NC freze makinesi

HURON HURÈ M 2006

Durum: mükemmel (kullanılmış), Üretim yılı: 2016, Fonksiyonellik: tamamen fonksiyonel, X ekseni hareket mesafesi: 4.000 mm, Y ekseni hareket mesafesi: 2.200 mm, Z ekseni hareket mesafesi: 1.100 mm, masa uzunluğu: 4.500 mm, masa genişliği: 2.500 mm, maksimum mil hızı: 22.000 dev/dak, CNC Heidenhain iTNC 640 WORKING AREA Travel X axis (longitudinal): 4,000 mm Travel Y axis (transversal): 2,200 mm Travel Z axis (vertical): 1,100 mm Maximum speed with interpolating axes: 50 m/min WORK TABLE Dimensions: 4,500 x 2,500 mm Height: 300 mm Load capacity: 15 t/m² T-slots for workpiece clamping: 28 mm, DIN 650 (H12), equipped with leveling devices. T-slot direction parallel to Y axis movement. Cgedpfx Aoyv In Iscpsw CONTINUOUSLY POSITIONED UNIVERSAL HEAD WITH SPINDLE HOLDER Automatic universal head with 360,000 indexing positions (increments of 0.001°). Rotational movement driven by direct drive motors and controlled by CNC as a positioning axis. Automatic tool clamping. Allows for an undercut of 10°. Internal cooling system for bearings and axis motors. C axis rotation range: +/- 270° A axis rotation range: +/- 185° Maximum rotation speed of axes: 30 rpm Maximum working torque on A/C axes: 450 Nm Axis clamping torque: 1,400 Nm Available spindle power (S1/S6): 22/33 kW Available spindle torque (S1/S6): 84/128 Nm Maximum spindle speed: 22,000 rpm Constant power speed range: 3,000 to 18,000 rpm Constant torque speed range: 10 to 3,000 rpm Tool holder: HSK – A63 DIN 69893 HSK – A100 ELECTROSPINDLE WITH SEMI-AUTOMATIC CHANGER: Available spindle power (S1/S6): 37/43 kW Available spindle torque (S1/S6): 140/165 Nm Maximum spindle speed: 15,000 rpm Constant power speed range: 2,500 to 12,000 rpm Constant torque speed range: 10 to 2,500 rpm Tool holder: HSK – A100 DIN 69893 55-STATION CHAIN TOOL MAGAZINE, HSK - A100 / HSK – A63: Fixed chain-type magazine located at the back of the machine, enclosed for operator protection, equipped with an arm for vertical tool change and automatic tool preparation. Fixed-position management. Axis clamping via hydraulic control. Total tools: 55 Tool type: HSK-A63 DIN 69893 Tools: 30 Maximum tool diameter: 90 mm Maximum tool diameter with adjacent positions free: 160 mm Maximum tool length: 300 mm Maximum tool weight: 10 kg Tool type: HSK-A100 DIN 69893 Tools: 25 Maximum tool diameter: 100 mm Maximum tool diameter with adjacent positions free: 160 mm Maximum tool length: 450 mm Maximum tool weight: 20 kg REQUIRED CONNECTIONS: Maximum installed power: 177 kVA Maximum required current: 235 A Machine is equipped with: • Heidenhain HR550 remote electronic handwheel • High pressure water and air through the spindle • Semi-automatic spindle change system, for both HSK – A63 and HSK – A100 adapters • Wide range of tooling included with the machine • Renishaw probe • BLUM laser presetting system • AUTOCAL automatic head calibration system • Visormax subscription for remote monitoring • Electrical cabinet air conditioning system • Axis and electrospindle cooling system • User and maintenance manual, and EC Declaration of Conformity

