Malzeme taşıma makinesi

FUCHS MHL340 F (generator)

Durumu: işlem için hazır (kullanılmış), Planing machine with constant table. Maximum planing width: 605 mm. Planing height for 2-sided operation: 200 mm; for 4-sided operation: 170 mm. Planing heads with 6 knives. For feed speeds up to 24 m/min, 3 knives are sufficient. 3 knives are in operation, and 3 sharp knives are kept in reserve. Additional unit: 5th working cutterhead, horizontal, 11 kW. Extraction unit with roller width: 350 mm. Ncedpowg S Tvefx Acuol Options: Pre-planer at the machine infeed. The machine is offered in the following conditions: A) as is B) overhauled C) overhauled with new electrical system !! This planing machine will remain in operation at the owner's site until February 2026 !!

Üretim yılı: 2024, Durumu: yeni, - 4 ayırma aşaması - İstek üzerine gövde uzunluğu - İstek üzerine gövde çapı - Talep üzerine boşaltma yüksekliği Ncjdpfxjpfaubs Acusl - 5,5 KW SEW dişli motor - R127 SEW şanzıman

Durumu: mükemmel (kullanılmış), Üretim yılı: 2003, Fonksiyonellik: tamamen fonksiyonel, planya genişliği: 620 mm, planya yüksekliği: 300 mm, çalışma genişliği: 600 mm, REX SUPERMASTER Year 2003 – SUMA-8/63.WW Machine Number: 22,500 Year of Manufacture: 2003 General Data Machine Type: Planing and profiling machine with chamfering units Total Connected Load: approx. 222.8 kW Feed Speed: 10 – 100 m/min (adjustable, frequency-controlled) Heavy-Duty Outfeed Unit (AZG): 4 rollers, pneumatic roller pressure, cardan drive shafts Tools / Units • Planing Spindles: Bottom planer spindle: 37 kW Top working spindle: 45 kW Right working spindle: 22 kW Left working spindle: 22 kW • Chamfering units (chamfering aggregates): 4 × chamfering units (AFVo / AFVu, left/right, top/bottom) – each 1.85 kW Speed: approx. 5,600 rpm, height adjustable for chamfer width Total number of processing tools: 8 (4 planing / working spindles + 4 chamfering aggregates) Drives Feed unit: approx. 32 kW • Additional motors (separately): Height adjustment (thickness) Width adjustment Chip removal adjustment Machine settings adjustment Extraction System Ncsdpox E Dv Tjfx Acusl Individual extraction nozzles Ø 160–200 mm depending on the unit Total required extraction capacity: approx. 25,350 m³/h Accessories Various planing heads and tools (see photo documentation attached) Control cabinet included The SUPERMASTER series delivers optimal results in the production of high-quality structural timber such as glulam beams, standard laminated beams, or cross-laminated timber (CLT). In addition, SUPERMASTER series machines are also used in the production of cross-laminated timber (CLT) panels. Thanks to the powerful feed system, large, heavy, wet, frozen, as well as small and fine workpieces present no challenge for the SUPERMASTER.

Durumu: kullanılmış, Ekskavatör Üretici: SENNEBOGEN Model: 730E M-HD 2018 model, 27662 m/saat MOTOR: CUMMINS motor QSB 6.7 - C225, 168kW/2000 dev/dk. Emisyonlar US EPA Tier 4 final/EU stage IV standartlarına uygundur, su soğutmalı, elektrikli ısıtmalı su separatörü ve yakıt ön filtresi 24V dahil. Ncsdpfxjw Izius Acujl