Isı presi, çerçeve presi

Hidrobrasil 160T Vulkanisierpresse

Pressure: 160 t
Clear opening height: 700 mm
Stroke: 400 mm
Retraction force: 16 t
Motor power: 15 kW
Travel path: 400 mm
Ram plate: 700 x 600 mm
Table height above floor: 850 mm
Table plate: 700 x 600 mm
Approach speed: 10 mm/sec
Pressing speed: 10 mm/sec
Rapid traverse speed: 10 mm/sec
Oil cooling (electric): 1.5 kW (max)
Oil tank: 300 l
Machine weight approx.: 4.2 t
Dimensions L x W x H: 950 x 2440 x 2400 mm
Ejector: 30 x 30 mm
Gedpfefxyh Rox Afmobh
Ejector stroke: 150 mm
Ejector force: 15 t
Ejector speed: 25 mm/sec
Number of ejector pins: 1 piece
Heating plates (L x W): 550 x 500 mm
Light curtains front and rear: 6800
Double door with rear monitoring: 2400
Side door right with monitoring: 1200
Side door left with monitoring: 1200

The heating plates measure 550 x 500 mm, electrically heated up to 200°C and thermally insulated from the machine body.
The heating plates are equipped with 12 mm T-slots according to DIN 650; slot design according to customer specifications.
With two temperature sensors each for precise temperature control within the 500 x 450 mm area, accuracy ±3°C.
Pressing force is set using a rotary switch in 10 increments.
Return speed is 25 mm/sec.
The two-hand control is rotatably and swivelingly mounted to the machine body.
Internal workspace illumination.
Heating time can be freely set. Heating capacity approx. 12 kW.
Target temperature can be freely set.
The upper and lower heating plates can be controlled independently.
Upon completion of the heating time, a signal sounds and, if desired, the press opens automatically.
The heating plates are supplied by the German manufacturer ELKOM.

Bu ilan otomatik olarak tercüme edildiğinden bazı çeviri hataları oluşmuş olabilir.