Durum: yeni, Üretim yılı: 2025, Ref.-No.: 10463 Manufacturer: IGREK Model: FR 3500 XL Year of manufacture: 2025 Control system: CNC control Controller: Siemens 840 D / Heidenhain iTNC 640 Location: Istanbul Country of origin: Türkiye X-axis travel: 6,500 mm Y-axis travel: 3,500 mm Z-axis travel: 1,400 mm A-axis: +/- 115° C-axis: 360° Spindle speed: 12,500 rpm Max. torque: 235 Nm Rapid traverse X/Y/Z: 30 m/min Table size (LxW): 2,290 – 6,490 x 3,580 mm Spindle drive power: 54 kW Max. table load: 4,000 kg Tool holder: HSK-A100 Machine length: 11,500 mm Machine width: 7,400 mm Machine height: 6,600 mm Weight: 120 t Additional information: IGREK FR 3500 XL – Precision and Performance at the Highest Level The IGREK FR 3500 XL is a state-of-the-art CNC-controlled 5-axis gantry milling machine (year of manufacture: 2024). Specifically developed for demanding machining of large workpieces, it impresses with its versatility and precision. Featuring the latest Siemens 840D or Heidenhain iTNC 640 control systems and robust construction, the machine offers ideal conditions for manufacturing in a wide range of industries. Main Features: Large machining areas: With travel paths of 6,500 mm (X), 3,500 mm (Y), and 1,400 mm (Z), the machine is ideal for processing large components. 5-axis simultaneous machining: The A-axis with a swivel range of +/- 115° and the C-axis with 360° rotation enable ultra-precise machining of complex geometries. Powerful spindle: The spindle achieves speeds of up to 12,500 rpm and maximum torque of 235 Nm—perfect for demanding milling applications. High stability: The machine weight of 120 tons and a table load capacity of up to 4,000 kg ensure vibration-free machining, even with heavy workpieces. Flexible tool holder: The HSK-A100 tool interface allows rapid tool changes and optimal process times. Rapid traverse speeds: 30 m/min in X, Y, and Z directions guarantee high productivity. Key technical specifications: Cgjdpfxsxmd Szs Acpjw Table size: 2,290 – 6,490 x 3,580 mm Spindle power: 54 kW Max. torque: 235 Nm Tool holder: HSK-A100 Machine dimensions (LxWxH): 11,500 x 7,400 x 6,600 mm Max. table load: 4,000 kg The IGREK FR 3500 XL sets new standards in large-part machining. Available immediately, it comes with comprehensive warranties and manufacturer-direct service, both internationally and across all regions. Use the latest technology for your production—contact us for further details!

Durum: iyi (kullanılmış), Üretim yılı: 2008, X ekseni hareket mesafesi: 4.230 mm, Y ekseni hareket mesafesi: 1.950 mm, Z ekseni hareket mesafesi: 750 mm, masa uzunluğu: 4.000 mm, masa genişliği: 1.250 mm, masa yükü: 11.000 kg, CNC Gantry Milling Machine KAO MING - KMC 4000 SV-H Double-guideway and flat guideway design Head changer for multi-side machining of large components Automatic tool changer for horizontal and vertical milling heads, swiveling Distance table to spindle nose: 213–1093 mm Distance table to spindle center: 130–… mm Horizontal head indexing: 5 degrees x 72 positions Heidenhain iTNC530 with HR410 handwheel Spindle torque: 1018 Nm, ISO 50 Universal milling head, type Huron X-axis travel: 4230 mm Y-axis travel: 1950 mm Z-axis travel: 750 mm Distance between columns: 1500 mm Table length: 4000 mm Table width: 1250 mm Table load capacity: 11,000 kg Feed rate X-axis: 12,000 mm/min Feed rate Y-axis: 15,000 mm/min Feed rate Z-axis: 12,000 mm/min Tool holder: 50ISO/BT/MT Spindle power: 26 kW Spindle speed: 4,400 rpm Tool changer capacity: 30 Chip conveyor: Yes Coolant system: Yes Length: 10,100 mm Width: 4,500 mm Height: 4,250 mm Weight: 30,000 kg Csdpfxexf E Twe Acpsgw Please note: The information on this page has been provided to the best of our knowledge and, where possible, obtained from the manufacturer. The information is given in good faith, but accuracy cannot be guaranteed. Accordingly, this does not constitute representation or contractual terms. We recommend checking all important details.

