V4A'dan yapılmış, 3690 litrelik ısıtılabilir/soğutulabilir reaktör, kiriş karıştırıcı ile

HANAG 8758

GENERAL
Design: suspended
Notes: Support ring made of Fe; manway cover incomplete; for one vessel, most of the heating connections have been cut off and are supplied loose; one vessel is approximately 100 mm lower overall due to differing motor/gearbox units.
Speed: 42 - 211 rpm
Internal diameter: 1,600 mm
Explosion protection: Motor is explosion-proof (compliance with current ATEX regulations under site conditions must be verified)
Total height: 3,750 mm
Heating/Cooling: available
Power: 3 kW
Max. allowable operating temperature: 200 °C
Max. allowable operating overpressure: 16.0 bar
Max. overpressure: 3.2 bar
Agitator: blade-type agitator
Supporting type: ring
Location: Bremen
Technical documentation: drawings, various documents, inspection certificate
Cylinder temperature control: half-pipe coil
Nameplate:
Vacuum: 1.0 bar
Volume: 3,690 liters
Double jacket volume: 145.0 liters
Cylinder wall thickness: 6 mm
Product-contact material: V4A 1.4435 (AISI316)
Condition: used
Cylindrical height: 1,380 mm
Previous use: pharmaceutical chemicals

VESSEL
Max. allowable operating temperature: 200 °C

HEATING/COOLING JACKET
Max. allowable negative operating pressure: 1.0 bar
Bottom temperature control: half-pipe coil

EQUIPMENT
Manway / dome: in the top head (DN 500)
Outlet: 130 mm

MATERIAL SPECIFICATION
Temperature control system material: V2A 1.4301 (AISI304)

Duedpfx Aoxqax Ejdmjl
AGITATOR 1
Agitator manufacturer: Ekato
Voltage: 400 V

TECHNICAL DATA / DIMENSIONS
Bottom wall thickness: 6.1 mm
Agitator arrangement: centrally in top head
Agitator features: minor differences in agitator design (Interprop blade agitator mounted on the shaft for media up to approx. 3000 mPas; for one vessel, an additional stabilizing propeller is mounted on the shaft); speed range is adjustable via external frequency converter (no longer available) (for one of the two agitators, this speed range is 25 – 126 rpm); partial technical documentation for the agitators available
Top head wall thickness: 7.9 mm

Bu ilan otomatik olarak tercüme edildiğinden bazı çeviri hataları oluşmuş olabilir.