Vücut basın

Gannomat Concept 70 Easy

SURFACE – CARCASE PRESS
GANNOMAT "CONCEPT 70 EASY 170"

Complete in standard configuration with:
- Stable, distortion-free steel frame in welded and bolted construction
- SIDE pressing beam with continuous pressure surface and 25 mm thick coated support plate
- Counter-pressure surfaces (side pressure wall, base) are 25 mm thick, coated, continuous support plates
- Electromechanical adjustment of the pressing beam via precision trapezoidal screw spindles (with increased pitch and concentricity accuracy) and high-performance running nuts with grease reservoir
- Pressing is performed electro-mechanically via a worm gear motor (0.75 kW)
- The pressing force of the pressing beam is continuously adjustable electronically via potentiometer and regulated by frequency inverter, making the pressing force control completely wear-free
- Pressing force for vertical pressing beam: min. 300 daN (kg) up to infinitely variable max. 2200 daN (kg)
- Pressing and adjustment speed of the pressing beams with fine positioning, via 3-stage selector switch: 5 / 10 / 25 mm/second
- Jog mode for precise positioning of the pressing beam, e.g. for low pressing forces (drawers, etc.)
- Very simple operation via 2 separate pushbuttons, 2 motion sequences (open/close) can be selected via control panel
- Freely adjustable pressing time preselection 0-30 min (switchable to seconds or hours), with individually programmable opening dimensions of both pressing beams
- Re-press function to increase or decrease the pressing force during the pressing process
- Working height/loading height: 200 mm
- Working dimensions:
Length min: 150 mm, max: 1300 mm
Height min: 150 mm, max: 1700 mm
Depth: 700 mm
Chsdpfsw Sgnkox Ad Usc

Electrical connection: 400 Volt, 50 Hz, 16 A

Available: at short notice

Bu ilan otomatik olarak tercüme edildiğinden bazı çeviri hataları oluşmuş olabilir.