V4A malzemeden, 8.550 litrelik, buharla ısıtılan reaktör, çapa karıştırıcı ileHeinrich Nowak
9928
V4A malzemeden, 8.550 litrelik, buharla ısıtılan reaktör, çapa karıştırıcı ile
Heinrich Nowak
9928
sabit fiyat KDV hariç
€22.000
Durumu
Kullanılmış
Konum
Bremen 

Resimleri göster
Haritayı göster
Makineye ait bilgiler
Fiyat ve Konum
sabit fiyat KDV hariç
€22.000
- Konum:
- Bremen

Ara
Teknik detaylar
- Depo kapasitesi:
- 8.550 l
Teklif detayları
- Listeleme kimliği:
- A203-49150
- Referans no.:
- 9928
- Son güncelleme tarihi:
- 05.12.2025
Açıklama
GENERAL
Equipment: Lifting lugs
Design: Suspended
Remarks: Feet made of Fe; flanges partially made of Fe
Speed: 8.5 - 51 rpm
Inner diameter: 2,000 mm
Explosion-proof: Motor is explosion-proof (compliance with applicable ATEX directives under local conditions must be verified)
Total height: 5,200 mm
Heating/Cooling: available
Power: 15 kW
Max. permissible operating temperature: 200 °C
Max. permissible operating overpressure: 6.0 bar
Max. overpressure: 3.2 bar
RW Seal: Mechanical seal with thermosiphon vessel
Agitator: Anchor agitator
Base type: Feet
Location: Bremen
Technical documentation: Drawing, TÜV certificates
Cylinder temperature control: Half-pipe coil
Nameplate:
Vacuum: 1.0 bar
Volume: 8,550 liters
Jacket volume: 160.0 liters
Cylinder wall thickness: 8 mm
Product-contact material: V4A 1.4571 (AISI316)
Condition: used
Cylindrical height: 2,200 mm
Last application: Pharmaceutical chemicals
VESSEL
Max. permissible operating temperature: 200 °C
HEATING/COOLING JACKET
Temperature control bottom plate: Half-pipe coil
EQUIPMENT
Manhole / Dome: in the top head (DN 500)
Outlet: Flange DN150
MATERIAL SPECIFICATION
Temperature control system material: AISI 304 (V2A) 1.4306
AGITATOR 1
Agitator manufacturer: Ekato
Voltage: 380 Volt
Disruptor:
TECHNICAL DATA / MEASUREMENTS
Bottom plate wall thickness: 8 mm
Agitator arrangement: centered in the top head
Agitator equipment: Drive was controlled by external frequency inverter by previous owner (no longer present)
Dodpfxoxqah Ts Acwocr
Top head wall thickness: 10 mm
Bu ilan otomatik olarak tercüme edildiğinden bazı çeviri hataları oluşmuş olabilir.
Equipment: Lifting lugs
Design: Suspended
Remarks: Feet made of Fe; flanges partially made of Fe
Speed: 8.5 - 51 rpm
Inner diameter: 2,000 mm
Explosion-proof: Motor is explosion-proof (compliance with applicable ATEX directives under local conditions must be verified)
Total height: 5,200 mm
Heating/Cooling: available
Power: 15 kW
Max. permissible operating temperature: 200 °C
Max. permissible operating overpressure: 6.0 bar
Max. overpressure: 3.2 bar
RW Seal: Mechanical seal with thermosiphon vessel
Agitator: Anchor agitator
Base type: Feet
Location: Bremen
Technical documentation: Drawing, TÜV certificates
Cylinder temperature control: Half-pipe coil
Nameplate:
Vacuum: 1.0 bar
Volume: 8,550 liters
Jacket volume: 160.0 liters
Cylinder wall thickness: 8 mm
Product-contact material: V4A 1.4571 (AISI316)
Condition: used
Cylindrical height: 2,200 mm
Last application: Pharmaceutical chemicals
VESSEL
Max. permissible operating temperature: 200 °C
HEATING/COOLING JACKET
Temperature control bottom plate: Half-pipe coil
EQUIPMENT
Manhole / Dome: in the top head (DN 500)
Outlet: Flange DN150
MATERIAL SPECIFICATION
Temperature control system material: AISI 304 (V2A) 1.4306
AGITATOR 1
Agitator manufacturer: Ekato
Voltage: 380 Volt
Disruptor:
TECHNICAL DATA / MEASUREMENTS
Bottom plate wall thickness: 8 mm
Agitator arrangement: centered in the top head
Agitator equipment: Drive was controlled by external frequency inverter by previous owner (no longer present)
Dodpfxoxqah Ts Acwocr
Top head wall thickness: 10 mm
Bu ilan otomatik olarak tercüme edildiğinden bazı çeviri hataları oluşmuş olabilir.
Tedarikçi
Not: Ücretsiz kaydolun veya giriş yapın, tüm bilgilere erişmek için.
İlk kayıt tarihi: 2019
İstek gönder
Telefon & Faks
+49 421 5... ilanlar
İlanınız başarıyla silindi
Bir hata oluştu































