Kenar bantlama makinesi

Holzher Sprint 1317

Durum: ikinci el, Holz Her Sprint 1317 Ağır hizmet tipi – Kenar kalınlığı 0,4 – 8 mm PLC ekranlı kontrol sistemi PLC aracılığıyla besleme hattı Yapıştırma işleminden önce kenara ekleme yapmak için ön frezeleme ünitesi Rulo ve şerit malzemeler için tamamen otomatik kenar deposu Yapıştırıcı uygulama istasyonu, kartuşlu + PU yapıştırma Nozul teknolojisiyle yapıştırıcı uygulaması Godpfezkr A Aex Amfjud İş parçasının yüksekliği 6-50 mm Yapıştırıcı yüksekliği ayarı Basınç ünitesi, pnömatik 1918 kesme ünitesi, rulo ve şerit malzemeler için, kenar kalınlığı 8 mm'ye kadar Pnömatik ayar ile 0-10° açıyla kesme testeresinin eğimi 1942 MOT2 frezeleme ünitesi, 8 mm düz frezeleme, radüs frezeleme - pah frezeleme - 15° Pahlar ve radüsler için çekme bıçağı ünitesi, 2 adet çekme bıçağı taşıyıcısı 1832 profil frezeleme ünitesi, kenar kalınlığı 3 mm'ye kadar olan köşelerin yuvarlatılması, sürekli işlem Pnömatik giriş ve çıkış Yüzey çekme bıçağı ünitesi – Son işlem Makine İŞLEVSEL VE İYİ DURUMDA Aracı olarak satılıyor, marangoz atölyesi/eğitmen Kullanılabilirlik: Temmuz 2026 ortası Depo çıkışı, ÖZEL FİYAT, NET € 8.500,00

Durum: işlem için hazır (kullanılmış), Üretim yılı: 2006, Holz Her Sprint 1317 Gsdpfszlwz Tox Amfeud ağır hizmet tipi – kenar kalınlığı 0,4 – 8 mm PLC ekranlı kontrol sistemi PLC üzerinden kontrollü besleme şeridi Yapıştırma işleminden önce kenarı hazırlamak için ön frezeleme ünitesi Rulo ve şerit malzemeler için tamamen otomatik kenar magazini Yapıştırıcı uygulama istasyonu: kartuşlar + PU yapıştırma Nozul teknolojisi ile yapıştırıcı uygulaması İş parçasının yüksekliği: 6-50 mm Yapıştırıcı yüksekliği ayarı Presleme ünitesi: pnömatik 1918 kesme ünitesi, rulo ve şerit malzemeler için, kenar kalınlığı 8 mm'ye kadar pnömatik ayar ile 0-10° açılı kesme 1942 MOT2 frezeleme ünitesi, düz frezeleme 8 mm, yuvarlak frezeleme – pah frezeleme – 15° Pah ve yuvarlak kenarlar için çekme bıçağı ünitesi, 2 adet çekme bıçağı tutucu 1832 şekil frezeleme ünitesi, kenar kalınlığı 3 mm'ye kadar köşeleri yuvarlama, sürekli işlem pnömatik giriş ve çıkış Yüzey çekme bıçağı ünitesi – son işlem Fiyat: 9500 Makine, Ağustos 2026'dan itibaren teslim edilebilir.

Durum: ikinci el, Üretim yılı: 2003, Used machine Year of manufacture: 2003 Features and technical data: - Control unit with LCD display - Swiveling control panel - Program memory - Manual pressure bridge adjustment - Feed via transport chain - Extendable workpiece support Jointing unit 1961: - 2 x 2.0 kW - Diamond jointing cutter for clockwise and counter-clockwise rotation Edge magazine 1903: - Support plate 820 mm, max. loading capacity 40 mm - Automatic feeding of coil and strip material Adhesive application system 1906: - Cartridge system with sensing nozzle - Automatic reloading - Can use PUR adhesives Pressure unit 1816: - With powered roller - Pneumatic control of pressure unit End trimming unit 1918: - 2 x 0.22 kW - Swivable from 0 to 10°, pneumatic adjustment Milling unit 1942 MOT 2: - For flush, radius and chamfer milling - Motorized adjustment - Air nozzle at milling unit Corner copying unit 1832: - Corner copying up to r = 3 mm, postforming up to r = 6 mm Radius scraper unit 1929 MOT 2: - For plastic edging up to 3 mm - Chip collection box for radius scraper Surface scraper 1964: - Job-controlled surface scraper - Air nozzle at the surface scraper Buffing unit 1940 Edge thickness (coil): 3 mm Edge thickness (strip): 5 mm Maximum edge thickness for corner copying: 3 mm Workpiece thickness: 6-45 mm Workpiece thickness for corner copying: 45 mm Minimum workpiece length: 180 mm Feed speed: 8 m/min Distance between workpiece supports: 470 mm Support plate diameter for edge material: 800 mm End trimming blade for coil material up to: 3 mm Heat-up time: 3.5 min Jointing cutter power: 2 x 2 kW End trimmer power: 2 x 0.22 kW Milling station power: 2 x 0.6 kW Corner copying power: 0.22 kW Extraction nozzle (jointing unit): 120 mm Extraction nozzle (milling unit): 70 mm Extraction nozzle (scraper unit): 70 mm Gujdpfx Aozk Nwwjmfsd Dimensions: 5,350 x 1,669 x 1,940 mm Weight: 1,200 kg Location: Röllbach Availability: short notice

