Tek taraflı kenar bantlama makinesi

HOMAG KAL 370 AMBITION 2484

Used single-sided HOMAG edge banding machine for straight edges; for joint trimming, edge banding, and post-processing of various edge materials. Fixed stop on the left side.
Year of manufacture: 2015

SPECIFICATION / CONFIGURATION:
- Base machine with 80 mm wide transport chain as workpiece feed mechanism
- Maximum workpiece thickness: 60 mm
- Motorized height-adjustable top pressure
- Workpiece support with roller rails
- Glue pot lift-off when feed stops
Cgodpszina Iofx Acpsw
- Glue roller clamping before workpiece rear edge
- (Remote) hand control for easy setup of the machine
- Adjustable infeed fence via NC axis
- Joint trimming—climb/counter rotation, 2x4kW, controlled by usage
Horizontal positioning via NC motor (CAN bus)

EDGING UNIT A20, consisting of:
- QA60 glue application unit with PTFE (Teflon) coating
- Pre-melter for EVA adhesive
- Capable of processing both EVA and PUR adhesives
- Edge magazine, minimum 0.4 mm to maximum 20 mm edge thickness
- Pressure zone with automatic horizontal adjustment (NC) to edge thickness, 1 driven and 4 non-driven pressure rollers

POST-PROCESSING SECTION:
- PK25 cross-cut aggregate, horizontal, 2 motors of 0.8 kW each (front/rear edge)
Chamfer/straight and flush cutting
- Pre-/flush trimming unit 1.15 kW, top/bottom
- FK11 contour trimming unit (corner rounding), 2 motors (top/bottom) with motorized fine adjustment, controlled via operator panel; various exchangeable heads equipped with tools
- Universal milling unit 3.5 kW, controlled
- Multi-profile scraping blade top/bottom
- Flat scraper blade top/bottom
- Buffing unit top/bottom
CONTROL: PC 23 powerTouch
- woodCommander 5

Bu ilan otomatik olarak tercüme edildiğinden bazı çeviri hataları oluşmuş olabilir.