Vücut basın

Gannomat / Ganner Concept 70 Eco

LAMELLA CLAMPING/CARCASE PRESS
GANNOMAT « CONCEPT 70 ECO »
Complete in standard configuration with:
- Sturdy, torsion-free steel frame, constructed with welded and bolted joints
- Upper lamella pressing beam with 6 elements, Side lamella pressing beam with 5 elements
- Lamella pressing beams equipped with field-proven tolerance compensation (Ganner system) for tightly pressed carcase joints
- Counter-pressure surfaces (side pressure wall, base) are 38 mm thick, coated, continuous support plates
- Continuous pressing surface with a height of 95 mm on the lower vertical pressing beam
- Electromotive adjustment of both pressing beams via precision trapezoidal lead screws (with increased pitch and concentricity accuracy) and high-performance running nuts with grease reservoirs
- Pressing is performed electromotively through 2 separate worm gear motors (2 x 0.75 kW)
- The pressing force of the beams is continuously adjustable electronically via 2 potentiometers and controlled by inverters, ensuring absolutely wear-free force regulation
- Pressing force for horizontal beam: min. 500 daN (kg) up to continuously max. 2200 daN (kg)
Pressing force for vertical beam: min. 300 daN (kg) up to continuously max. 2200 daN (kg)
Pressing and adjustment speed of the beams with fine positioning, via 3-step selector switch: 5 / 10 / 25 mm/second
- Extremely simple operation
- Working height/loading height: 300 mm
- Working dimensions: Length min: 150 mm, max: 2500 mm
Height min: 150 mm, max: 1400 mm
Depth: 700 mm
Crsdpfxow Td A Ij Aa Ioh
Machine No.: 563.624
400V, 3Ph, 50Hz (3.2 kVA, 16 A)

Set of machine feet for 500 mm working height

Operating manual in German
Completely overhauled by Ganner, 6 months parts warranty

Location: Ex-stock 54634 Bitburg
- Available immediately -

Bu ilan otomatik olarak tercüme edildiğinden bazı çeviri hataları oluşmuş olabilir.