation hydraulically via PTO from the truck
Tipper Body
Robust tipper body with 4 mm steel sheet floor, steel drop side body, continuous side walls, fold-down and pivot-mounted with central locking at the bottom. Removable corner posts at the rear. Rear wall fold-down and pivot-mounted with central locking at the bottom.
Platform length approx. 4,500 mm, side walls with 5 hinges at the bottom.
Platform width 2,420 mm
5 pairs of lashing eyes in the floor, each 5 t
Operating Instructions
The specified gross weight is technically possible; depending on the load, the gross weight may not be achievable while complying with permissible axle, support, and kingpin loads. (Poor driving and trailing performance possible due to incorrect load distribution)
Country of Registration / Licence Plates
Country of registration: Germany
with Dekra approval and certificate for max. 60 km/h registration, towing vehicle agricultural or forestry tractor (country of registration Switzerland max. 40 km/h possible)
Prepared for single-line license plate holder
Without contour marking / reflective stripes according to ECE R 048
Paintwork
Frame hot-dip galvanised incl. passivation, 15-year warranty against rust-through
Side walls/body RAL 3002 Carmine Red
Note! If the body is galvanised, it will not be painted!
Note! Body interior only primed!
Wide tyres possible at extra cost. 355 / 60 R 18, then loading height approx. 980 mm
Attention: Archive images!

Bu ilan otomatik olarak tercüme edildiğinden bazı çeviri hataları oluşmuş olabilir.