Birleştirme ile kenar bantlama makinesi

Hebrock AKV 3005 DK - F Airtronic

Durumu: kullanılmış, Üretim yılı: 2014, with jointing milling unit including DIA tools, jointing thickness up to 40 mm, workpiece thickness up to 3 mm, combined milling station radius R 2.5 mm Technical description: - Hot-melt glue application to the workpiece for edging material up to 3 mm - 60 mm workpiece thickness without jointing unit, 40 mm workpiece thickness with jointing unit - Maintenance-free, coated glue pot - HF end-trimming station (16,000 rpm) for front and rear edge excess - HF milling station (16,000 rpm) with replaceable insert tool (combined version) and fine adjustment accessible from the operator side - Free spaces for additional processing units (Hebrock system) - Feed speed approx. 10 m/min - Adjustable cutting depth for trimming saw - Signal lamp for sequential workpiece feed - Robust chain drive - Ergonomically positioned operator panel - Double roller top pressure beam - Aggregate viewing windows accessible from the rear and operator side - PLC control system including touchscreen Technical Data: - Feed speed 10 m/min - Panel thickness 8 – 40 mm - Weight: depending on equipment approx. 1400 kg - Dimensions (L x W x H): 5000 x 1445 x 1600 mm Airtronic for machines up to 8 mm edge thickness, 1 pc Technical Data: - Edge thickness 1.2 mm – 3.0 mm possible - Maximum panel thickness 25 mm - Feed speed 7–10 m/min depending on edge material - Ready for operation in 3 min - Air consumption approx. 800 l/min for the complete machine - Power supply max. 32 A / 16 kW for complete machine; higher power connection required for machines with groove saw - Extraction as before - PLC control mandatory Upgrade to 8 mm edge thickness, 1 pc, up to max. 40 mm workpiece thickness Including: - Pneumatic saw adjustment - Separate pneumatic milling adjustment (1 pc) controllable from the operator panel (straight/radius) - Buffing station (1 pc) - Corner rounding cutter (1 pc) incl. combined tooling and pneumatic setting for chamfer/radius, max. workpiece thickness 40 mm - Minimum workpiece length 300 mm - Radius R 2.0 mm - Radius scraper blade (1 pc) incl. pneumatic lift device, radius R 2.0 mm - Flat scraper blade (1 pc) with pneumatic activation - Glue pot quick-change system in preparation (1 pc), without second glue pot, including capability for processing PU adhesives with the machine, without adhesive outlet device downward - Special cleaning system PU adhesive run-off downwards (1 pc) 60 mm panel thickness for machine with jointing unit (1 pc) - Maximum workpiece thickness with jointing unit: 60 mm - Jointing thickness at 40 mm – 60 mm workpiece thickness up to 2 mm Special infeed fence for overlaid panels: 1 pc, 16 mm and 19 mm thickness, max. excess overlay 8 mm Separate extraction for jointing unit: 1 pc, directly on jointing unit, vertical upwards, d=80 mm for optimal suction, strongly recommended from model AKV 3005 DK-F onward Ball bearing for corner rounding cutter 24.1 mm (1 pc) Ball bearing for corner rounding cutter 24.2 mm (1 pc) Nesting for combined milling unit (1 pc) - For processing workpieces with cup hinge borings, possible only on workpiece underside Ledpfxeyfp N De Aa Iorh Nesting for radius scraper blade unit (1 pc) - For processing workpieces with cup hinge borings, possible only on workpiece underside Separating agent spray device (1 pc) Cleaning agent spray device (1 pc): for easier removal of glue residues Antistatic spray device (1 pc): mandatory for airtronic; antistatic coolant is sprayed on the inside edges of the excess before the combined milling sta

