Balya presi

HSM GmbH + Co. KG VK 8818 R-FU

Good day,
Djdpfx Asyz Af Eoagour

We are pleased to offer you, without obligation, a pre-owned complete bale press line consisting of an HSM baler, type VK 8818 R-FU, including conveying equipment and wire tying stations.

The following technical data has been taken from the manufacturer's operating manuals and brochures. We cannot guarantee the accuracy or completeness of this information.

Technical Data Balepress:
Manufacturer: HSM GmbH + Co. KG, Germany
Type: VK 8818 R-FU
Year of manufacture: 2015
Operating hours: 20,331 hours (as of September 2025)
Number of bales produced: 29,020 bales (as of September 2025)
Main press force: 1,000 kN
Specific pressing force: 120 N/cm²
Cutting edge ejector press force: 121 kN
Feed hopper dimensions: 970 x 1,800 mm
Theoretical cycle time (idle): 8.3 seconds
Theoretical throughput: 643 m³/hour
Bale dimensions: 1,100 x 750 mm (length adjustable from 600 up to 2,000 mm)
Drive power: 2 x 45 kW, frequency-controlled
Connected load: 110 kW
Total current consumption: 213 A
Fuse protection: 250 A slow-blow
Tying: 5-fold horizontal, fully automatic
Throughput:
Bulk density 20 kg/m³: 12.86 t/hour
Bulk density 50 kg/m³: 32.15 t/hour
Bale weights (approx. 1.2 m bale length): 650 to 750 kg/bale, depending on material
Hydraulic oil tank volume: 2,000 L HVI 46
PLC: Siemens S7-300
Control panel: Siemens TP 700
Press dimensions: 12,130 x 4,800 x 3,270 mm (L x W x H)
Installation dimensions with conveyors: 35,000 x 8,480 x 7,745 mm (L x W x H)
Press weight: approx. 33 t (main press approx. 12 t, press channel with bale gripper approx. 10 t)

Additional special equipment ordered:
Frequency-controlled main drive, 2 x 45 kW, with up to 40% energy savings compared to standard 2 x 45 kW motors with equal performance
Manual activation/deactivation of the number of wire windings to save tying wire for non-expansive material
Cutting edge ejector with 121 kN press force
Wire break and end sensor monitoring with automatic press shutdown
Bale slide
Visual warning signal mounted on the control cabinet

Condition of the press:
The complete press system (baler and conveyor technology) is in good, immediately operational condition, regularly cleaned, lubricated, and serviced weekly by the operator as per manufacturer's instructions.

Technical data for the chain belt conveyor:
Manufacturer: Stadler Anlagenbau GmbH
Type: Chain belt conveyor KF 1800
Year built: 2015
Belt speed: 0.36 m/second
Feed belt length: 7,000 mm
Incline belt length: 14,500 mm
Gooseneck length: 1,550 mm
Incline: 30°
Nominal width: 1,800 mm
Effective width: 1,638 mm
Total conveyor height: 7,745 mm
Pit dimensions for conveyor: 11,200 x 3,000 x 1,250 mm (L x W x H)

Scope of delivery:
- HSM VK 8818 R-FU baler
- Maintenance platform
- Bale chute
- Wire redirection stations
- Wire reel trolleys (without wire reels)
- Stadler KF 1800 chain belt conveyor
- Cross-running sliding belt conveyor
- Pit cover from feed conveyor to pit
- Second control cabinet for baler operation at the conveyor
- Machine documentation in English

Delivery time:
The entire plant is already dismantled, stored, and can be loaded at short notice upon receipt of payment.

We would be pleased if this or any of our other presses would be of interest to you.

Your service team
Mertens & Frowein GmbH

Bu ilan otomatik olarak tercüme edildiğinden bazı çeviri hataları oluşmuş olabilir.