Durum: ikinci el, Fonksiyonellik: tamamen fonksiyonel, Üretim yılı: 2013, çalışma saatleri: 13.117 h, yük kapasitesi: 4.000 kg, yakıt türü: gaz, boş ağırlık: 6.000 kg, Linde H40T-02 satılık. İnceleme de mümkündür. Cgedpfxsxhgznj Acpjw

Durum: iyi (kullanılmış), Üretim yılı: 2002, Fonksiyonellik: tamamen fonksiyonel, İlk devreye alma: 2002 Kontrol ünitesi: Heidenhain iTNC530 Makine saatleri: bilgi gelecek X ekseni: yaklaşık 6.000 mm Codpfeyzz R Hsx Acpjgw Y ekseni: yaklaşık 3.500 mm Z ekseni: yaklaşık 1.100 mm A ekseni: C ekseni: 2 eksenli freze kafası Mil devir hızı: maks. 14.000 dev/dak Ek donanım - 2 taraflı muhafaza Makinenin durumu Tam çalışır durumda, çok iyi durumda. Makine halen enerjili ve hemen teslim edilebilir.

Durum: yeni gibi (kullanılmış), Üretim yılı: 2016, Fonksiyonellik: tamamen fonksiyonel, X ekseni hareket mesafesi: 7.000 mm, Y ekseni hareket mesafesi: 3.200 mm, Z ekseni hareket mesafesi: 1.500 mm, toplam uzunluk: 10.500 mm, masa uzunluğu: 6.000 mm, masa genişliği: 3.000 mm, toplam genişlik: 7.475 mm, mil hızı (dk.): 2.670 dev/dak, maksimum mil hızı: 18.000 dev/dak, toplam yükseklik: 5.380 mm, masa yüksekliği: 300 mm, HAREKETLİ KÖPRÜLÜ FREZE FPT INDUSTRIE DINOMAX 3 Cgodpfxsy Ta Tko Acpjw TEKNİK ÖZELLİKLER Marka: FPT Industrie Model: Dinomax 3 Yıl: 2016 CNC: Heidenhain TNC 640 Tabla: 6000 x 3000 mm X Ekseni Hareketi: 7000 mm Y Ekseni Hareketi: 3200 mm Z Ekseni Hareketi: 1500 mm 40 Takım Magazin (25 Konum ISO 50 / 15 Konum HSK A63) 3 Konumlu Kafa Pick-Up Magazin Dahili soğutma 20 Bar Soğutma sıvısı filtresi İşleme sırasında video izleme sistemi Autocal (Otomatik kalibrasyon yazılımı) MAPR (Ölçüm ve hizalama probu ISO 50) MRLUL (Lazer doğrulama probu)

Durum: ikinci el, Teknik detaylar: Masa çapı: 450 mm Csdpfxou N D Ays Acpsgw Masa dönüşü - manuel / mekanik: 360 ° Sıkıştırma tablası dönüşü: 90° mekanik derece Makine ağırlığı yaklaşık: 100 kg Boyutlar U: 800 x G: 700 x Y: 400 mm Döner tablanın yüzeyi kazınmıştır. Çok iyi durumda! mikrometre hassasiyetinde kilitleme 0,01 mm aralığında konumlandırma DIN 650'ye göre yayılan T yuvaları Ayak bağlama 16mm (6 delik) *

Durum: ikinci el, Üretim yılı: 2004, Technical details: X travel: 1500 mm Y travel: 1000 mm Z travel: 1000 mm Control for program: TNC 530 Spindle operating hours: not yet known h Milling spindle speed range: 1: 30 to 930 and 2: 930 to 4000 / stepless rpm Tool holder: horizontal/vertical: SK 50 (DIN 69871/DIN 69872 Form A) Spindle torque: 1000 Nm Spindle head swivels left and right: 90° Feed rate: 1 - 6000 mm/min Feed force: 30 kN Rapid traverse: 15 m/min Number of tools: 1 pc. Clamping table size L x W: 1600 x 800 mm Table load: 40 kN Operating voltage: 400 V / 50 Hz Total power requirement: 42 kW Machine weight approx.: 15.2 t Compressed air: 6.3 bar Machine dimensions (approx.) LxWxH: 3.1 x 4.7 x 2.6 m Dimensions: Coolant filter: 1.9 x 1.6 x 1.4 m Required floor space (approx.) LxWxH: approx. 38.5 m² Cgsdpfx Aou Nc Riscpsw Applications: Milling, drilling, tapping, boring with direct coded length measuring systems the guides on all 3 axes are flat guideways Milling head positioning controlled +/-90° ICS (internal coolant supply) and external cooling Nominal drive power of milling spindle: 22 kW with integrated hydraulic unit up to 100 bar operating pressure with coolant system, high-pressure pump (internal cooling) 60 bar, rated capacity 20 l/min, and low-pressure pump (external cooling) 4 bar as well as spray gun Compact belt filter RESY REBER SYSTEMATIC GmbH, type KBF 452/710 Hinged belt chip conveyor DGS, type SSF 600 P50, year 2004 Accessories: Measuring probe SK40 Reference tool SK40 Milling head SEMPUCO *

