Dikey işleme merkezi

Hartford HCMC1682

Hartford HCMC 1682 – Heidenhain TNC640, used – Year of manufacture 2021 – low hours!

Hartford vertical CNC machining center equipped with Heidenhain TNC640 control, large-dimension precision box ways on X, Y, and Z axes, traversable clamping table, and powerful main spindle with SK50 tool taper, closed-loop spindle cooling, automatic two-stage gearbox, spindle speed n = 10–6,000 rpm, max. power Pmax = 38 kW, max. torque Mmax = 979 Nm, 32-position tool magazine with quick-change arm, and ergonomically designed work area enclosure with electronically monitored front sliding doors fitted with viewing panels. Tool magazine can also be loaded/unloaded from the rear.

Spindle:
SK50, 38 kW, max. 979 Nm / max. 6,000 rpm
Air cooling via compressed air nozzle at the spindle nose, air cooling programmable via M-function.

Work Area:
X-axis (longitudinal): 1,600 mm
Psdpfsy I Uzrex Abnegl
Y-axis (cross): 820 mm
Z-axis (vertical): 660 mm

Clamping Table Dimensions: 1,750 x 820 mm
Max. Table Load: 2,200 kg
T-slots: 5
T-slot spacing: 150 mm
T-slot dimensions: 18 mm

Tool Magazine:
32 positions
Max. tool diameter: Ø 125 mm
Max. tool length: 350 mm
Max. tool weight: 20 kg

Cooling System:
Coolant Emulsion:
Nozzles for external coolant supply are installed at the spindle nose of the vertical saddle.
The coolant circulates through the transverse and longitudinal conveyors back into the coolant tank, from which it is pumped through the nozzles as needed (via M-function or switch on the control panel). Mechanical screens in the coolant tank provide coolant filtration.
Optional:
For internal coolant supply (ICS), a high-pressure pump with a basic filter system is provided. When ICS is activated, coolant is pumped from the tank through the high-pressure pump and filter system.

Electronic handwheel
Oil skimmer in coolant system
Blow-off and rinsing pistols
Chip conveyor
Wireless 3D probe (Renishaw) for workpiece measurement
Automatic tool breakage control (Renishaw)

The machine was only used for a single contract. As this contract no longer exists, the machine is now surplus to requirements.
This is a highly robust machine with high spindle power—ideal for heavy-duty machining.
The machine can be inspected under power at its current location.

Note: The clamping devices visible in the photos are not included in the scope of delivery!

Price: ex works

On request, removal, transport, and commissioning can be offered!

Bu ilan otomatik olarak tercüme edildiğinden bazı çeviri hataları oluşmuş olabilir.