Durumu: mükemmel (kullanılmış), Üretim yılı: 2018, Fonksiyonellik: tamamen fonksiyonel, Sintra HD Yazılımı ile Akıllı Dokunmatik Sayısal Kontrol Panel yüksekliği mm 10 – 60 Katı 22mm PVC/ABS mm3 Besleme hızı 25 m/dak'ya kadar Çalışma yüksekliği C.N. tarafından elektronik olarak ayarlanabilir. Panel destek kılavuzu C.N. tarafından motorlu ve elektronik olarak ayarlanabilir. Yapışmaz grup C.N. tarafından 2 adet elektronik ayarlanabilir motorlu doğrultucu grubu 1 pozisyonlu makara tutucu plaka EVA sıcak eriyen tutkal için tutkal kabıyla yapıştırma ünitesi Bıçakların her hareketini takip eden dinamik emiş sistemine sahip 2 motorlu uç kesme ünitesi. C.N. tarafından elektronik olarak ayarlanabilen 2 motorlu kademeli kesme/köşe alma grubu. Yapışmazlık grubu 2 adet çok fonksiyonlu motorlu yuvarlama ünitesi (köşeleme aleti + yuvarlama aleti) C.N. tarafından üretilen elektronik olarak ayarlanabilir kenar kazıyıcı grubu. Ljdpjwlbxlefx Aa Ijrh Tutkal kazıyıcı grubu Fırça grubu “SP-501” Winner 4A köprü boşaltma ile otomatik parça iade sistemi

Durumu: kullanılmış, Üretim yılı: 2008, Used machine Year of manufacture: 2008 Lodpfjxdpm Sox Aa Ijrh Equipment and technical specifications: - Round pot glue applicator - Feed unit with automatic edge band magazine - Pressure zone with multiple pressure rollers - End trimming: 2 motorized saw units for front and rear trimming - Top/bottom milling units: 2 milling units with copy rollers for radius or chamfer - Radius scraper: pneumatically controlled, for post-processing of radii - Surface scraper: for smoothing edge surfaces - Buffing unit: 2 polishing wheels with motors for final finishing - Riepe spray system - Control: PLC with control panel - Feed inverter replaced by Ott in 2022 - Feed speed approx. 10–12 m/min - Workpiece thickness up to 52 mm - Edge thickness 0.3–12 mm - Power supply 3x 400 V AC, 50 Hz - Rated power 12.7 kW - Rated current 30.5 A - Control voltage 24 V DC - Max. fuse protection 35 A (5x 6 mm² connection cable) Machine dimensions: approx. 6120x840x1385 mm Machine weight: approx. 3,000 kg Availability: short notice Location: Bavaria

Durumu: kullanılmış, Holz Her STREAMER 1057 XL FÜ + PU Edge thickness: 0.4 - 6 mm Modern control system with selector switch for aggregate adjustment Fully automatic edge magazine for rolls and strip material GLU-JET adhesive application unit: cartridges + PU bonding Adhesive application via nozzle technology Sensing nozzle Workpiece height: 6-60 mm Automatic glue height adjustment High-quality 3-roller pressure unit, 1 roller motorized Pneumatic end trimming unit for rolls and strips up to 6 mm edge thickness With pneumatic switching for 0-10° mitre cut of the trimming saws Milling unit: flush trimming up to 6 mm, radii milling, bevel milling up to 15° Corner copying unit: for 3 mm edge thickness Scraper unit for bevels and radii, with 2 scraper holders Flat scraper unit for finishing Buffing unit Spraying unit in infeed and outfeed area as well as for PU Machine equipped with all processing tools WORKSHOP-TESTED machine First delivery: 2016 Available ex stock Lieboch Lrodpjx Ux U Aefx Aa Ijh

