Kapama makinesi

HEBROCK TOP 3005 F

Our reliable edge banding machine, purchased new in 2016, is for sale due to the acquisition of a new machine. The machine operated in an 8-person carpentry workshop. It underwent a complete overhaul in January 2025. New radius scrapers, new milling tools, and new polishing wheels were installed. The pre-milling unit was sharpened. The coupling of the glue roller was replaced. The glue pot has been completely refurbished and cleaned.

The machine is suitable for both EVA granulate (e.g. Henkel Dorus KS351) and PUR adhesive application.

Pre-milling depth, edge banding material thickness, and the position of the top and bottom milling tools can be conveniently adjusted with handwheels located outside the machine housing.

The control system allows for saving custom edge banding programs.

For edge banding between 0.4 and 2.0 mm, pneumatic switching is possible directly from the program.

Main parameters:

- Power: 13.8 kW / 32 A / 400 V
- Compressed air: 7 bar (100–150 l/min)
- Touchscreen
- Saved edge banding programs
- Feed speed: 10 m/min
- Coil edge material thickness: 0.5–3.0 mm
- Workpiece thickness: 8–60 mm (can edge band workpieces up to 60 mm thick)
- Minimum workpiece width: 70 mm
- Minimum workpiece length: 180 mm (end trim saw) / 220 mm (end rounding)
- Processing units:
- Diamond pre-milling unit (12,000 rpm)
Dcsdpfx Aexlr S Hobvjn
- Release agent liquid tank/nozzle
- Glue application unit
- End trimming saw
- R2 milling unit
- R2 radius scraper
- Corner rounding unit
- Cleaning liquid tank/nozzle
- Flat scraper
- Polishing wheel

Bu ilan otomatik olarak tercüme edildiğinden bazı çeviri hataları oluşmuş olabilir.