Değiştirilebilir şasiFliegl
TWP 180 Jumbo Z mit Staplerhalterung
Değiştirilebilir şasi
Fliegl
TWP 180 Jumbo Z mit Staplerhalterung
sabit fiyat KDV hariç
€24.700
Durumu
Yeni
Konum
Triptis 

Resimleri göster
Haritayı göster
Makineye ait bilgiler
- Makine tanımı:
- Değiştirilebilir şasi
- Makine üreticisi:
- Fliegl
- Seri numarası:
- 207ad28f83705ed0d38a4f174
- Durumu:
- yeni
Fiyat ve Konum
sabit fiyat KDV hariç
€24.700
- Satıcının konumu:
- Oberpöllnitzer Straße 8, 07819 Triptis, Almanya

Ara
Teknik detaylar
- Boş ağırlık:
- 3 kg
- Azami yük ağırlığı:
- 11 kg
- Toplam ağırlık:
- 14 kg
- Dingil konfigürasyonu:
- 2 dingil
- Lastik boyutu:
- 235/75 r17,5
Teklif detayları
- Listeleme kimliği:
- A826-5536
- Referans no.:
- 20437522
- Son güncelleme tarihi:
- 22.10.2024
Açıklama
Further information
Chassis Swap Central Axle Trailer
Fine-grain steel welded construction
Front stop, longitudinally adjustable and foldable
Pair of removable guide rollers, front and rear
4 container locks with robust outriggers for 20-foot swap bodies, suitable for swap bodies 7.15 and 7.45 rear-flush (for 7.15 swap bodies, not rear-flush; forklift pockets/frame protrudes)
Telescopic support leg at the front
1 pair of gearbox support feet at the front, with straight lower part and single-sided operation on the right (FR)
Wheel chocks with holder
Aluminium side underrun protection
Steel rear underrun guard
Half-shell mudguards
Mounting for truck-mounted forklift at the rear, incl. 2 fork insertion pockets, 2 extendable support tubes, bracket for chain securing with locking pin. Rear underrun guard with light unit can be folded away. Includes 2 loose rubber pads to protect the rear panel; we recommend counterweight! Note: Partially low ground clearance with forklift, poor trailing behaviour possible, no guarantee! (Forklift self-weight up to max. 1,500 kg for trailers.) (With proximity switch for forklift control in conjunction with lift axle) The forklift mounting shifts the axles rearwards, pay attention to load distribution when driving without a forklift. Customer risk! (For swap body trailers, driving with forklift is only permitted in conjunction with a swap body.) Forklift mount adapted as per AU 203670 for 7.45m swap bodies
Counterweight at the front between the frames, approx. 300 kg, if required, exact check still pending
Drawbar equipment for central axle trailers
Drawbar with approved 50 mm towing eye, forwarding edition (not suitable for trucks with tail lift, exact check still required when ordering)
Undercoupler drawbar
Drawbar without length adjustment
Axles + Suspension
Bdsdpfx Aoi Ri Iajcwjk
SAF drum brake axles as per manufacturer's choice
Axles/chassis laser-aligned to reduce tyre wear and fuel consumption
Air suspension
Brake system
2-line compressed air brake system, colour-coded line routing for easier service
Spring-loaded parking brake
Duomatic connection at front, with connecting line to the tractor, on the left (FR)
Duomatic connection at front, with connecting line to the tractor, connection on the right (FR)
EBS, Electronic Braking System with EBS plug at the front, with connection cable, on the left (FR)
Attention: The trailer may only be towed by towing vehicles that ensure the functionality of the ABS!
With lift & lower valve, holding function in each lift/lower position
Vehicle - Drive stability system
Wheels and Tyres
235/75 R17.5, brand as per manufacturer's choice
Steel twin wheels, factory silver
Electrics
24 Volt, 4 x 3-chamber tail lamps + 1 round reversing lamp + 1 round rear fog lamp, side yellow LED lighting, lights mounted protected!
