Kenar bantlama makinesi

Hebrock AKV 3006 DK-F

AKV 3006 DK-F – 1 unit Edge Banding Machine AKV 3005 DK-F with jointing milling unit including DIA tools. Jointing thickness up to 40 mm, workpiece thickness up to 3 mm. Combination milling station for radius R 2.5 mm.

Technical Description:
- Hot-melt adhesive application on workpiece for edge material up to 3 mm
- 60 mm workpiece thickness without jointing unit, 40 mm with jointing unit
- Maintenance-free, coated glue pot
- HF trimming station (16,000 rpm) for front and rear edge overhang
- HF milling station (16,000 rpm) with indexable insert cutter (combination design) and fine adjustment for cutter from operator side
- Free slots for additional processing units (Hebrock system)
- Feed rate approx. 10 m/min
- Cutting depth adjustment for cross-cut saw
Dkedpsxl Rmcofx Abpsu
- Signal lamp for workpiece sequence
- Robust chain drive
- Ergonomically arranged operator's panel
- Double roller top pressure beam
- Aggregate inspection windows from machine rear and operator side
- PLC control including touchscreen

Technical Data:
- Feed speed 10 m/min
- Panel thickness from 8 – 40 mm
- Weight: approx. 1550 kg depending on equipment
- Dimensions (L x W x H): 5250 x 1445 x 1600 mm

Airtronic
Including cooling and anti-static spray device (2014)
- 1 hot air unit for producing optical zero joint, using special designated edge materials
- Including pneumatic glue pot positioning
- Including cooling and anti-static spray device
- Including 2 additional edge channels in quick-change design
- Including special corner rounding unit, max. workpiece thickness 60 mm, min. length 200 mm
- Exclusively for Hebrock edge banding machines of the 3000 series
- Retrofit possible later – extra costs on request
- Technical Data:
- Max. panel thickness 40 mm
- Max. edge thickness 1.2 – 2.0 mm
- Feed speed: 7 – 10 m/min
- Air consumption approx. 280 – 580 l/min (Airtronic only), electronically controlled
- Ready for operation after approx. 2 minutes

Special version: minimum workpiece thickness 8 mm

1 Airtronic retrofit for PLC machines on request
1 Retrofit only possible at the Hüllhorst-Oberbauerschaft plant

Upgrade to 8 mm edge thickness
1 unit for workpiece thickness max. 40 mm
Including pneumatic saw adjustment

Special infeed fence for overlaid panels
1 unit for 16 mm and 19 mm thickness
Maximum overlay of coating: 8 mm

Separate pneumatic cutter adjustment
1 unit, controllable from the operator‘s panel (straight/radius)

Buffing station (polishing mop)
1 unit

Corner rounding unit
1 unit incl. combination tool and pneumatic adjustment for bevel/radius, max. workpiece thickness 40 mm, min. workpiece length 300 mm, radius R 2.0 mm

Ball bearings for corner rounding cutters 24.1 mm (1 unit) and 24.2 mm (1 unit)
Corner rounding unit for 60 mm workpiece thickness (1 unit)
Quick-change system for corner rounding unit (1 unit)
Change-over motor 0.37 kW for corner rounding unit (1 unit)
Including terminal box with pre-installed electrical connection, two pneumatic quick couplings, motor plate, and short-stroke cylinder
Alternatively Siko counter, incl. cutter R 1.0 mm, ball bearing 24.1 mm for corner rounding unit (1 unit), ball bearing 24.2 mm (1 unit)

Radius scrapers
- 1 unit incl. pneumatic lift device, radius R 2.0 mm
- 1 unit incl. pneumatic lift device, radius R 1.0 mm

Flat scraper
- 1 unit with pneumatic engagement control

Glue station change system including glue discharge device downwards (in preparation), 1 unit (without 2nd glue pot) – incl. possibility of using

Bu ilan otomatik olarak tercüme edildiğinden bazı çeviri hataları oluşmuş olabilir.