Kipper

Fliegl TSK 118

Durumu: yeni, makine/araç numarası: bdf30cb8a53c70e900bdb40a7, boş ağırlık: 2 kg, azami yük ağırlığı: 9 kg, toplam ağırlık: 11 kg, dingil konfigürasyonu: 2 dingil, lastik boyutu: -, Further Information Chassis Central Axle Tipping Trailer Steel welded construction, continuous tipping shaft at the rear with 80 mm ball bearing support Gear support leg at the front 2 wheel chocks with holder Steel underrun protection Bedpei Riwiefx Acwodk Full-width rear mudflap Quarter-shell mudguards Lockable storage compartment for loading ramps beneath the loading platform Central axle trailer towing device Drawbar with certified 40 mm towing eye Height-adjustable drawbar via spindle, max. adjustment range 300 mm Axles + Suspension BPW drum brake axles Axle/chassis laser alignment to reduce tire wear and fuel consumption Parabolic suspension with maintenance-free steel-rubber bushings and mechanical axle load balance (rocker balance) Wheels and Tires 235 / 75 R 17.5 Manufacturer's choice Steel rims factory silver Braking System 2-line air brake system, colored lines for easy servicing. Manual spindle parking brake Integrated air reservoir ABS and ALB, with ABS plug at the front and connection cable Note: The trailer may only be towed by vehicles that ensure the effectiveness of the ABS! 2 foolproof coupling heads at the front, with connection lines to the truck Electrics 24 Volt, multi-chamber lights, side yellow LED lighting 2 white position lights at the front 2 white/red marker lights at the rear 2 x 7-pin foolproof plugs at the front, with connection cable Hydraulics Three-way tipper system, hydraulic multi-piston ram with lift limiter and safety cable Low-pressure cylinder up to max. 170 bar, no restrictor. If needed, this must be retrofitted to the truck. Hydraulic connection with SVK plug NW 10/3, incl. connection hose Operation hydraulically via truck PTO Tipping Platform Sturdy tipping platform with 4 mm steel floor, steel side walls, continuous side panels, drop-down and pendulum-mounted with central locking at the bottom. Removable rear corner posts. Rear wall drop-down and pendulum-mounted, with central locking at the bottom. Platform length approx. 4,500 mm, sidewalls with 5 hinges at the bottom. Platform width 2,420 mm 5 pairs of lashing rings in the floor, each rated 5 tons Operating Instructions The stated total weight is technically feasible; depending on the load, the total weight may not be achievable while observing permissible axle, support, and saddle loads. (Poor handling and tracking may result from incorrect load distribution) Registration/Country of Origin/Plates Country of registration: Germany With Dekra inspection and certificate (according to §13 EC-FGV) 24/7 service hotline Prepared for single-line license plate holder Conspicuity marking with reflective strips according to ECE R 048, white on sides and red at the rear Paintwork Frame hot-dip galvanized including passivation 15-year warranty against rust-through Sidewall/platform RAL 3002 Carmine Red Rear support, loading ramps, and toolbox optionally available at an extra charge Note: Archive images

Durumu: yeni gibi (kullanılmış), Fonksiyonellik: tamamen fonksiyonel, makine/araç numarası: WFDFLT21201012268, boş ağırlık: 3.240 kg, azami yük ağırlığı: 8.560 kg, toplam ağırlık: 11.800 kg, dingil konfigürasyonu: 2 dingil, ilk tescil: 05/2022, yükleme alanı uzunluğu: 5.000 mm, yükleme alanı genişliği: 2.420 mm, lastik boyutu: 235/75 r17,5, renk: yeşil, işletme ağırlığı: 3.240 kg, Further information Steel welded construction, continuous tipping shaft at the rear with 80 mm spherical tip bearing, gearbox support foot at the front, foldable rear support, wheel chocks with holders, steel underrun protection, rear mudflap covering the full width (not available with forklift holder), quarter shell mudguards, spare wheel, same brand as main tyres, steel rim, loose, plastic toolbox with shelf, width=620 mm / height=360 mm / depth=440 mm, lockable with padlock (lock not included). Note: Dropside contacts the storage box when folded down, lockable storage compartment for loading ramps underneath the loading area, pair of aluminium ramps 3,000 mm long, 360 mm wide, load capacity per pair 8,000 kg (mounting rail for ramps at the rear). Drawbar with certified 40 mm towing eye, height adjustable via spindle, max. adjustment range 300 mm BPW drum brake axles, axles/chassis laser aligned to reduce tyre wear and fuel consumption, parabolic suspension with maintenance-free steel/rubber bearings and mechanical axle-load compensation (rocker balancing) 2-line compressed air brake system, colour-coded piping for easy servicing, manual spindle parking brake. Integral air reservoir, ABS and ALB, with ABS connector at the front, with connection cable. Note: The trailer may only be towed by tractors that guarantee the effectiveness of the ABS. Duomatic coupling at the front, with connecting line to the tractor unit. 24 Volt, multi-chamber lights, side marker LEDs in yellow, 2 white position lights at the front, 2 white/red track markers at the rear, 1 x 15-pin plug at the front, with connecting cable. Three-way tipper system, hydraulic multi-piston press with stroke limiter and safety cable, low-pressure cylinder up to max. 170 bar, without throttle. If required, throttle to be retrofitted on the truck. Hydraulic connection with SVK connector NW 10/3, including connecting hose; operation hydraulically via truck PTO. Sturdy tipping platform with 4 mm steel plate floor, steel dropside body, continuous sidewalls, foldable and pendulum-mounted with central bottom lock. Removable rear corner posts. Tailboard foldable and pendulum-mounted, with central bottom lock, platform length approx. 5,000 mm, side walls with 6 hinges at the bottom. Dropside return springs (not available with split sidewalls), platform width 2,420 mm, pair of lashing eyes in the floor, each rated at 5 tonnes. Operating instructions: The stated gross weight is technically possible; depending on the load, the gross weight may not be achieved while complying with permissible axle, support, and kingpin loads. (Poor driving and trailing behavior possible due to improper load distribution) Country of registration: Germany, with Dekra inspection and certificate (according to §13 EG-FGV), 24/7 service hotline, prepared for single-line license plate holder, contour marking with reflective strips in accordance with ECE R 048, white on the sides and red at the rear. Bdsdek E Tdajpfx Acwek