2 white position lamps at the front
2 white/red lane marking lamps at the rear
1 x 15-pin connector at the front, with connecting cable, on the left (FR)
2 x 7-pin sockets at the rear left (FR) for truck-mounted forklift
1 x 15-pin socket at the rear left (FR) for truck-mounted forklift
LED work lights on both sides behind the 2nd axle (switched via reverse light)
Additional LED work light at rear, switched via reverse light
Approval / Plates
Germany
With Dekra inspection and certificate (as per §13 EC - FGV)
24/7 service hotline
Prepared for single-line license plate holder
Contour markings with reflective tape as per ECE R 048, white on the sides and red at the rear
Painting
Frame DB
Bu ilan otomatik olarak tercüme edildiğinden bazı çeviri hataları oluşmuş olabilir.
Chassis Swap Central Axle Trailer
Fine-grain steel welded construction
Front stop, longitudinally adjustable and foldable
Pair of removable guide rollers, front and rear
4 container locks with robust outriggers for 20-foot swap bodies, suitable for swap bodies 7.15 and 7.45 rear-flush (for 7.15 swap bodies, not rear-flush; forklift pockets/frame protrudes)
Telescopic support leg at the front
1 pair of gearbox support feet at the front, with straight lower part and single-sided operation on the right (FR)
Wheel chocks with holder
Aluminium side underrun protection
Steel rear underrun guard
Half-shell mudguards
Mounting for truck-mounted forklift at the rear, incl. 2 fork insertion pockets, 2 extendable support tubes, bracket for chain securing with locking pin. Rear underrun guard with light unit can be folded away. Includes 2 loose rubber pads to protect the rear panel; we recommend counterweight! Note: Partially low ground clearance with forklift, poor trailing behaviour possible, no guarantee! (Forklift self-weight up to max. 1,500 kg for trailers.) (With proximity switch for forklift control in conjunction with lift axle) The forklift mounting shifts the axles rearwards, pay attention to load distribution when driving without a forklift. Customer risk! (For swap body trailers, driving with forklift is only permitted in conjunction with a swap body.) Forklift mount adapted as per AU 203670 for 7.45m swap bodies
Counterweight at the front between the frames, approx. 300 kg, if required, exact check still pending
Drawbar equipment for central axle trailers
Drawbar with approved 50 mm towing eye, forwarding edition (not suitable for trucks with tail lift, exact check still required when ordering)
Undercoupler drawbar
Drawbar without length adjustment
Axles + Suspension
Bdsdpfx Aoi Ri Iajcwjk
SAF drum brake axles as per manufacturer's choice
Axles/chassis laser-aligned to reduce tyre wear and fuel consumption
Air suspension
Brake system
2-line compressed air brake system, colour-coded line routing for easier service
Spring-loaded parking brake
Duomatic connection at front, with connecting line to the tractor, on the left (FR)
Duomatic connection at front, with connecting line to the tractor, connection on the right (FR)
EBS, Electronic Braking System with EBS plug at the front, with connection cable, on the left (FR)
Attention: The trailer may only be towed by towing vehicles that ensure the functionality of the ABS!
With lift & lower valve, holding function in each lift/lower position
Vehicle - Drive stability system
Wheels and Tyres
235/75 R17.5, brand as per manufacturer's choice
Steel twin wheels, factory silver
Electrics
24 Volt, 4 x 3-chamber tail lamps + 1 round reversing lamp + 1 round rear fog lamp, side yellow LED lighting, lights mounted protected!
2 white position lamps at the front
2 white/red lane marking lamps at the rear
1 x 15-pin connector at the front, with connecting cable, on the left (FR)
2 x 7-pin sockets at the rear left (FR) for truck-mounted forklift
1 x 15-pin socket at the rear left (FR) for truck-mounted forklift
LED work lights on both sides behind the 2nd axle (switched via reverse light)
Additional LED work light at rear, switched via reverse light
Approval / Plates
Germany
With Dekra inspection and certificate (as per §13 EC - FGV)
24/7 service hotline
Prepared for single-line license plate holder
Contour markings with reflective tape as per ECE R 048, white on the sides and red at the rear
Painting
Frame DB
Bu ilan otomatik olarak tercüme edildiğinden bazı çeviri hataları oluşmuş olabilir.
Tedarikçi
İstek gönder
Telefon & Faks
+49 36482... ilanlar
İlanınız başarıyla silindi
Bir hata oluştu






