Tek taraflı kenar bantlama makinesi

HOMAG KAL 370 AMBITION 2484

Used single-sided HOMAG edge banding machine for straight edges; suitable for joint trimming, edge banding, and post-processing of various edge materials. Fixed fence on the left side.
Year of manufacture: 2015

SPECIFICATION / EQUIPMENT:
Base machine with 80 mm wide transport chain as workpiece feed unit,
- Max. workpiece thickness: 60 mm
- Motorized height-adjustable top pressure unit
Gujdsy A I Sgepfx Ag Hoa
- Workpiece support with roller tracks
- Glue pot lift-off at feed stop
- Glue roller clamping before the trailing edge of the workpiece
- (Remote) manual control for easy machine setup
- Adjustable infeed fence via NC axis
- Joint-trimming unit, climb/counter rotation, 2 x 4kW, operation-controlled
Horizontal positioning via NC motor (CAN)
GLUE UNIT A20, consisting of:
- QA60 glue application unit, with PTFE coating (Teflon)
- Pre-melter for EVA adhesive
- Capable of processing both EVA and PUR adhesives
- Edge magazine for a minimum edge thickness of 0.4 mm and a maximum of 20 mm
- Pressure zone with automatic horizontal adjustment (NC controlled) to edge thickness, 1 driven and 6 non-driven pressure rollers
POST-PROCESSING SECTION:
- PK25 cross-cutting unit (horizontal), 2 motors each 0.8kW (front and rear edges), for chamfer/straight and overhanging cuts
- Pre-/flush trimming unit, 1.15 kW, top/bottom
- Fine trimming unit, top/bottom, with NC adjustment
- FK11 contour trimming unit (corner rounding), 2 motors (top/bottom)
- Controlled universal trimming unit
- Multiprofile scraper, top/bottom
- Flat scraper, top/bottom
- Buffing unit, top/bottom
CONTROL SYSTEM: PC 22

Bu ilan otomatik olarak tercüme edildiğinden bazı çeviri hataları oluşmuş olabilir.