Durum: ikinci el, Üretim yılı: 2008, Used machine Year of manufacture: 2008 Edge Control control system with 18.5" touchscreen color display 16:9 swiveling control panel, program memory, motorized pressure bridge adjustment, feed via transport chain, feed rate: 8-18 m/min extendable workpiece support, motorized infeed fence adjustment Jointing unit 1961, diamond jointing cutter for both climb and conventional milling, automatic adjustment to workpiece height Edge feed 1903 pre-trimming up to 3 x 45 mm (depending on material) Glue application system 1905 multi-system automatic glue height adjustment with scanning nozzle, pressure regulator for controlling cartridge pressing pressure, PUR adhesive compatible, pressure station 1913 MOT, first roller driven end-trimming unit 1918 with pneumatic adjustment end saw, pneumatically swiveling, multifunction unit 1824 MOT 4 with multifunction cutter for radii 1, 2, 3 mm corner rounding unit 1832 corner rounding for edge thickness up to 3mm radius scraper 1929 MOT 2 with motorized horizontal tracing roller adjustment with separate pneumatic adjustment (top/bottom) Chip collector for radius scraper, flat scraper 1964 for removing glue residue to achieve a clean joint with extraction hoods spray device 1856 for infeed and outfeed areas Guedpsv Sv Ensfx Amfsd buffing unit 1940 for final cleaning and edge polishing ----- Technical Data ----- Edge thickness, roll material: 3 mm, Edge thickness, strip material: 8 mm, max. edge thickness for corner rounding: 3 mm, workpiece thickness: 45 mm, workpiece thickness for corner rounding: 45 mm, min. workpiece length: 180 mm, feed speed: 8-18 m/min, distance, workpiece support: 470 mm, support plate Ø for edge material: 800 mm, end trimming for roll material up to: 3 mm, heating time: 3.5 min, power, jointing cutter: 2 x 2 kW, power, end saw: 2 x 0.22 kW, power, milling station: 2 x 0.35 kW, power, corner rounding: 0.22 kW, extraction port, jointing unit: 120 mm, extraction port, milling unit: 70 mm, extraction port, scraper unit: 70 mm, total length: 5,350 mm, dimensions (LxWxH): 5,350 x 1,669 x 1,940 mm Image of operating hours is from a 2022 record Availability: short-term Location: Röllbach

Durum: ikinci el, Üretim yılı: 2003, Used machine Year of manufacture: 2003 Features and technical data: - Control unit with LCD display - Swiveling control panel - Program memory - Manual pressure bridge adjustment - Feed via transport chain - Extendable workpiece support Jointing unit 1961: - 2 x 2.0 kW - Diamond jointing cutter for clockwise and counter-clockwise rotation Edge magazine 1903: - Support plate 820 mm, max. loading capacity 40 mm - Automatic feeding of coil and strip material Adhesive application system 1906: - Cartridge system with sensing nozzle - Automatic reloading - Can use PUR adhesives Pressure unit 1816: - With powered roller - Pneumatic control of pressure unit End trimming unit 1918: - 2 x 0.22 kW - Swivable from 0 to 10°, pneumatic adjustment Milling unit 1942 MOT 2: - For flush, radius and chamfer milling - Motorized adjustment - Air nozzle at milling unit Corner copying unit 1832: - Corner copying up to r = 3 mm, postforming up to r = 6 mm Radius scraper unit 1929 MOT 2: - For plastic edging up to 3 mm - Chip collection box for radius scraper Surface scraper 1964: - Job-controlled surface scraper - Air nozzle at the surface scraper Buffing unit 1940 Edge thickness (coil): 3 mm Edge thickness (strip): 5 mm Guedpfx Amjwka Nyofsd Maximum edge thickness for corner copying: 3 mm Workpiece thickness: 6-45 mm Workpiece thickness for corner copying: 45 mm Minimum workpiece length: 180 mm Feed speed: 8 m/min Distance between workpiece supports: 470 mm Support plate diameter for edge material: 800 mm End trimming blade for coil material up to: 3 mm Heat-up time: 3.5 min Jointing cutter power: 2 x 2 kW End trimmer power: 2 x 0.22 kW Milling station power: 2 x 0.6 kW Corner copying power: 0.22 kW Extraction nozzle (jointing unit): 120 mm Extraction nozzle (milling unit): 70 mm Extraction nozzle (scraper unit): 70 mm Dimensions: 5,350 x 1,669 x 1,940 mm Weight: 1,200 kg Location: Röllbach Availability: short notice

Durum: ikinci el, Holzher Sprint 1317 edge bander pre-milling cutters glue application, glue cartridge pneumatic pre-cut guillotine pressure rollers trimming saws top and bottom milling units Gujdpsx Tf D Usfx Amfod corner rounding profile scraper flat scraper Max. edging height (mm): 50 Edgeband thickness in roll: 3mm feed speed: 10m/min The machine requires servicing as well as setup and adjustment. The machine can be switched on, all units power up, but the front saw does not respond to the material and the corner rounding unit needs adjustment.