Durumu: yeni, Üretim yılı: 2021, Fonksiyonellik: tamamen fonksiyonel, Συγκολλητική μηχανή ακμών Hebrock K36 με σύστημα ελέγχου PLC, δοχείο ταχείας θέρμανσης με επικάλυψη και χωρίς συντήρηση, προρυθμισμένο για γρήγορη αντικατάσταση του δοχείου. - Οθόνη αφής 10” - Μέγιστο πάχος ακμής 3mm - Ελάχιστο μήκος τεμαχίου 200mm - Ελάχιστο πλάτος τεμαχίου 80mm - Ταχύτητα προώθησης 10m/λεπτό - Έτοιμη για λειτουργία σε περίπου 5 λεπτά - Μέγιστη κατανάλωση ισχύος 14kW - Ηλεκτρική σύνδεση 400V/3ph/50Hz - Διαστάσεις μηχανήματος 5250x1230x1430 mm - Βάρος περίπου 1700Kg Επιπλέον εξοπλισμός: • Προφρεζαδόρος Whispercut, ύψος τεμαχίου 60mm • Θερμαινόμενος φράχτης εισαγωγής • Ακτίνα για στρογγύλεμα γωνίας R = 2mm • Διάταξη ταχείας αλλαγής για τον κινητήρα του corner rounder • Ξέστρα πολλαπλών ακτίνων R2/R1 • Στρογγύλεμα γωνιών για ύψος τεμαχίου 60mm • Μονάδα ψεκασμού διαχωριστικού υγρού • Μονάδα ψεκασμού καθαριστικού υγρού • Προστατευτικό ψεκασμού για τις ακμές • Λειτουργία nesting • Πνευματική ρύθμιση 3 σημείων Lsdjwyu E Ujpfx Aa Ijrh • Πολυεργαλείο (R2/R1/φαλτσοκόπτης) • Εσωτερικός φωτισμός LED • Εξοπλισμός για κοντά τεμάχια • Προετοιμασία για σύστημα επιστροφής (barbaric) • Πακέτο αξόνων / μηχανοκίνητες ρυθμίσεις ύψους, ακμής και προφρεζαρίσματος • Πρόσθετη υποστήριξη εισαγωγής και εξαγωγής τεμαχίων (450 mm έκαστη)

Durumu: kullanılmış, Holz Her STREAMER 1057 FÜ + PU Edge thickness: 0.4 - 6 mm Modern control system with selector switch for adjusting the units Pre-milling unit for precise trimming before the gluing unit Fully automatic edge magazine for both coil and strip material GLU-JET adhesive application station: cartridges + PU bonding Adhesive application via nozzle technology Workpiece height: 6-60 mm Automatic adhesive height adjustment High-quality 3-roller pressure unit, 1st roller powered Pneumatic end trimming unit for coil and strip material up to 6 mm edge thickness Pneumatic adjustment for end saw inclination from 0-10° Milling unit: flush milling up to 6 mm, radius milling, bevel milling at 15° Corner copying unit for up to 3 mm edge thickness Lrjdpfxoyg H His Aa Ijh Scraper unit for chamfer and radius profiling with 2 scraper blade holders Flat scraper unit - finishing Spraying device - PU Machine supplied with all processing units/tools Machine is WORKSHOP TESTED and in TOP CONDITION Available from stock in Lieboch

Durumu: kullanılmış, Üretim yılı: 2009, Fonksiyonellik: tamamen fonksiyonel, Kalmijer KGM Bisküvi Makinesi 2 bisküvi silindiri: Spekulatius ve Kipfel ile 10 adet fırın tepsisi dahil. Makine revizyondan geçirilmiştir. Lredpsw T Rxcsfx Aa Ieh Paslanmaz çelik alt şase tekerlekli. Silindirler için ısıtma bulunmakta. Tepsi genişliği: 25 cm, uzunluk: 1 m, 80 cm ve 60 cm. 16A bağlantı. Ek sorularınız için lütfen iletişime geçiniz. Şimdiden çok teşekkürler!

Durumu: mükemmel (kullanılmış), Üretim yılı: 2012, makine/araç numarası: 2459, Fonksiyonellik: tamamen fonksiyonel, Makine çok iyi durumda - Çok kullanıcı dostu kontrol paneli - İş parçası genişliği min. yaklaşık 80 mm - İş parçası uzunluğu min. yaklaşık 200 mm - İlerleme hızı yaklaşık 10 m/dak - Sabit vidalanmış özel zincir levhalara sahip taşıma zinciri - Çift silindirli üst baskı Ljdpfx Aajx Ahmuo Isrh - Makine uzunluğu 4300 mm - Makine genişliği 1400 mm - Ağırlık yaklaşık 1250 kg - Ön tarafta çıkarılabilir iş parçası sehpası - Otomatik merkezi yağlama kılavuz kesici ve köşe freze için - Teflon kaplı sıcak tutkal tankı (çok az bakım gerektirir) - Çalışmaya hazır olma süresi yaklaşık 5 - 6 dakika - Yapıştırma ünitesi - Pnömatik rulo kesici - İş parçasına doğrudan tutkal uygulama - Ön ve arka kenar için kesme ünitesi - Düz/köşe/faseta/radyus freze ünitesi - Köşe yuvarlatma - Çift algılamalı yüzey kazıyıcı bıçak

