Yuva delme makinesi Dübel delme makinesi

GANNOMAT mit Lieferung nach D und in EU

Dowel and slot boring machine GANNER GANNOMAT JUNIOR 323

Very good condition, the machine is absolutely as new. It comes from an educational institution that was closed about a year after the machine was purchased, so the machine has a maximum of 10 operating hours.

With this machine, you can mill slots and drill dowel holes on two levels without reclamping.

380V, 1500W
2800 rpm
Year of manufacture: 2005

With the machine, you can mill elongated holes for e.g. lock cases and similar items, and produce all types of frame/dowel joints at right angles, butt joints, and mitre joints.

Ideally suited for manufacturing dowel joints in timber frame construction, furniture, door, window, and staircase production, as well as similar applications.

Thanks to drilling on two levels, the pin stops and fences, and the overall design, dowel joints can be produced in the shortest time, making the machine highly economical.

Comes with 2 fold-out table extensions.
The machine requires a compressed air connection of 6 bar (air consumption is very low).
Right-hand rotation.
Mills and drills excellently and cleanly.

Supplied with 2 angle fences (a central fence and a side fence that can be used on either side).
Also includes an adjustable mitre fence.

At the front of the table is a 2000mm long fence rail with two flip stops each; the fence rail can be shortened or extended as needed.

Workpiece clamping is done with 2 pneumatic clamping cylinders.
Height adjustment between drilling levels is also pneumatic; the pneumatic switch is located at the front for quick setting of stops and drilling levels.

Heights of the individual drilling levels can be read off two mechanical counters; above these are adjustment screws for setting drilling heights.

Includes a precision 12mm indexing rail with a centre index and 12 stops each side.

Can be quickly converted for slot mortising; the machine can then be used without indexing, with two adjustable stops left and right, and has a maximum working width of 420mm.

Maximum drilling height: 100mm
Maximum drilling depth: 150mm (with stop and scale)
Maximum workpiece height: 160mm

All functions work flawlessly.
Ledoxqy Dnepfx Afzeru

We offer personal delivery and demonstration throughout Germany for €220.00, so you have no risk when purchasing. Delivery to Austria and the EU is also possible by request.

The machine table is 870mm wide, 140mm deep on the sides, and 350mm deep in the middle.

Professional equipment, not DIY store junk.
Ready for immediate operation.
With 2-jaw drill chucks up to 20mm.
Very robust and durable design.
The precision guides with play-free ball bearing bushings are intact and move smoothly.

Bu ilan otomatik olarak tercüme edildiğinden bazı çeviri hataları oluşmuş olabilir.