Sıcak kamaralı döküm makinesi - Dikey

FRECH W20Zn-RC

Clamping force: 240 kN
Clamping platen: 380 x 380 mm
Tie bar spacing: 250 x 250 mm
Machine weight approx. 3.0 t
Clamping stroke: 180 mm
Ejector force: 28 kN
Ejector stroke: 50 mm
Mold height: 120–300 mm
Tie bar diameter: 45 mm
Injection force: 43 kN
Injection stroke: 85 mm
Injection piston diameter: 36, 40, 45 mm
Injection volume (DIN 24480): 47, 63, 87 cm³
Specific injection pressure: 420, 340, 270 daN/cm²
Associated parting surface: 56, 70, 88 cm²
Retraction stroke: 150 mm

Machine equipment:

1.0.2 Clamping unit guard at machine base for weighing scale/chute
1.0.3 Small parts cover in machine base
1.1.0 Motorized safety door, casting side left
1.4.0 Machine mountings
1.5.4 Internal machine lighting
1.11.0 Equipment package – energy efficiency
2.0.1.2 Ejector assistance package Technology incl. SensiEject
2.6.4 Machine assistance system SensiLock®
2.8.0 Hydraulic adjustment of clamping unit
3.0.1.2 Injection assistance package Technology incl. SensiInject
3.2.9 EcoMelTec multi-chamber holding and melting furnace
3.4.4 Pre-fill injection system
3.4.5 Simplified injection piston removal
3.4.6 Injection piston stop in return stroke
3.5.2 Electric nozzle and shot chamber heating
3.5.3 Plug-in connections for electric nozzle and shot chamber heating
4.5.0 Shut-off device for hydraulic assemblies
4.6.1.2 Integrated water circuit control, 2 + 4 circuits
5.1.0 Machine control DATADIALOG – RC
5.1.5 Maintenance advantage package
5.6.1 Cable lengths
6.1.3.1 Wired signal interface for take-out automation DISPO10
6.1.4 Serial interface for 4 heating/cooling circuits
6.1.5 Interface for vacuum unit
6.3.1.1 Operating unit with visualization on support arm
6.5.2 RSD equipment package with switch
7.2.1.2 Spraymotion 411 E with servodrive
Kodpsx Hp E Aefx Ac Hsna
7.2.10 Extended spraying program
7.3.1 Release agent tank TD 20
7.4.0.1 Spray bar CR 155

Bu ilan otomatik olarak tercüme edildiğinden bazı çeviri hataları oluşmuş olabilir.