Bant hattı - Açıcı ve doğrultma makinesi, rulo malzeme için açıcı, sac doğrultma makinesi, bant doğr

HMS 450 x 6

Strip Processing Line – Decoiler and Straightening Machine
Year of manufacture: 1991
Strip width: 50 to 450 mm
Sheet thickness with straightener inactive: 6 mm
Sheet thickness with straightener active: 2 mm
– Excellent equipment and introduction aids
Overall system footprint (L x W): approx. 7000 x 3000 mm
Total system weight: approx. 11 tons
Good condition

Straightening Machine HMS type RS 47-04/1, machine no.
Strip width, nominal: 400 mm
Strip width, max. clear opening: max. 455 mm
Strip thickness at 400 mm width: max. 1.5 mm (steel)
Strip thickness at 400 mm width: max. 2 mm (copper)
Speed: max. 40 m/min
Number of straightening rollers: 7 pcs
Straightening roller diameter: Ø 40 mm
Number of pull rollers: 2 pcs
Pull roller diameter: Ø 80 mm
Entry/exit height: 1500 mm
– Straightening rollers hardened, ground, and hard-chromed, with central support
– Pull rollers hardened, ground, hard-chromed, with hydraulic lifting
– Manual roll adjustment
– Entry aid with hydraulically extendable tongue and hydraulically adjustable deflector roller
– Lateral strip guidance adjustable
– All straightening rollers powered via distribution gearbox and cardan shafts
– Both pull rollers powered via gearbox and cardan shafts
– Frequency-controlled drive via geared motors
– Straightener opening stroke 250 mm for cleaning the line or running thicker material, lifting movement via trapezoidal lead screw
– Ultrasonic loop control
Shipping dimensions (L x W x H): 3600 x 2200 x 2200 mm
Net weight: approx. 4 tons

Decoiler HMS type BA 1.5-06/80, machine no.
Coil weight: max. 8000 kg
Outer coil diameter: max. 1600 mm (with loading carriage)
Outer coil diameter: max. 2000 mm (without loading carriage)
Coil support disc diameter: Ø 1700 mm
Coil inner diameter, clamping range: 460-520 mm
Coil width, nominal: max. 630 mm
Clamping jaw width: 750 mm
Hasp deck height above base plate: 1500 mm
– Drive of decoiler crown via hydraulic motor and gear wheel
– Pneumatic overrun brake on the decoiler crown TWINFLEX
– Hydraulic expansion of the decoiler crown centrally via wedge slider system
– Hydraulic hold-down arm with hydraulically driven double pendulum roller
– Coil loading carriage with 12 t lifting capacity and 300 mm stroke
– Decoiler on above-floor carriage with motorized cross-travel drive
Shipping dimensions (L x W x H): 3500 x 1900 x 2500 mm
Net weight: approx. 5 tons

Central hydraulic unit adjacent
Tank capacity: 350 liters
Kjdpfeif Sg Sjx Adpjww
Drive power: 18.5 kW
– Drive motor with 2 REXROTH pumps (tandem pump)
– Oil cooler as air heat exchanger with fan motor
Shipping dimensions (L x W x H): 1600 x 850 x 1450 mm
Net weight: approx. 800 kg

Electrical cabinet adjacent
– All cable connections via Harting connectors
Shipping dimensions (L x W x H): 2800 x 500 x 2250 mm
Net weight: approx. 800 kg

Bu ilan otomatik olarak tercüme edildiğinden bazı çeviri hataları oluşmuş olabilir.