Durum: iyi (kullanılmış), Üretim yılı: 1999, Fonksiyonellik: kontrol edilmemiş, X ekseni hareket mesafesi: 6.000 mm, Y ekseni hareket mesafesi: 3.200 mm, Z ekseni hareket mesafesi: 2.050 mm, toplam uzunluk: 13.000 mm, masa uzunluğu: 5.000 mm, masa genişliği: 3.000 mm, toplam genişlik: 8.000 mm, mil hızı (dk.): 12.000 dev/dak, toplam yükseklik: 6.000 mm, masa yükü: 50.000 kg, toplam ağırlık: 120.000 kg, takım magazinindeki yuva sayısı: 32, Donanım: devir hızı sonsuz değişken, dokümantasyon / kılavuz, talaş konveyörü, HEYLIGENSTAEDT HEYMUNILL 3200-P in heavy gantry design with fixed crossbeam for machining large and heavy workpieces. Large working area with travel distances of X 6,000 mm / Y 5,000 mm / Z 1,500 mm, as well as a table size of approx. 5,000 x 3,000 mm and a table load capacity of approx. 50,000 kg. Portal clearance approx. 3,220 mm width / 2,050 mm height. 5-axis machining / milling heads A- and B-axis (swivel axes in the milling head) C-axis (360° rotation) 5-axis simultaneous machining possible (with fork-type milling head) Milling heads: Cgedpfoy Anrtex Acpow Straight milling head FK 120/340 90° angle head WFK 100/750M Fork-type head FK 100/2D Milling head magazine: 5 positions automatic milling head change Further equipment: Internal coolant supply approx. 7 bar Tool changer with 32 positions (SK50, Fibro ATC 32/50) Tool holder SK50 (DIN 69871) Tool length measuring system (laser) Chip conveyor Coolant system Adaptive feedrate control Heidenhain length measuring systems X/Y/Z.

Durum: ikinci el, Teknik detaylar: Dönme uzunluğu: 630 mm Kızak üzerinde dönüş çapı: Arka dönüş kızağı: 250 mm Yatağın üstündeki merkez yüksekliği: 270 mm Merkez genişliği: 900 mm İş mili deliği: 26 mm Hız aralığı - kademesiz değişken: 1,8 - 450 rpm Geri vites hızı: 23 / 32 / 46 / 370 / 510 / 740 rpm Çapraz besleme: 0,07 - 1,11 / 36 adım mm/dev Boylamasına ilerlemeler:: 0,063 - 0,63 / 12 adım mm/dev Punta frezesi tutucu MK: 5 Quill stroku: 250 mm Toplam güç gereksinimi: 7,0 kW Makine ağırlığı yaklaşık: 3,9 ton Makine boyutları yaklaşık UxGxY: 3,2 x 1,2 x 1,8 m Uygulama: Esas olarak kesici takımların (özellikle diş aralığı olan / olmayan ocaklar) geri tornalanması ve kabartma taşlaması için. Önden, arkadan ve makine ekseni yönünde ters tornalama ve kabartma taşlama mümkündür. Ana tahrik 8 kademeli manuel şanzıman üzerinden gerçekleşir. Besleme şanzımanı 12 kademeli manuel şanzıman olarak tasarlanmıştır. Codpfx Acsvbh N Ropogw Arka kızağın dönme aralığı = 360 derece Çapraz kızağın dönme aralığı = 360 derece Ekipman: Torna aynası Sabit uçlu tahrik diski Ø 210 mm Punta içinde sabit merkez 4 makine ayağı ile 3 çeneli ayna Ø 250 mm stokta var *