Alçak şasi römork

Fliegl VTS 400 Sonder

The images are archive photos!

Permissible / technical total weight: 24,000 / 40,000 kg
Permissible / technical payload approx.: 14,600 / 30,600 kg
Permissible / technical axle load: 24,000 / 40,000 kg
Unladen weight (basic version) approx.: 9,400 kg +/- manufacturing tolerance

Overall length approx.: 12,120 mm
Maximum overall width: 2,750 mm
Gooseneck length approx.: 2,850 mm
Low bed platform length in the drive-aisle area incl. rear bevel approx.: 7,145 mm
Rear bevel length approx.: 850 mm
Frame width approx.: 2,750 mm
Loading height in the low bed, laden, approx.: 900 mm
Drawbar height approx.: 950 mm
Drawbar length approx.: 1,700 mm

Chassis – Low-loader trailer
Steel welded construction
Turntable with heavy-duty ball bearing slewing ring
Foldable rear support
2 wheel chocks with holders
Side underrun protection made of aluminium
1 plastic toolbox
Extendable side extensions to 3,250 mm (not on the rear bevel)
(Track width of the construction machinery or vehicles to be transported must not exceed external frame width of 2,750 mm)
Storage compartment for timber planks at the center of the loading area
70 mm timber planks for widening to 3,000 mm
2 pairs of stake pockets in the low bed, recessed in the longitudinal beams of the floor
Lashing rings low-loader:
2 pairs of lashing rings on the gooseneck, each 5t
1 pair of lashing rings in the rear bevel
4 lashing rings recessed centrally in the floor
2 pairs of keyhole profiles in the drive aisle for inserting longitudinal guide rails and for load securing
6 pairs of lashing mushrooms embedded in the low bed external frame, each 10t
5 pairs of stake pockets embedded in the low bed external frame
4 additional pairs of 10t lashing rings:
1x on the gooseneck
3x recessed in the low bed floor

Drawbar and towing equipment:
Turntable-type trailer drawbar with certified 50 mm towing eye

Axles + Suspension:
Drum brake axles
Parabolic suspension with maintenance-free steel-rubber bushings and mechanical axle load compensation front and rear (rocker balancing)

Wheels and tyres:
235 / 75 R 17.5"
Steel twin wheels, factory silver

Brake system:
2-line compressed air braking system
Spring-actuated parking brake
2 unmistakable coupling heads at front with connecting lines to towing vehicle
ABS and ALB, with ABS plug at the front, with connection cable
Note: This trailer may only be towed by vehicles that ensure ABS functionality!

Floor:
Front gooseneck with steel / chequer plate covering
then 70 mm softwood flooring, steel / chequer plate in the wheel arch area
Nkjdpfxsyxq A Hj Ad Hew
Rear bevel with 70 mm softwood flooring

Loading ramps:
Steel ramps, 2,800 mm long, 750 mm wide, laterally adjustable, wood-covered
Hydraulically operated via tractor PTO

Operational notes:
An exemption permit is required for 10,000 kg axle load, only indivisible loads permitted!!!
Note! Excessive length and width require a permanent special permit.
When applying for an exemption in regulated heavy transport, axle load monitoring is mandatory for air-suspended vehicles!!! This applies to all deviations from § 34 German Road Traffic Licensing Regulations (StVZO) (axle and permissible total weight exceedance) requiring a § 70 exception permit.
The specified total weight is technically feasible; however, depending on the cargo, the total weight may not be reached while observing permissible axle/support/king pin loads. (Poor driving and tracking characteristics may occur with improper load distribution)

The images are archive photos!

Bu ilan otomatik olarak tercüme edildiğinden bazı çeviri hataları oluşmuş olabilir.