Durumu: kullanılmış, Üretim yılı: 2018, Edge banding machine AKV 3006 DK-F with jointing milling unit, including DIA tools Jointing thickness up to 40 mm, workpiece thickness up to 3 mm Combined milling station with R 2.5 mm radius Technical description: with hot melt adhesive application to the workpiece for edge material up to 3 mm, 60 mm workpiece thickness without jointing unit, 40 mm workpiece thickness with jointing unit, maintenance-free, coated glue pot, HF crosscut station (16,000 rpm) for front and rear edge overhang, HF milling station (16,000 rpm) with interchangeable cutters (combined version) and fine adjustment of cutter from operator side, stations available for additional processing units (Hebrock system), feed rate approx. 10 m/min, adjustable cutting depth for crosscut saw, signal lamp for workpiece sequence, robust chain drive, ergonomically arranged control panel, double roller top pressure beam, inspection windows for units on machine rear and operator side, PLC control including touchscreen. Technical data: - Feed speed 10 m/min - Panel thickness from 8 - 40 mm - Weight: approx. 1,550 kg depending on equipment - Dimensions (L x W x H) 5,250 x 1,445 x 1,600 mm. Airtronic including cooling and antistatic spraying device 2014 1 pc. Hot air unit for creating the optical zero joint using special edge materials - including pneumatic glue pot positioning - including cooling and antistatic spraying device - including 2 additional edge channels with quick-change system - including special design corner rounding milling unit, max. workpiece thickness 60 mm and min. workpiece length 200 mm - exclusively for Hebrock edge banding machines of the 3000 series - retrofitting also possible later—extra charge on request Technical data: - max. panel thickness 40 mm - max. edge thickness 1.2 – 2.0 mm - 7 – 10 m/min feed speed - air consumption approx. 280 – 580 l/min (Airtronic only), electronically controlled - operational in approx. 2 min. Upgraded to 8 mm edge thickness 1 pc. up to max. 40 mm workpiece thickness including pneumatic saw adjustment, special version with minimum workpiece thickness of 8 mm 1 pc. 3-point pneumatic milling adjustment 1 pc. switching radius – chamfer – flush for combined milling stations, eliminating manual changeover at the combined milling station for the 3rd stop point. PLC control mandatory. Buffing station 1 pc. Corner rounding unit 1 pc. incl. combination tool and pneumatic adjustment for chamfer/radius, max. workpiece thickness 40 mm, min. workpiece length 300 mm, radius R 2.0 mm. Radius scraper 1 pc. incl. pneumatic lift-off device, radius R 2.0 mm. Surface scraper 1 pc. with pneumatic engagement control. Complete chassis 1 pc. Glue pot change system incl. glue drainage device downward in preparation 1 pc. without 2nd glue pot – including option for PU glue processing. Grooving saw unit vertical into the panel 1 pc. including pneumatic lift-off device, vertical groove, groove width 8.2 mm, groove depth 8.0 mm, distance from workpiece edge 14.0 mm. Special version grooving saw motor with higher output 1 pc. Internal extraction for jointing unit 1 pc. at the extraction distributor of the machine. Ball bearing for corner rounding cutter 24.1 mm 1 pc. Ball bearing for corner rounding cutter 24.2 mm 1 pc. Protective agent spraying device 1 pc. on the edge surface for sensitive edge materials. Spraying device for panel combined 1 pc. (release agent and cleaning agent spraying device). Location: Supplier Ljdsx S Hmzopfx Aa Iorh

Durumu: mükemmel (kullanılmış), Hebrock F4 Edge Bander Well-equipped, available for inspection prior to purchase. PRE-MILLING cutters, glue application by roller, glue discharge system, Interchangeable glue pot, pneumatic pre-cut guillotine, pressure rollers, Cut-off saw for finishing, upper-lower milling unit, pneumatically adjustable R1 – R2, Profile scraper, pneumatically adjustable corner rounding unit, Flat scraper, nesting package included. Max workpiece height: 45mm, Max edge thickness in roll: 3mm, Feed speed: 7 m/min, Power requirement: 7.4KW. Machine tested, ready for demonstration, in very good condition. Lrsdsxq A Ebepfx Aa Ijh Only 15,000 meters of usage.